[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20260106152221.pfhnfndzox4kjqaz@pengutronix.de>
Date: Tue, 6 Jan 2026 16:22:21 +0100
From: Marco Felsch <m.felsch@...gutronix.de>
To: Frank Li <Frank.li@....com>
Cc: Woojung Huh <woojung.huh@...rochip.com>,
"maintainer:MICROCHIP KSZ SERIES ETHERNET SWITCH DRIVER" <UNGLinuxDriver@...rochip.com>,
Andrew Lunn <andrew@...n.ch>, Vladimir Oltean <olteanv@...il.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Marek Vasut <marex@...x.de>,
"open list:MICROCHIP KSZ SERIES ETHERNET SWITCH DRIVER" <netdev@...r.kernel.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" <devicetree@...r.kernel.org>,
open list <linux-kernel@...r.kernel.org>, imx@...ts.linux.dev,
shawnguo@...nel.org
Subject: Re: [PATCH 1/1] dt-bindings: net: dsa: microchip: Make pinctrl
'reset' optional
On 26-01-06, Frank Li wrote:
> On Tue, Jan 06, 2026 at 04:02:45PM +0100, Marco Felsch wrote:
> > Hi Frank,
> >
> > thanks for fixing this.
> >
> > On 26-01-06, Frank Li wrote:
> > > Commit e469b87e0fb0d ("dt-bindings: net: dsa: microchip: Add strap
> > > description to set SPI mode") required both 'default' and 'reset' pinctrl
> > > states for all compatible devices. However, this requirement should be only
> > > applicable to KSZ8463.
> > >
> > > Make the 'reset' pinctrl state optional for all other Microchip DSA
> > > devices while keeping it mandatory for KSZ8463.
> > >
> > > Fix below CHECK_DTBS warnings:
> > > arch/arm64/boot/dts/freescale/imx8mp-skov-basic.dtb: switch@5f (microchip,ksz9893): pinctrl-names: ['default'] is too short
> > > from schema $id: http://devicetree.org/schemas/net/dsa/microchip,ksz.yaml#
> > >
> >
> > Fixes tag?
>
> This one is only fix warning, some maintainer wants add fixes tags only for
> user visualable issue.
>
> If maintainer want, it can be added when apply, commit hash already in
> commit message.
>
> >
> > > Signed-off-by: Frank Li <Frank.Li@....com>
> > > ---
> > > Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml | 3 +++
> > > 1 file changed, 3 insertions(+)
> > >
> > > diff --git a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
> > > index a8c8009414ae0..8d4a3a9a33fcc 100644
> > > --- a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
> > > +++ b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml
> > > @@ -40,6 +40,7 @@ properties:
> > > - const: reset
> > > description:
> > > Used during reset for strap configuration.
> > > + minItems: 1
> >
> > Does this mean that all others can now either specify 'reset' or
> > 'default'? If yes, this seems wrong.
>
> No, It allow that
> case 1: "default"
> case 2: "default", "reset".
>
> Don't allow 'reset' only.
Ah okay, so it takes the list element-pos. into account, fingers
crossed, that no one is going to change the order :-)
Thanks for the info, with that:
Reviewed-by: Marco Felsch <m.felsch@...gutronix.de>
>
> Frank
>
> >
> > Regards,
> > Marco
> >
> > >
> > > reset-gpios:
> > > description:
> > > @@ -153,6 +154,8 @@ allOf:
> > > const: microchip,ksz8463
> > > then:
> > > properties:
> > > + pinctrl-names:
> > > + minItems: 2
> > > straps-rxd-gpios:
> > > description:
> > > RXD0 and RXD1 pins, used to select SPI as bus interface.
> > > --
> > > 2.34.1
> > >
> > >
> >
> > --
> > #gernperDu
> > #CallMeByMyFirstName
> >
> > Pengutronix e.K. | |
> > Steuerwalder Str. 21 | https://www.pengutronix.de/ |
> > 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
> > Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-9 |
>
--
#gernperDu
#CallMeByMyFirstName
Pengutronix e.K. | |
Steuerwalder Str. 21 | https://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-9 |
Powered by blists - more mailing lists