linux-kernel - [PATCH v2] usb: typec: hd3ss3220: Enable VBUS based on role state

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20260123-wip-jremmet-hd3ss3220_vbus-v2-1-bcad313ce92b@phytec.de>
Date: Fri, 23 Jan 2026 15:52:37 +0100
From: Jan Remmet <j.remmet@...tec.de>
To: Heikki Krogerus <heikki.krogerus@...ux.intel.com>, Greg Kroah-Hartman
	<gregkh@...uxfoundation.org>, Krishna Kurapati
	<krishna.kurapati@....qualcomm.com>
CC: <linux-usb@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
	<upstream@...ts.phytec.de>
Subject: [PATCH v2] usb: typec: hd3ss3220: Enable VBUS based on role state

For systems where the ID pin isn't available as gpio use the ATTACHED_STATE
register instead to control vbus.

>From the datasheet:
"This is an additional method to communicate attach other
than the ID pin. These bits can be read by the application to
determine what was attached."

Use this method if id-gpios property is not set, but the connector node
has vbus-supply defined.

Check regulator state as peripheral and detach can disable vbus.

Signed-off-by: Jan Remmet <j.remmet@...tec.de>
---
Changes in v2:
- Added check if regulator is already disabled. As detach and
  peripheral mode cause an interrupt.
- Link to v1: https://lore.kernel.org/r/20260115-wip-jremmet-hd3ss3220_vbus-v1-1-b7d9adfbe346@phytec.de
---
 drivers/usb/typec/hd3ss3220.c | 30 +++++++++++++++++++++---------
 1 file changed, 21 insertions(+), 9 deletions(-)

diff --git a/drivers/usb/typec/hd3ss3220.c b/drivers/usb/typec/hd3ss3220.c
index 3876f4faead679e6c04062ab2bcf2ae928913a0a..3e39b800e6b5f4d0cbba957c0dd66c18f781ff38 100644
--- a/drivers/usb/typec/hd3ss3220.c
+++ b/drivers/usb/typec/hd3ss3220.c
@@ -204,6 +204,23 @@ static const struct typec_operations hd3ss3220_ops = {
 	.port_type_set = hd3ss3220_port_type_set,
 };
 
+static void hd3ss3220_regulator_control(struct hd3ss3220 *hd3ss3220, bool on)
+{
+	int ret;
+
+	if (regulator_is_enabled(hd3ss3220->vbus) == on)
+		return;
+
+	if (on)
+		ret = regulator_enable(hd3ss3220->vbus);
+	else
+		ret = regulator_disable(hd3ss3220->vbus);
+
+	if (ret)
+		dev_err(hd3ss3220->dev,
+			"vbus regulator %s failed: %d\n", on ? "disable" : "enable", ret);
+}
+
 static void hd3ss3220_set_role(struct hd3ss3220 *hd3ss3220)
 {
 	enum usb_role role_state = hd3ss3220_get_attached_state(hd3ss3220);
@@ -221,6 +238,9 @@ static void hd3ss3220_set_role(struct hd3ss3220 *hd3ss3220)
 		break;
 	}
 
+	if (hd3ss3220->vbus && !hd3ss3220->id_gpiod)
+		hd3ss3220_regulator_control(hd3ss3220, role_state == USB_ROLE_HOST);
+
 	hd3ss3220->role_state = role_state;
 }
 
@@ -330,18 +350,10 @@ static const struct regmap_config config = {
 static irqreturn_t hd3ss3220_id_isr(int irq, void *dev_id)
 {
 	struct hd3ss3220 *hd3ss3220 = dev_id;
-	int ret;
 	int id;
 
 	id = gpiod_get_value_cansleep(hd3ss3220->id_gpiod);
-	if (!id)
-		ret = regulator_enable(hd3ss3220->vbus);
-	else
-		ret = regulator_disable(hd3ss3220->vbus);
-
-	if (ret)
-		dev_err(hd3ss3220->dev,
-			"vbus regulator %s failed: %d\n", id ? "disable" : "enable", ret);
+	hd3ss3220_regulator_control(hd3ss3220, !id);
 
 	return IRQ_HANDLED;
 }

---
base-commit: 944aacb68baf7624ab8d277d0ebf07f025ca137c
change-id: 20260115-wip-jremmet-hd3ss3220_vbus-732f74894acc

Best regards,
-- 
Jan Remmet <j.remmet@...tec.de>