| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <faddc6ce-61ce-4016-9a69-563f85bd03b4@huawei.com>
Date: Thu, 25 Dec 2025 17:03:15 +0800
From: "zhenglifeng (A)" <zhenglifeng1@...wei.com>
To: Sumit Gupta <sumitg@...dia.com>, <rafael@...nel.org>,
<viresh.kumar@...aro.org>, <lenb@...nel.org>, <robert.moore@...el.com>,
<corbet@....net>, <pierre.gondois@....com>, <rdunlap@...radead.org>,
<ray.huang@....com>, <gautham.shenoy@....com>, <mario.limonciello@....com>,
<perry.yuan@....com>, <ionela.voinescu@....com>, <zhanjie9@...ilicon.com>,
<linux-pm@...r.kernel.org>, <linux-acpi@...r.kernel.org>,
<linux-doc@...r.kernel.org>, <acpica-devel@...ts.linux.dev>,
<linux-kernel@...r.kernel.org>
CC: <linux-tegra@...r.kernel.org>, <treding@...dia.com>,
<jonathanh@...dia.com>, <vsethi@...dia.com>, <ksitaraman@...dia.com>,
<sanjayc@...dia.com>, <nhartman@...dia.com>, <bbasu@...dia.com>
Subject: Re: [PATCH v5 05/11] ACPI: CPPC: add APIs and sysfs interface for
min/max_perf
On 2025/12/23 20:13, Sumit Gupta wrote:
> Add cppc_get/set_min_perf() and cppc_get/set_max_perf() APIs to read and
> write the MIN_PERF and MAX_PERF registers.
>
> Also add sysfs interfaces (min_perf, max_perf) in cppc_cpufreq driver
> to expose these controls to userspace. The sysfs values are in frequency
> (kHz) for consistency with other cpufreq sysfs files.
>
> A mutex is used to serialize sysfs store operations to ensure hardware
> register writes and perf_ctrls updates are atomic.
>
> Signed-off-by: Sumit Gupta <sumitg@...dia.com>
> ---
> drivers/acpi/cppc_acpi.c | 44 +++++++++
> drivers/cpufreq/cppc_cpufreq.c | 160 +++++++++++++++++++++++++++++++++
> include/acpi/cppc_acpi.h | 20 +++++
> 3 files changed, 224 insertions(+)
>
> diff --git a/drivers/acpi/cppc_acpi.c b/drivers/acpi/cppc_acpi.c
> index 403ee988a8c6..9f28c20d902d 100644
> --- a/drivers/acpi/cppc_acpi.c
> +++ b/drivers/acpi/cppc_acpi.c
> @@ -1742,6 +1742,50 @@ int cppc_set_auto_sel(int cpu, bool enable)
> }
> EXPORT_SYMBOL_GPL(cppc_set_auto_sel);
>
> +/**
> + * cppc_get_min_perf - Read minimum performance register.
> + * @cpu: CPU from which to read register.
> + * @min_perf: Return address.
> + */
> +int cppc_get_min_perf(int cpu, u64 *min_perf)
> +{
> + return cppc_get_reg_val(cpu, MIN_PERF, min_perf);
> +}
> +EXPORT_SYMBOL_GPL(cppc_get_min_perf);
> +
> +/**
> + * cppc_set_min_perf - Write minimum performance register.
> + * @cpu: CPU to which to write register.
> + * @min_perf: the desired minimum performance value to be updated.
> + */
> +int cppc_set_min_perf(int cpu, u32 min_perf)
> +{
> + return cppc_set_reg_val(cpu, MIN_PERF, min_perf);
> +}
> +EXPORT_SYMBOL_GPL(cppc_set_min_perf);
> +
> +/**
> + * cppc_get_max_perf - Read maximum performance register.
> + * @cpu: CPU from which to read register.
> + * @max_perf: Return address.
> + */
> +int cppc_get_max_perf(int cpu, u64 *max_perf)
> +{
> + return cppc_get_reg_val(cpu, MAX_PERF, max_perf);
> +}
> +EXPORT_SYMBOL_GPL(cppc_get_max_perf);
> +
> +/**
> + * cppc_set_max_perf - Write maximum performance register.
> + * @cpu: CPU to which to write register.
> + * @max_perf: the desired maximum performance value to be updated.
> + */
> +int cppc_set_max_perf(int cpu, u32 max_perf)
> +{
> + return cppc_set_reg_val(cpu, MAX_PERF, max_perf);
> +}
> +EXPORT_SYMBOL_GPL(cppc_set_max_perf);
> +
> /**
> * cppc_set_enable - Set to enable CPPC on the processor by writing the
> * Continuous Performance Control package EnableRegister field.
