| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20251219-milos-mdss-v1-5-4537a916bdf9@fairphone.com>
Date: Fri, 19 Dec 2025 17:41:11 +0100
From: Luca Weiss <luca.weiss@...rphone.com>
To: Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>,
Rob Clark <robin.clark@....qualcomm.com>,
Dmitry Baryshkov <lumag@...nel.org>,
Abhinav Kumar <abhinav.kumar@...ux.dev>,
Jessica Zhang <jessica.zhang@....qualcomm.com>, Sean Paul <sean@...rly.run>,
Marijn Suijten <marijn.suijten@...ainline.org>,
David Airlie <airlied@...il.com>, Simona Vetter <simona@...ll.ch>,
Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>
Cc: ~postmarketos/upstreaming@...ts.sr.ht, phone-devel@...r.kernel.org,
linux-arm-msm@...r.kernel.org, linux-kernel@...r.kernel.org,
dri-devel@...ts.freedesktop.org, freedreno@...ts.freedesktop.org,
devicetree@...r.kernel.org, Luca Weiss <luca.weiss@...rphone.com>
Subject: [PATCH RFC 5/6] arm64: dts: qcom: milos: Add MDSS
Signed-off-by: Luca Weiss <luca.weiss@...rphone.com>
---
arch/arm64/boot/dts/qcom/milos.dtsi | 211 +++++++++++++++++++++++++++++++++++-
1 file changed, 209 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/milos.dtsi b/arch/arm64/boot/dts/qcom/milos.dtsi
index 0756cf5fb888..2477f0d97278 100644
--- a/arch/arm64/boot/dts/qcom/milos.dtsi
+++ b/arch/arm64/boot/dts/qcom/milos.dtsi
@@ -3,6 +3,7 @@
* Copyright (c) 2025, Luca Weiss <luca.weiss@...rphone.com>
*/
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
#include <dt-bindings/clock/qcom,milos-camcc.h>
#include <dt-bindings/clock/qcom,milos-dispcc.h>
#include <dt-bindings/clock/qcom,milos-gcc.h>
@@ -1821,6 +1822,212 @@ camcc: clock-controller@...0000 {
#power-domain-cells = <1>;
};
+ mdss: display-subsystem@...0000 {
+ compatible = "qcom,milos-mdss";
+ reg = <0x0 0x0ae00000 0x0 0x1000>;
+ reg-names = "mdss";
+
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH 0>;
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>;
+
+ resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
+
+ interconnects = <&mmss_noc MASTER_MDP QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+ &cnoc_main SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+ interconnect-names = "mdp0-mem",
+ "cpu-cfg";
+
+ power-domains = <&dispcc DISP_CC_MDSS_CORE_GDSC>;
+
+ iommus = <&apps_smmu 0x1c00 0x2>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ status = "disabled";
+
+ mdss_mdp: display-controller@...1000 {
+ compatible = "qcom,milos-dpu";
+ reg = <0x0 0x0ae01000 0x0 0x8f000>,
+ <0x0 0x0aeb0000 0x0 0x2008>;
+ reg-names = "mdp",
+ "vbif";
+
+ interrupts-extended = <&mdss 0>;
+
+ clocks = <&gcc GCC_DISP_HF_AXI_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_LUT_CLK>,
+ <&dispcc DISP_CC_MDSS_MDP_CLK>,
+ <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ clock-names = "nrt_bus",
+ "iface",
+ "lut",
+ "core",
+ "vsync";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_VSYNC_CLK>;
+ assigned-clock-rates = <19200000>;
+
+ operating-points-v2 = <&mdp_opp_table>;
+
+ power-domains = <&rpmhpd RPMHPD_CX>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ dpu_intf1_out: endpoint {
+ remote-endpoint = <&mdss_dsi0_in>;
+ };
+ };
+ };
+
+ mdp_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-342000000 {
+ opp-hz = /bits/ 64 <342000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-402000000 {
+ opp-hz = /bits/ 64 <402000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+
+ opp-535000000 {
+ opp-hz = /bits/ 64 <535000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+
+ opp-600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ required-opps = <&rpmhpd_opp_nom_l1>;
+ };
+
+ opp-630000000 {
+ opp-hz = /bits/ 64 <630000000>;
+ required-opps = <&rpmhpd_opp_turbo>;
+ };
+ };
+ };
+
+ mdss_dsi0: dsi@...4000 {
+ compatible = "qcom,milos-dsi-ctrl", "qcom,mdss-dsi-ctrl";
+ reg = <0x0 0x0ae94000 0x0 0x400>;
+ reg-names = "dsi_ctrl";
+
+ interrupts-extended = <&mdss 4>;
+
+ clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
+ <&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK>,
+ <&dispcc DISP_CC_MDSS_ESC0_CLK>,
+ <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&gcc GCC_DISP_HF_AXI_CLK>;
+ clock-names = "byte",
+ "byte_intf",
+ "pixel",
+ "core",
+ "iface",
+ "bus";
+
+ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
+ <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
+ assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+ <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
+
+ operating-points-v2 = <&mdss_dsi_opp_table>;
+
+ power-domains = <&rpmhpd RPMHPD_CX>;
+
+ phys = <&mdss_dsi0_phy>;
+ phy-names = "dsi";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ mdss_dsi0_in: endpoint {
+ remote-endpoint = <&dpu_intf1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ mdss_dsi0_out: endpoint {
+ };
+ };
+ };
+
+ mdss_dsi_opp_table: opp-table {
+ compatible = "operating-points-v2";
+
+ opp-187500000 {
+ opp-hz = /bits/ 64 <187500000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-358000000 {
+ opp-hz = /bits/ 64 <358000000>;
+ required-opps = <&rpmhpd_opp_svs_l1>;
+ };
+ };
+ };
+
+ mdss_dsi0_phy: phy@...5000 {
+ compatible = "qcom,milos-dsi-phy-4nm";
+ reg = <0x0 0x0ae95000 0x0 0x200>,
+ <0x0 0x0ae95200 0x0 0x280>,
+ <0x0 0x0ae95500 0x0 0x400>;
+ reg-names = "dsi_phy",
+ "dsi_phy_lane",
+ "dsi_pll";
+
+ clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
+ <&rpmhcc RPMH_CXO_CLK>;
+ clock-names = "iface",
+ "ref";
+
+ #clock-cells = <1>;
+ #phy-cells = <0>;
+
+ status = "disabled";
+ };
+ };
+
dispcc: clock-controller@...0000 {
compatible = "qcom,milos-dispcc";
reg = <0x0 0x0af00000 0x0 0x20000>;
@@ -1829,8 +2036,8 @@ dispcc: clock-controller@...0000 {
<&sleep_clk>,
<&gcc GCC_DISP_AHB_CLK>,
<&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>,
- <0>, /* dsi0_phy_pll_out_byteclk */
- <0>, /* dsi0_phy_pll_out_dsiclk */
+ <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+ <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
<0>, /* dp0_phy_pll_link_clk */
<0>; /* dp0_phy_pll_vco_div_clk */
--
2.52.0
Powered by blists - more mailing lists