lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <aXubxxvWzQpbOjkd@lizhi-Precision-Tower-5810>
Date: Thu, 29 Jan 2026 12:41:27 -0500
From: Frank Li <Frank.li@....com>
To: ziniu.wang_1@....com
Cc: shawnguo@...nel.org, s.hauer@...gutronix.de, robh@...nel.org,
	krzk+dt@...nel.org, conor+dt@...nel.org, kernel@...gutronix.de,
	festevam@...il.com, devicetree@...r.kernel.org, imx@...ts.linux.dev,
	linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 1/3] arm64: dts: imx93-9x9-qsb: change usdhc tuning
 step for eMMC and SD

On Thu, Jan 29, 2026 at 04:04:37PM +0800, ziniu.wang_1@....com wrote:
> From: Luke Wang <ziniu.wang_1@....com>
>
> During system resume, the following errors occurred:
>
>   [  430.638625] mmc1: error -84 writing Cache Enable bit
>   [  430.643618] mmc1: error -84 doing runtime resume
>
> For eMMC and SD, there are two tuning pass windows and the gap between
> those two windows may only have one cell. If tuning step > 1, the gap may
> just be skipped and host assumes those two windows as a continuous
> windows. This will cause a wrong delay cell near the gap to be selected.
>
> Set the tuning step to 1 to avoid selecting the wrong delay cell.
>
> For SDIO, the gap is sufficiently large, so the default tuning step does
> not cause this issue.
>
> Signed-off-by: Luke Wang <ziniu.wang_1@....com>
> ---
Reviewed-by: Frank Li <Frank.Li@....com>
>  arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts | 2 ++
>  1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts b/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts
> index 0852067eab2c..197c8f8b7f66 100644
> --- a/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts
> +++ b/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts
> @@ -507,6 +507,7 @@ &usdhc1 {
>  	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
>  	bus-width = <8>;
>  	non-removable;
> +	fsl,tuning-step = <1>;
>  	status = "okay";
>  };
>
> @@ -519,6 +520,7 @@ &usdhc2 {
>  	vmmc-supply = <&reg_usdhc2_vmmc>;
>  	bus-width = <4>;
>  	no-mmc;
> +	fsl,tuning-step = <1>;
>  	status = "okay";
>  };
>
> --
> 2.34.1
>

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