| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <000001dc8c30$d83ce2e0$88b6a8a0$@samsung.com>
Date: Fri, 23 Jan 2026 11:53:47 +0530
From: "Pritam Manohar Sutar" <pritam.sutar@...sung.com>
To: "'Rob Herring'" <robh@...nel.org>
Cc: <alim.akhtar@...sung.com>, <conor+dt@...nel.org>, <krzk+dt@...nel.org>,
<linux-arm-kernel@...ts.infradead.org>, <rosa.pila@...sung.com>,
<selvarasu.g@...sung.com>, <linux-samsung-soc@...r.kernel.org>,
<muhammed.ali@...sung.com>, <faraz.ata@...sung.com>,
<linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
<dev.tailor@...sung.com>
Subject: RE: [PATCH v2 0/3] Add and enable USB nodes for ExynosAutov920 SoC
Hi Rob,
Thank you for your feedback on the patch series.
> -----Original Message-----
> From: Rob Herring <robh@...nel.org>
> Sent: 22 January 2026 10:46 PM
> To: Pritam Manohar Sutar <pritam.sutar@...sung.com>
> Cc: alim.akhtar@...sung.com; conor+dt@...nel.org; krzk+dt@...nel.org;
> linux-arm-kernel@...ts.infradead.org; rosa.pila@...sung.com;
> selvarasu.g@...sung.com; linux-samsung-soc@...r.kernel.org;
> muhammed.ali@...sung.com; faraz.ata@...sung.com; linux-
> kernel@...r.kernel.org; devicetree@...r.kernel.org;
> dev.tailor@...sung.com
> Subject: Re: [PATCH v2 0/3] Add and enable USB nodes for ExynosAutov920
> SoC
>
>
> On Thu, 22 Jan 2026 18:37:18 +0530, Pritam Manohar Sutar wrote:
> > This SoC has 2 USB typeC and 2 typeA ports those are DWC3 DRD
> > controllers and among them, one single USB3.1 DRD combo phy and three
> > USB2.0 only phy controllers. This patchset adds and enables USB and
> > USB-PHY nodes in dts.
> >
> > PMIC is not implemented yet, we rely on USB LDOs being enabled by the
> > bootloader and used dummy regulators for now.
> >
> > To drive vbus for host mode, it needs GPIO pin to enable vbus regulator.
> > GPIO expander is present in the dts, we used it to enable the
> > regulator using GPIO.
> >
> > USB ports are configured as OTG, and default mode is configured as
> > peripheral. It will be changed based on requirements.
> >
> > changelog
> > ----------
> > Changes in v2:
> > - As v1 was pushed 3 months back, resending this patchset.
> > - Since dependencies are merged, removed links from coverletter.
> > link for v1:
> > https://lore.kernel.org/linux-devicetree/20251024114845.2395166-1-prit
> > am.sutar@...sung.com/
> >
> > Pritam Manohar Sutar (3):
> > arm64: dts: exynos: ExynosAutov920: Add USB and USB-phy nodes
> > arm64: dts: exynos: ExynosAutov920: Add regulators for the USB
> > arm64: dts: exynos: ExynosAutov920: Enable USB nodes
> >
> > .../boot/dts/exynos/exynosautov920-sadk.dts | 160
> +++++++++++++++++
> > .../arm64/boot/dts/exynos/exynosautov920.dtsi | 162
> > ++++++++++++++++++
> > 2 files changed, 322 insertions(+)
> >
> > --
> > 2.34.1
> >
> >
> >
>
>
> My bot found new DTB warnings on the .dts files added or changed in this
> series.
>
> Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
> are fixed by another series. Ultimately, it is up to the platform maintainer
> whether these warnings are acceptable or not. No need to reply unless the
> platform maintainer has comments.
>
> If you already ran DT checks and didn't see these error(s), then make sure dt-
> schema is up to date:
>
> pip3 install dtschema --upgrade
>
>
> This patch series was applied (using b4) to base:
> Base: attempting to guess base-commit...
