[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <a9b29be9-e0d2-4643-a84a-55f565bf08bc@kernel.org>
Date: Fri, 19 Dec 2025 13:16:41 +0100
From: Krzysztof Kozlowski <krzk@...nel.org>
To: Vishnu Saini <vishnu.saini@....qualcomm.com>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley <conor+dt@...nel.org>
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, prahlad.valluru@....qualcomm.com,
Prahlad Valluru <vvalluru@....qualcomm.com>
Subject: Re: [PATCH v2 1/2] arm64: dts: qcom: monaco: add lt8713sx bridge with
displayport
On 19/12/2025 12:32, Vishnu Saini wrote:
> Monaco-evk has LT8713sx which act as DP to 3 DP output
> converter. Edp PHY from monaco soc is connected to lt8713sx
> as input and output of lt8713sx is connected to 3 mini DP ports.
>
> Two ports are available in mainboard and one port
> is available on Mezz board.
>
> lt8713sx is connected to soc over i2c0 and with reset gpio
> connected to pin6 of ioexpander5.
>
> Enable the edp nodes from monaco and enable lontium lt8713sx
> bridge node.
And how much time did you give to maintainers to respond to your
comments before sending v2?
You gave yourself 1 month. To the community you give 7 minutes.
That's just unacceptable.
NAK.
Best regards,
Krzysztof
Powered by blists - more mailing lists