> diff --git a/drivers/cpufreq/cppc_cpufreq.c b/drivers/cpufreq/cppc_cpufreq.c
> index a87e7bb2e2f1..1e282dfabc76 100644
> --- a/drivers/cpufreq/cppc_cpufreq.c
> +++ b/drivers/cpufreq/cppc_cpufreq.c
> @@ -28,6 +28,8 @@
>
> static struct cpufreq_driver cppc_cpufreq_driver;
>
> +static DEFINE_MUTEX(cppc_cpufreq_update_autosel_config_lock);
> +
> #ifdef CONFIG_ACPI_CPPC_CPUFREQ_FIE
> static enum {
> FIE_UNSET = -1,
> @@ -538,6 +540,46 @@ static void populate_efficiency_class(void)
> }
> #endif
>
> +/**
> + * cppc_cpufreq_set_mperf_limit - Set min/max performance limit
> + * @policy: cpufreq policy
> + * @val: performance value to set
> + * @is_min: true for min_perf, false for max_perf
> + */
> +static int cppc_cpufreq_set_mperf_limit(struct cpufreq_policy *policy, u64 val,
> + bool is_min)
> +{
> + struct cppc_cpudata *cpu_data = policy->driver_data;
> + struct cppc_perf_caps *caps = &cpu_data->perf_caps;
> + unsigned int cpu = policy->cpu;
> + u32 perf;
> + int ret;
> +
> + perf = clamp(val, caps->lowest_perf, caps->highest_perf);
> +
> + ret = is_min ? cppc_set_min_perf(cpu, perf) :
> + cppc_set_max_perf(cpu, perf);
> + if (ret) {
> + if (ret != -EOPNOTSUPP)
> + pr_warn("Failed to set %s_perf (%llu) on CPU%d (%d)\n",
> + is_min ? "min" : "max", (u64)perf, cpu, ret);
> + return ret;
> + }
> +
> + if (is_min)
> + cpu_data->perf_ctrls.min_perf = perf;
> + else
> + cpu_data->perf_ctrls.max_perf = perf;
> +
> + return 0;
> +}
> +
> +#define cppc_cpufreq_set_min_perf(policy, val) \
> + cppc_cpufreq_set_mperf_limit(policy, val, true)
> +
> +#define cppc_cpufreq_set_max_perf(policy, val) \
> + cppc_cpufreq_set_mperf_limit(policy, val, false)
> +
> static struct cppc_cpudata *cppc_cpufreq_get_cpu_data(unsigned int cpu)
> {
> struct cppc_cpudata *cpu_data;
> @@ -896,16 +938,134 @@ store_energy_performance_preference_val(struct cpufreq_policy *policy,
> buf, count);
> }
>
> +/**
> + * show_min_perf - Show minimum performance as frequency (kHz)
> + * @policy: cpufreq policy
> + * @buf: buffer to write the frequency value to
> + *
> + * Reads the MIN_PERF register and converts the performance value to
> + * frequency (kHz).
> + */
> +static ssize_t show_min_perf(struct cpufreq_policy *policy, char *buf)
> +{
> + struct cppc_cpudata *cpu_data = policy->driver_data;
> + u64 perf;
> + int ret;
> +
> + ret = cppc_get_min_perf(policy->cpu, &perf);
> + if (ret == -EOPNOTSUPP)
> + return sysfs_emit(buf, "<unsupported>\n");
> + if (ret)
> + return ret;
> +
> + /* Convert performance to frequency (kHz) for user */
> + return sysfs_emit(buf, "%u\n",
> + cppc_perf_to_khz(&cpu_data->perf_caps, perf));
> +}
> +
> +/**
> + * store_min_perf - Set minimum performance from frequency (kHz)
> + * @policy: cpufreq policy
> + * @buf: buffer containing the frequency value
> + * @count: size of @buf
> + *
> + * Converts the user-provided frequency (kHz) to a performance value
> + * and writes it to the MIN_PERF register.
> + */
> +static ssize_t store_min_perf(struct cpufreq_policy *policy, const char *buf,
> + size_t count)
> +{
> + struct cppc_cpudata *cpu_data = policy->driver_data;
> + unsigned int freq_khz;
> + u64 perf;
> + int ret;
> +
> + ret = kstrtouint(buf, 0, &freq_khz);
> + if (ret)
> + return ret;
> +
> + /* Convert frequency (kHz) to performance value */
> + perf = cppc_khz_to_perf(&cpu_data->perf_caps, freq_khz);
> +
> + guard(mutex)(&cppc_cpufreq_update_autosel_config_lock);
> + ret = cppc_cpufreq_set_min_perf(policy, perf);
Clamping value, calling cppc_set_min_perf(), setting
cpu_data->perf_ctrls.min_perf. These things can be accomplished with three
or four more lines of code here. I don't think
cppc_cpufreq_set_mperf_limit() is necessary. Same as in store_max_perf().
