[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20260120143759.904013-7-ada@thorsis.com>
Date: Tue, 20 Jan 2026 15:37:27 +0100
From: Alexander Dahl <ada@...rsis.com>
To: Claudiu Beznea <claudiu.beznea@...on.dev>
Cc: Nicolas Ferre <nicolas.ferre@...rochip.com>,
Alexandre Belloni <alexandre.belloni@...tlin.com>,
Ryan Wanner <ryan.wanner@...rochip.com>,
linux-arm-kernel@...ts.infradead.org,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
linux-clk@...r.kernel.org,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>,
Cristian Birsan <cristian.birsan@...rochip.com>,
Varshini Rajendran <varshini.rajendran@...rochip.com>,
Balamanikandan Gunasundar <balamanikandan.gunasundar@...rochip.com>
Subject: [PATCH v3 06/19] clk: at91: Allow enabling main_rc_osc through DT
SAM9X60 Datasheet (DS60001579G) Section "23.4 Product Dependencies"
says:
"The OTPC is clocked through the Power Management Controller (PMC).
The user must power on the main RC oscillator and enable the
peripheral clock of the OTPC prior to reading or writing the OTP
memory."
The code for enabling/disabling that clock is already present, it was
just not possible to hook into DT anymore, after at91 clk devicetree
binding rework back in 2018 for kernel v4.19.
Do it for all controllers with an OTPC controller, where the main rc
oscillator is required for proper operation.
Signed-off-by: Alexander Dahl <ada@...rsis.com>
---
Notes:
v3:
- no changes
v2:
- split out dt-bindings changes into separate patch
- extend to drivers for other SoCs providing the OTPC
drivers/clk/at91/sam9x60.c | 1 +
drivers/clk/at91/sam9x7.c | 1 +
drivers/clk/at91/sama7d65.c | 1 +
drivers/clk/at91/sama7g5.c | 1 +
4 files changed, 4 insertions(+)
diff --git a/drivers/clk/at91/sam9x60.c b/drivers/clk/at91/sam9x60.c
index dbcdb1d2161a9..a9f293a8e3b26 100644
--- a/drivers/clk/at91/sam9x60.c
+++ b/drivers/clk/at91/sam9x60.c
@@ -227,6 +227,7 @@ static void __init sam9x60_pmc_setup(struct device_node *np)
50000000);
if (IS_ERR(hw))
goto err_free;
+ sam9x60_pmc->chws[SAM9X60_PMC_MAIN_RC] = hw;
hw = at91_clk_register_main_osc(regmap, "main_osc", mainxtal_name, NULL, 0);
if (IS_ERR(hw))
diff --git a/drivers/clk/at91/sam9x7.c b/drivers/clk/at91/sam9x7.c
index 07eadb712a1e4..9a5afd258cb86 100644
--- a/drivers/clk/at91/sam9x7.c
+++ b/drivers/clk/at91/sam9x7.c
@@ -764,6 +764,7 @@ static void __init sam9x7_pmc_setup(struct device_node *np)
50000000);
if (IS_ERR(hw))
goto err_free;
+ sam9x7_pmc->chws[SAM9X7_PMC_MAIN_RC] = hw;
hw = at91_clk_register_main_osc(regmap, "main_osc", mainxtal_name, NULL, 0);
if (IS_ERR(hw))
diff --git a/drivers/clk/at91/sama7d65.c b/drivers/clk/at91/sama7d65.c
index 4ccffa8db43a5..5d8973aa50a53 100644
--- a/drivers/clk/at91/sama7d65.c
+++ b/drivers/clk/at91/sama7d65.c
@@ -1135,6 +1135,7 @@ static void __init sama7d65_pmc_setup(struct device_node *np)
50000000);
if (IS_ERR(main_rc_hw))
goto err_free;
+ sama7d65_pmc->chws[SAMA7D65_PMC_MAIN_RC] = hw;
bypass = of_property_read_bool(np, "atmel,osc-bypass");
diff --git a/drivers/clk/at91/sama7g5.c b/drivers/clk/at91/sama7g5.c
index 99b4c1d9bdcca..9a6f0f30b2b7e 100644
--- a/drivers/clk/at91/sama7g5.c
+++ b/drivers/clk/at91/sama7g5.c
@@ -1014,6 +1014,7 @@ static void __init sama7g5_pmc_setup(struct device_node *np)
50000000);
if (IS_ERR(main_rc_hw))
goto err_free;
+ sama7g5_pmc->chws[SAMA7G5_PMC_MAIN_RC] = hw;
bypass = of_property_read_bool(np, "atmel,osc-bypass");
--
2.47.3
Powered by blists - more mailing lists