> Base: tags/next-20260121 (exact match)
> Base: tags/next-20260121 (use --merge-base to override)
>
> If this is not the correct base, please add 'base-commit' tag (or use b4 which
> does this automatically)
>
>
> New warnings running 'make CHECK_DTBS=y for
> arch/arm64/boot/dts/exynos/' for 20260122130721.205664-1-
> pritam.sutar@...sung.com:
>
> arch/arm64/boot/dts/exynos/exynosautov920-sadk.dtb: usb-phy0 (usb-
> nop-xceiv): '#phy-cells' is a required property
> from schema $id: https://protect2.fireeye.com/v1/url?k=91401ba9-
> cedb2354-914190e6-000babff317b-0af64cc1fcd35e1a&q=1&e=e0bf9bed-
> 20f5-431c-9a8f-
> ded53e46a366&u=http%3A%2F%2Fdevicetree.org%2Fschemas%2Fusb%2Fu
> sb-nop-xceiv.yaml
> arch/arm64/boot/dts/exynos/exynosautov920-sadk.dtb: usb-phy1 (usb-
> nop-xceiv): '#phy-cells' is a required property
> from schema $id: https://protect2.fireeye.com/v1/url?k=b208eda5-
> ed93d558-b20966ea-000babff317b-f6650041a1e910a7&q=1&e=e0bf9bed-
> 20f5-431c-9a8f-
> ded53e46a366&u=http%3A%2F%2Fdevicetree.org%2Fschemas%2Fusb%2Fu
> sb-nop-xceiv.yaml
> arch/arm64/boot/dts/exynos/exynosautov920-sadk.dtb: usb-phy2 (usb-
> nop-xceiv): '#phy-cells' is a required property
> from schema $id: https://protect2.fireeye.com/v1/url?k=ce686cfd-
> 91f35400-ce69e7b2-000babff317b-ccbf1b3c353ecfc0&q=1&e=e0bf9bed-20f5-
> 431c-9a8f-
> ded53e46a366&u=http%3A%2F%2Fdevicetree.org%2Fschemas%2Fusb%2Fu
> sb-nop-xceiv.yaml
> arch/arm64/boot/dts/exynos/exynosautov920-sadk.dtb: usb-phy3 (usb-
> nop-xceiv): '#phy-cells' is a required property
> from schema $id: https://protect2.fireeye.com/v1/url?k=633aebf3-
> 3ca1d30e-633b60bc-000babff317b-ef5a169bc853eddb&q=1&e=e0bf9bed-
> 20f5-431c-9a8f-
> ded53e46a366&u=http%3A%2F%2Fdevicetree.org%2Fschemas%2Fusb%2Fu
> sb-nop-xceiv.yaml
Apologize for any inconvenience caused by the issues you’ve identified.
Below, Have outlined the changes, will implement to address the warnings
and ensure the patch set aligns with the required standards.
Proposed Changes:
1. Will include #phy-cells = <0>; in the USB PHY nodes
(usb_phy0, usb_phy1, usb_phy2, and usb_phy3)
This is a crucial addition to avoid compilation warnings and ensure compatibility.
Example:
usb_phy0: usb-phy0 {
compatible = "usb-nop-xceiv";
#phy-cells = <0>;
vbus-supply = <&usbdrd31_dwc3_vbus>;
};
2. The errors were not caught by the make dt_binding_check and make dtbs_check
commands
make -j ARCH=arm64 dt_binding_check dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/phy/samsung,usb3-drd-phy.yaml
make -j ARCH=arm64 dt_binding_check dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/usb/samsung,exynos-dwc3.yaml
3. Once the above changes are verified and tested, I will incorporate them into the
next version of the patch set (v3).
Questions:
1. Are the Proposed Changes Correct?
Please confirm if the inclusion of #phy-cells = <0>; in the USB PHY nodes is the correct
fix for the issue. If there are additional changes required, kindly let me know.
2. Why Warnings Were Not Captured During Initial Checks?
The make dt_binding_check and make dtbs_check commands did not flag the warnings,
which suggests the schema or bindings might not be comprehensive enough. Could you
provide insights or recommendations on how to improve the schema to catch such issues
in the future?
>
>
>
>
Thank you for your valuable input. I’ll proceed with the changes and provide an updated
patch set once the fixes are confirmed. Please let me know if there’s anything else I need
to consider or address.
Regards,
Pritam
Powered by blists - more mailing lists