[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <674b8615-dcd3-4ae8-8433-cda6e8347048@oss.qualcomm.com>
Date: Wed, 7 Jan 2026 18:07:54 +0800
From: Wenmeng Liu <wenmeng.liu@....qualcomm.com>
To: Krzysztof Kozlowski <krzk@...nel.org>
Cc: Loic Poulain <loic.poulain@....qualcomm.com>,
Robert Foss <rfoss@...nel.org>, Andi Shyti <andi.shyti@...nel.org>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>,
Todor Tomov <todor.too@...il.com>,
Bryan O'Donoghue <bryan.odonoghue@...aro.org>,
Vladimir Zapolskiy <vladimir.zapolskiy@...aro.org>,
linux-i2c@...r.kernel.org, linux-arm-msm@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-media@...r.kernel.org
Subject: Re: [PATCH v2 1/4] dt-bindings: i2c: qcom-cci: Document sm6150
compatible
On 1/7/2026 4:34 PM, Krzysztof Kozlowski wrote:
> On 07/01/2026 09:17, Wenmeng Liu wrote:
>>
>>
>> On 1/7/2026 4:00 PM, Krzysztof Kozlowski wrote:
>>> On Tue, Jan 06, 2026 at 05:39:53PM +0800, Wenmeng Liu wrote:
>>>> + - if:
>>>> + properties:
>>>> + compatible:
>>>> + contains:
>>>> + enum:
>>>> + - qcom,sm6150-cci
>>>> + then:
>>>> + properties:
>>>> + clocks:
>>>> + minItems: 3
>>>> + maxItems: 3
>>>> + clock-names:
>>>> + items:
>>>> + - const: soc_ahb
>>>
>>> Same question as before. I did not see any resolution of this in
>>> changelog or commit msg.
>>>
>> Will update commit msg in next version:
>>
>> For this platform, it uses soc_ahb instead of camnoc_axi.
>
> That was not my question from v1. AHB and AXI are both bus clocks,
> meaning for this device the same. You again name the clocks how you
> called them in clock controller which is wrong. You name here CLOCK
> INPUTS. What is the role of this clock FOR THIS DEVICE?
>
> I already asked to pay attention to this difference.
>
> Best regards,
> Krzysztof
Ok, i got it, just feel a bit confused.
+ clocks = <&camcc CAM_CC_SOC_AHB_CLK>,
+ <&camcc CAM_CC_CPAS_AHB_CLK>,
+ <&camcc CAM_CC_CCI_CLK>;
+ clock-names = "camnoc_axi",
+ "cpas_ahb",
+ "cci";
clocks = <&camcc CAM_CC_SOC_AHB_CLK>,
clock-names = "camnoc_axi";
If this is acceptable, I will update it this way in the next version.
Thanks,
Wenmeng
Powered by blists - more mailing lists