[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20260115-ten64-dts-updates-2025-12-v1-0-a56380bbb2ac@traverse.com.au>
Date: Thu, 15 Jan 2026 17:26:42 +1100
From: Mathew McBride <matt@...verse.com.au>
To: Shawn Guo <shawnguo@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>
Cc: linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, Mathew McBride <matt@...verse.com.au>
Subject: [PATCH 0/3] arm64: dts: ten64: updates for hwmon/thermal, mmc and
gpio
This series implements some changes to the Ten64 DTS:
1. Add a thermal setpoints for the fan connected to the
emc2301 fan controller.
The values described here are intended for users of the Ten64
desktop enclosure and are rather conservative, it is expected
some facility to override them (e.g via device tree overlays)
will be provided in the firmware.
2. Reduce the maximum SD/MMC bus speed to improve stability
with some microSD cards
3. Add gpio-line-names for all GPIOs that have defined purposes
(both for system purposes and those routed to the expansion header)
Signed-off-by: Mathew McBride <matt@...verse.com.au>
---
Mathew McBride (3):
arm64: dts: ten64: add emc2301 fan controller and thermal set points
arm64: dts: ten64: reduce maximum SD card speed
arm64: dts: ten64: provide gpio-line-names for all system gpios
.../arm64/boot/dts/freescale/fsl-ls1088a-ten64.dts | 111 +++++++++++++++++++++
1 file changed, 111 insertions(+)
---
base-commit: 944aacb68baf7624ab8d277d0ebf07f025ca137c
change-id: 20251203-ten64-dts-updates-2025-12-ba306e21c0e1
Best regards,
--
Mathew McBride <matt@...verse.com.au>
Powered by blists - more mailing lists