[<prev] [next>] [day] [month] [year] [list]
Message-ID: <20260122111423.62591-1-marex@nabladev.com>
Date: Thu, 22 Jan 2026 12:13:21 +0100
From: Marek Vasut <marex@...ladev.com>
To: linux-kernel@...r.kernel.org
Cc: Marek Vasut <marex@...ladev.com>,
stable@...r.kernel.org,
Lee Jones <lee@...nel.org>,
Pascal PAILLET-LME <p.paillet@...com>,
Paul Cercueil <paul@...pouillou.net>,
Sean Nyekjaer <sean@...nix.com>,
kernel@...electronics.com
Subject: [PATCH v3] mfd: stpmic1: Attempt system shutdown twice in case PMIC is confused
Attempt to shut down again, in case the first attempt failed.
The STPMIC1 might get confused and the first regmap_update_bits()
returns with -ETIMEDOUT / -110 . If that or similar transient
failure occurs, try to shut down again. If the second attempt
fails, there is some bigger problem, report it to user.
Cc: stable@...r.kernel.org
Fixes: 6e9df38f359a ("mfd: stpmic1: Add PMIC poweroff via sys-off handler")
Signed-off-by: Marek Vasut <marex@...ladev.com>
---
Cc: Lee Jones <lee@...nel.org>
Cc: Pascal PAILLET-LME <p.paillet@...com>
Cc: Paul Cercueil <paul@...pouillou.net>
Cc: Sean Nyekjaer <sean@...nix.com>
Cc: kernel@...electronics.com
---
V2: - Use a retry loop
- Cc stable
V3: Adjust the loop further, define STPMIC1_MAX_RETRIES, rename
the loop control variable, print error message only when the
loop ran STPMIC1_MAX_RETRIES times
---
drivers/mfd/stpmic1.c | 20 ++++++++++++++++++--
1 file changed, 18 insertions(+), 2 deletions(-)
diff --git a/drivers/mfd/stpmic1.c b/drivers/mfd/stpmic1.c
index 081827bc05961..7c677b0344c60 100644
--- a/drivers/mfd/stpmic1.c
+++ b/drivers/mfd/stpmic1.c
@@ -16,6 +16,8 @@
#include <dt-bindings/mfd/st,stpmic1.h>
+#define STPMIC1_MAX_RETRIES 2
+
#define STPMIC1_MAIN_IRQ 0
static const struct regmap_range stpmic1_readable_ranges[] = {
@@ -121,9 +123,23 @@ static const struct regmap_irq_chip stpmic1_regmap_irq_chip = {
static int stpmic1_power_off(struct sys_off_data *data)
{
struct stpmic1 *ddata = data->cb_data;
+ int ret;
+
+ /*
+ * Attempt to shut down again, in case the first attempt failed.
+ * The STPMIC1 might get confused and the first regmap_update_bits()
+ * returns with -ETIMEDOUT / -110 . If that or similar transient
+ * failure occurs, try to shut down again. If the second attempt
+ * fails, there is some bigger problem, report it to user.
+ */
+ for (int retries = 0; retries < STPMIC1_MAX_RETRIES; retries++) {
+ ret = regmap_update_bits(ddata->regmap, MAIN_CR, SOFTWARE_SWITCH_OFF,
+ SOFTWARE_SWITCH_OFF);
+ if (!ret)
+ return NOTIFY_DONE;
+ }
- regmap_update_bits(ddata->regmap, MAIN_CR,
- SOFTWARE_SWITCH_OFF, SOFTWARE_SWITCH_OFF);
+ dev_err(ddata->dev, "Failed to access PMIC I2C bus (%d)\n", ret);
return NOTIFY_DONE;
}
--
2.51.0
Powered by blists - more mailing lists