> + if (ret)
> + return ret;
> +
> + return count;
> +}
> +
> +/**
> + * show_max_perf - Show maximum performance as frequency (kHz)
> + * @policy: cpufreq policy
> + * @buf: buffer to write the frequency value to
> + *
> + * Reads the MAX_PERF register and converts the performance value to
> + * frequency (kHz).
> + */
> +static ssize_t show_max_perf(struct cpufreq_policy *policy, char *buf)
> +{
> + struct cppc_cpudata *cpu_data = policy->driver_data;
> + u64 perf;
> + int ret;
> +
> + ret = cppc_get_max_perf(policy->cpu, &perf);
> + if (ret == -EOPNOTSUPP)
> + return sysfs_emit(buf, "<unsupported>\n");
> + if (ret)
> + return ret;
> +
> + /* Convert performance to frequency (kHz) for user */
> + return sysfs_emit(buf, "%u\n",
> + cppc_perf_to_khz(&cpu_data->perf_caps, perf));
> +}
> +
> +/**
> + * store_max_perf - Set maximum performance from frequency (kHz)
> + * @policy: cpufreq policy
> + * @buf: buffer containing the frequency value
> + * @count: size of @buf
> + *
> + * Converts the user-provided frequency (kHz) to a performance value
> + * and writes it to the MAX_PERF register.
> + */
> +static ssize_t store_max_perf(struct cpufreq_policy *policy, const char *buf,
> + size_t count)
> +{
> + struct cppc_cpudata *cpu_data = policy->driver_data;
> + unsigned int freq_khz;
> + u64 perf;
> + int ret;
> +
> + ret = kstrtouint(buf, 0, &freq_khz);
> + if (ret)
> + return ret;
> +
> + /* Convert frequency (kHz) to performance value */
> + perf = cppc_khz_to_perf(&cpu_data->perf_caps, freq_khz);
> +
> + guard(mutex)(&cppc_cpufreq_update_autosel_config_lock);
> + ret = cppc_cpufreq_set_max_perf(policy, perf);
> + if (ret)
> + return ret;
> +
> + return count;
> +}
> +
> cpufreq_freq_attr_ro(freqdomain_cpus);
> cpufreq_freq_attr_rw(auto_select);
> cpufreq_freq_attr_rw(auto_act_window);
> cpufreq_freq_attr_rw(energy_performance_preference_val);
> +cpufreq_freq_attr_rw(min_perf);
> +cpufreq_freq_attr_rw(max_perf);
>
> static struct freq_attr *cppc_cpufreq_attr[] = {
> &freqdomain_cpus,
> &auto_select,
> &auto_act_window,
> &energy_performance_preference_val,
> + &min_perf,
> + &max_perf,
> NULL,
> };
>
> diff --git a/include/acpi/cppc_acpi.h b/include/acpi/cppc_acpi.h
> index 2860a0252313..a49b50bddaf9 100644
> --- a/include/acpi/cppc_acpi.h
> +++ b/include/acpi/cppc_acpi.h
> @@ -173,6 +173,10 @@ extern int cppc_get_auto_act_window(int cpu, u64 *auto_act_window);
> extern int cppc_set_auto_act_window(int cpu, u64 auto_act_window);
> extern int cppc_get_auto_sel(int cpu, bool *enable);
> extern int cppc_set_auto_sel(int cpu, bool enable);
> +extern int cppc_get_min_perf(int cpu, u64 *min_perf);
> +extern int cppc_set_min_perf(int cpu, u32 min_perf);
> +extern int cppc_get_max_perf(int cpu, u64 *max_perf);
> +extern int cppc_set_max_perf(int cpu, u32 max_perf);
> extern int amd_get_highest_perf(unsigned int cpu, u32 *highest_perf);
> extern int amd_get_boost_ratio_numerator(unsigned int cpu, u64 *numerator);
> extern int amd_detect_prefcore(bool *detected);
> @@ -265,6 +269,22 @@ static inline int cppc_set_auto_sel(int cpu, bool enable)
> {
> return -EOPNOTSUPP;
> }
> +static inline int cppc_get_min_perf(int cpu, u64 *min_perf)
> +{
> + return -EOPNOTSUPP;
> +}
> +static inline int cppc_set_min_perf(int cpu, u32 min_perf)
> +{
> + return -EOPNOTSUPP;
> +}
> +static inline int cppc_get_max_perf(int cpu, u64 *max_perf)
> +{
> + return -EOPNOTSUPP;
> +}
> +static inline int cppc_set_max_perf(int cpu, u32 max_perf)
> +{
> + return -EOPNOTSUPP;
> +}
> static inline int amd_get_highest_perf(unsigned int cpu, u32 *highest_perf)
> {
> return -ENODEV;
Powered by blists - more mailing lists