lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Date:	Fri, 04 May 2007 17:52:58 -0700
From:	"Michael Chan" <mchan@...adcom.com>
To:	davem@...emloft.net, netdev@...r.kernel.org
Subject: [PATCH 5/11][TG3]: Remove reset during MAC address changes.

[TG3]: Remove reset during MAC address changes.

The reset was added a while back so that ASF could re-init whatever
MAC address it wanted to use after the MAC address was changed.
Instead of resetting, we can just keep MAC address 1 unchanged during
MAC address changes if MAC address 1 is different from MAC address 0.

This fixes 2 problems:

1. Bonding calls set_mac_address in contexts that cannot sleep.
It no longer sleeps with the chip reset removed.

2. When ASF shares the same MAC address as the NIC, it needs to
always do that even when the MAC address is changed. 

Signed-off-by: Michael Chan <mchan@...adcom.com>

diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index e829262..6094d6b 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -5934,7 +5934,7 @@ static int tg3_load_tso_firmware(struct tg3 *tp)
 
 
 /* tp->lock is held. */
-static void __tg3_set_mac_addr(struct tg3 *tp)
+static void __tg3_set_mac_addr(struct tg3 *tp, int skip_mac_1)
 {
 	u32 addr_high, addr_low;
 	int i;
@@ -5946,6 +5946,8 @@ static void __tg3_set_mac_addr(struct tg3 *tp)
 		    (tp->dev->dev_addr[4] <<  8) |
 		    (tp->dev->dev_addr[5] <<  0));
 	for (i = 0; i < 4; i++) {
+		if (i == 1 && skip_mac_1)
+			continue;
 		tw32(MAC_ADDR_0_HIGH + (i * 8), addr_high);
 		tw32(MAC_ADDR_0_LOW + (i * 8), addr_low);
 	}
@@ -5972,7 +5974,7 @@ static int tg3_set_mac_addr(struct net_device *dev, void *p)
 {
 	struct tg3 *tp = netdev_priv(dev);
 	struct sockaddr *addr = p;
-	int err = 0;
+	int err = 0, skip_mac_1 = 0;
 
 	if (!is_valid_ether_addr(addr->sa_data))
 		return -EINVAL;
@@ -5983,22 +5985,21 @@ static int tg3_set_mac_addr(struct net_device *dev, void *p)
 		return 0;
 
 	if (tp->tg3_flags & TG3_FLAG_ENABLE_ASF) {
-		/* Reset chip so that ASF can re-init any MAC addresses it
-		 * needs.
-		 */
-		tg3_netif_stop(tp);
-		tg3_full_lock(tp, 1);
+		u32 addr0_high, addr0_low, addr1_high, addr1_low;
 
-		tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
-		err = tg3_restart_hw(tp, 0);
-		if (!err)
-			tg3_netif_start(tp);
-		tg3_full_unlock(tp);
-	} else {
-		spin_lock_bh(&tp->lock);
-		__tg3_set_mac_addr(tp);
-		spin_unlock_bh(&tp->lock);
+		addr0_high = tr32(MAC_ADDR_0_HIGH);
+		addr0_low = tr32(MAC_ADDR_0_LOW);
+		addr1_high = tr32(MAC_ADDR_1_HIGH);
+		addr1_low = tr32(MAC_ADDR_1_LOW);
+
+		/* Skip MAC addr 1 if ASF is using it. */
+		if ((addr0_high != addr1_high || addr0_low != addr1_low) &&
+		    !(addr1_high == 0 && addr1_low == 0))
+			skip_mac_1 = 1;
 	}
+	spin_lock_bh(&tp->lock);
+	__tg3_set_mac_addr(tp, skip_mac_1);
+	spin_unlock_bh(&tp->lock);
 
 	return err;
 }
@@ -6315,7 +6316,7 @@ static int tg3_reset_hw(struct tg3 *tp, int reset_phy)
 		     tp->rx_jumbo_ptr);
 
 	/* Initialize MAC address and backoff seed. */
-	__tg3_set_mac_addr(tp);
+	__tg3_set_mac_addr(tp, 0);
 
 	/* MTU + ethernet header + FCS + optional VLAN tag */
 	tw32(MAC_RX_MTU_SIZE, tp->dev->mtu + ETH_HLEN + 8);


-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