| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20251222-vkms-all-config-v3-29-ba42dc3fb9ff@bootlin.com>
Date: Mon, 22 Dec 2025 11:11:31 +0100
From: Louis Chauvet <louis.chauvet@...tlin.com>
To: Haneen Mohammed <hamohammed.sa@...il.com>,
Simona Vetter <simona@...ll.ch>, Melissa Wen <melissa.srw@...il.com>,
Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>,
Maxime Ripard <mripard@...nel.org>, Thomas Zimmermann <tzimmermann@...e.de>,
David Airlie <airlied@...il.com>, jose.exposito89@...il.com,
Jonathan Corbet <corbet@....net>
Cc: victoria@...tem76.com, sebastian.wick@...hat.com, victoria@...tem76.com,
airlied@...il.com, thomas.petazzoni@...tlin.com,
dri-devel@...ts.freedesktop.org, linux-kernel@...r.kernel.org,
linux-doc@...r.kernel.org, Louis Chauvet <louis.chauvet@...tlin.com>,
Luca Ceresoli <luca.ceresoli@...tlin.com>
Subject: [PATCH v3 29/33] drm/vkms: Store the enabled/disabled status for
connector
In order to prepare for dynamic connector configuration, we need to store
if a connector is dynamic and if it is enabled.
The two new vkms_config_connector fields will helps for that.
Co-developed-by: José Expósito <jose.exposito89@...il.com>
Signed-off-by: José Expósito <jose.exposito89@...il.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@...tlin.com>
Signed-off-by: Louis Chauvet <louis.chauvet@...tlin.com>
---
drivers/gpu/drm/vkms/tests/vkms_config_test.c | 4 ++
drivers/gpu/drm/vkms/vkms_config.c | 6 +++
drivers/gpu/drm/vkms/vkms_config.h | 66 +++++++++++++++++++++++++++
3 files changed, 76 insertions(+)
diff --git a/drivers/gpu/drm/vkms/tests/vkms_config_test.c b/drivers/gpu/drm/vkms/tests/vkms_config_test.c
index 2b49745ee026..fda23f05a0a5 100644
--- a/drivers/gpu/drm/vkms/tests/vkms_config_test.c
+++ b/drivers/gpu/drm/vkms/tests/vkms_config_test.c
@@ -220,6 +220,10 @@ static void vkms_config_test_default_config(struct kunit *test)
0);
KUNIT_EXPECT_EQ(test, vkms_config_connector_get_edid_enabled(connector_cfg),
false);
+ KUNIT_EXPECT_EQ(test, vkms_config_connector_is_enabled(connector_cfg),
+ true);
+ KUNIT_EXPECT_EQ(test, vkms_config_connector_is_dynamic(connector_cfg),
+ false);
}
KUNIT_EXPECT_TRUE(test, vkms_config_is_valid(config));
diff --git a/drivers/gpu/drm/vkms/vkms_config.c b/drivers/gpu/drm/vkms/vkms_config.c
index adb1a384c122..8abf9efc12e6 100644
--- a/drivers/gpu/drm/vkms/vkms_config.c
+++ b/drivers/gpu/drm/vkms/vkms_config.c
@@ -588,6 +588,8 @@ static int vkms_config_show(struct seq_file *m, void *data)
vkms_config_for_each_connector(vkmsdev->config, connector_cfg) {
seq_puts(m, "connector:\n");
+ seq_printf(m, "\t%s\n",
+ str_enabled_disabled(vkms_config_connector_is_enabled(connector_cfg)));
seq_printf(m, "\tstatus=%s\n",
drm_get_connector_status_name(vkms_config_connector_get_status(connector_cfg)));
seq_printf(m, "\ttype=%s\n",
@@ -601,6 +603,8 @@ static int vkms_config_show(struct seq_file *m, void *data)
str_enabled_disabled(vkms_config_connector_get_edid_enabled(connector_cfg)),
edid_len
);
+ seq_printf(m, "\tdynamic=%s\n",
+ str_true_false(vkms_config_connector_is_dynamic(connector_cfg)));
}
return 0;
@@ -919,6 +923,8 @@ struct vkms_config_connector *vkms_config_create_connector(struct vkms_config *c
connector_cfg->status = connector_status_connected;
vkms_config_connector_set_type(connector_cfg, DRM_MODE_CONNECTOR_VIRTUAL);
vkms_config_connector_set_supported_colorspaces(connector_cfg, 0);
+ vkms_config_connector_set_dynamic(connector_cfg, false);
+ vkms_config_connector_set_enabled(connector_cfg, true);
xa_init_flags(&connector_cfg->possible_encoders, XA_FLAGS_ALLOC);
