[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <32f4a425-e181-41ab-913f-55e3dd3b4fd5@oss.qualcomm.com>
Date: Thu, 8 Jan 2026 11:13:51 +0530
From: Kathiravan Thirumoorthy <kathiravan.thirumoorthy@....qualcomm.com>
To: Krzysztof Kozlowski <krzysztof.kozlowski@....qualcomm.com>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley
<conor+dt@...nel.org>, linux-arm-msm@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [RFT PATCH 2/2] arm64: dts: qcom: ipq9574: Complete USB DWC3
wrapper interrupts
On 1/7/2026 12:21 AM, Krzysztof Kozlowski wrote:
> Complete interrupts for DWC3 node to match what is required by
> Devicetree bindings, as reported by dtbs_check:
>
> ipq9574-rdp433.dtb: usb@...8800 (qcom,ipq9574-dwc3): interrupt-names: ['pwr_event'] is too short
>
> The actual interrupt numbers are taken from reference manual of similar
> chip, but not IPQ9574, due to lack of access to it.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@....qualcomm.com>
>
> ---
>
> Not tested on hardware.
>
> "lack of access" = no IPQ9574 at all.
Initially the SoC was named as IPQ9048 and after sometime it is renamed
as IPQ9574. But unfortunately, the reference manual is not updated with
the new naming.
I can confirm the below interrupts are correct. So,
Reviewed-by: Kathiravan Thirumoorthy
<kathiravan.thirumoorthy@....qualcomm.com>
Thanks, Kathiravan T.
> ---
> arch/arm64/boot/dts/qcom/ipq9574.dtsi | 10 ++++++++--
> 1 file changed, 8 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> index 86c9cb9fffc9..d7278f2137ac 100644
> --- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
> @@ -765,8 +765,14 @@ usb3: usb@...8800 {
> assigned-clock-rates = <200000000>,
> <24000000>;
>
> - interrupts-extended = <&intc GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
> - interrupt-names = "pwr_event";
> + interrupts-extended = <&intc GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
> + <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
> + <&intc GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
> + <&intc GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "pwr_event",
> + "qusb2_phy",
> + "dm_hs_phy_irq",
> + "dp_hs_phy_irq";
>
> resets = <&gcc GCC_USB_BCR>;
> status = "disabled";
Powered by blists - more mailing lists