list_add_tail(&connector_cfg->link, &config->connectors);
diff --git a/drivers/gpu/drm/vkms/vkms_config.h b/drivers/gpu/drm/vkms/vkms_config.h
index 7cca1cc130b0..281434628e0e 100644
--- a/drivers/gpu/drm/vkms/vkms_config.h
+++ b/drivers/gpu/drm/vkms/vkms_config.h
@@ -131,6 +131,8 @@ struct vkms_config_encoder {
* @link: Link to the others connector in vkms_config
* @type: Store the type of connector using DRM_MODE_CONNECTOR_* values
* @config: The vkms_config this connector belongs to
+ * @dynamic: Store if a connector should be created with drm_connector_dynamic_init
+ * @enabled: If @dynamic, this means that the connector is currently registered in drm
* @status: Status (connected, disconnected...) of the connector
* @supported_colorspaces: Bitmask of all the supported colorspaces. Values
* are the sames as ones accepted by
@@ -150,6 +152,8 @@ struct vkms_config_connector {
struct vkms_config *config;
int type;
+ bool enabled;
+ bool dynamic;
enum drm_connector_status status;
u32 supported_colorspaces;
bool edid_enabled;
@@ -193,6 +197,24 @@ struct vkms_config_connector {
#define vkms_config_for_each_connector(config, connector_cfg) \
list_for_each_entry((connector_cfg), &(config)->connectors, link)
+/**
+ * vkms_config_for_each_connector_static - Iterate over the static vkms_config connectors
+ * @config: &struct vkms_config pointer
+ * @connector_cfg: &struct vkms_config_connector pointer used as cursor
+ */
+#define vkms_config_for_each_connector_static(config, connector_cfg) \
+ vkms_config_for_each_connector((config), (connector_cfg)) \
+ if (!(connector_cfg)->dynamic)
+
+/**
+ * vkms_config_for_each_connector_dynamic - Iterate over the dynamic vkms_config connectors
+ * @config: &struct vkms_config pointer
+ * @connector_cfg: &struct vkms_config_connector pointer used as cursor
+ */
+#define vkms_config_for_each_connector_dynamic(config, connector_cfg) \
+ vkms_config_for_each_connector((config), (connector_cfg)) \
+ if ((connector_cfg)->dynamic)
+
/**
* vkms_config_plane_for_each_possible_crtc - Iterate over the vkms_config_plane
* possible CRTCs
@@ -471,6 +493,50 @@ vkms_config_connector_set_type(struct vkms_config_connector *connector_cfg,
connector_cfg->type = type;
}
+/**
+ * vkms_config_connector_set_enabled() - If the connector is part of the device
+ * @crtc_cfg: Target connector
+ * @enabled: Add or remove the connector
+ */
+static inline void
+vkms_config_connector_set_enabled(struct vkms_config_connector *connector_cfg,
+ bool enabled)
+{
+ connector_cfg->enabled = enabled;
+}
+
+/**
+ * vkms_config_connector_is_enabled() - If the connector is part of the device
+ * @connector_cfg: The connector
+ */
+static inline bool
+vkms_config_connector_is_enabled(const struct vkms_config_connector *connector_cfg)
+{
+ return connector_cfg->enabled;
+}
+
+/**
+ * vkms_config_connector_set_dynamic() - If the connector is dynamic
+ * @crtc_cfg: Target connector
+ * @enabled: Enable or disable the dynamic status
+ */
+static inline void
+vkms_config_connector_set_dynamic(struct vkms_config_connector *connector_cfg,
+ bool dynamic)
+{
+ connector_cfg->dynamic = dynamic;
+}
+
+/**
+ * vkms_config_connector_is_enabled() - If the connector is dynamic
+ * @connector_cfg: The connector
+ */
+static inline bool
+vkms_config_connector_is_dynamic(struct vkms_config_connector *connector_cfg)
+{
+ return connector_cfg->dynamic;
+}
+
/*
* vkms_config_plane_get_default_rotation() - Get the default rotation for a plane
* @plane_cfg: Plane to get the default rotation from
--
2.51.2
Powered by blists - more mailing lists