| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20070806185553.GA1276@hall.aurel32.net>
Date: Mon, 6 Aug 2007 20:55:53 +0200
From: Aurelien Jarno <aurelien@...el32.net>
To: Michael Buesch <mb@...sch.de>
Cc: netdev@...r.kernel.org, Felix Fietkau <nbd@...nwrt.org>
Subject: [PATCH 1/3] SSB EXTIF timing & serial port initialization (v2)
The patch below adds a new file drivers/ssb/driver_extif.c which
contains new SSB EXTIF functions to initializes the timing and the
serial ports.
Cc: Felix Fietkau <nbd@...nwrt.org>
Signed-off-by: Aurelien Jarno <aurelien@...el32.net>
--- a/drivers/ssb/driver_extif.c
+++ b/drivers/ssb/driver_extif.c
@@ -0,0 +1,104 @@
+/*
+ * Sonics Silicon Backplane
+ * Broadcom EXTIF core driver
+ *
+ * Copyright 2005, Broadcom Corporation
+ * Copyright 2006, 2007, Michael Buesch <mb@...sch.de>
+ * Copyright 2006, 2007, Felix Fietkau <nbd@...nwrt.org>
+ * Copyright 2007, Aurelien Jarno <aurelien@...el32.net>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <linux/serial_reg.h>
+
+#include "ssb_private.h"
+
+
+static inline u32 extif_read32(struct ssb_extif *extif, u16 offset)
+{
+ return ssb_read32(extif->dev, offset);
+}
+
+static inline void extif_write32(struct ssb_extif *extif, u16 offset, u32 value)
+{
+ ssb_write32(extif->dev, offset, value);
+}
+
+#ifdef CONFIG_SSB_SERIAL
+static bool serial_exists(u8 *regs)
+{
+ u8 save_mcr, msr = 0;
+
+ if (regs) {
+ save_mcr = regs[UART_MCR];
+ regs[UART_MCR] = (UART_MCR_LOOP | UART_MCR_OUT2 | UART_MCR_RTS);
+ msr = regs[UART_MSR] & (UART_MSR_DCD | UART_MSR_RI
+ | UART_MSR_CTS | UART_MSR_DSR);
+ regs[UART_MCR] = save_mcr;
+ }
+ return (msr == (UART_MSR_DCD | UART_MSR_CTS));
+}
+
+int ssb_extif_serial_init(struct ssb_extif *extif, struct ssb_serial_port *ports)
+{
+ u32 i, nr_ports = 0;
+
+ /* Disable GPIO interrupt initially */
+ extif_write32(extif, SSB_EXTIF_GPIO_INTPOL, 0);
+ extif_write32(extif, SSB_EXTIF_GPIO_INTMASK, 0);
+
+ for (i = 0; i < 2; i++) {
+ void __iomem *uart_regs;
+
+ uart_regs = ioremap_nocache(SSB_EUART, 16);
+ if (uart_regs) {
+ uart_regs += (i * 8);
+
+ if (serial_exists(uart_regs) && ports) {
+ extif_write32(extif, SSB_EXTIF_GPIO_INTMASK, 2);
+
+ nr_ports++;
+ ports[i].regs = uart_regs;
+ ports[i].irq = 2;
+ ports[i].baud_base = 13500000;
+ ports[i].reg_shift = 0;
+ }
+ iounmap(uart_regs);
+ }
+ }
+ return nr_ports;
+}
+#endif /* CONFIG_SSB_SERIAL */
+
+void ssb_extif_timing_init(struct ssb_extif *extif, unsigned long ns)
+{
+ u32 tmp;
+
+ /* Initialize extif so we can get to the LEDs and external UART */
+ extif_write32(extif, SSB_EXTIF_PROG_CFG, SSB_EXTCFG_EN);
+
+ /* Set timing for the flash */
+ tmp = DIV_ROUND_UP(10, ns) << SSB_PROG_WCNT_3_SHIFT;
+ tmp |= DIV_ROUND_UP(40, ns) << SSB_PROG_WCNT_1_SHIFT;
+ tmp |= DIV_ROUND_UP(120, ns);
+ extif_write32(extif, SSB_EXTIF_PROG_WAITCNT, tmp);
+
+ /* Set programmable interface timing for external uart */
+ tmp = DIV_ROUND_UP(10, ns) << SSB_PROG_WCNT_3_SHIFT;
+ tmp |= DIV_ROUND_UP(20, ns) << SSB_PROG_WCNT_2_SHIFT;
+ tmp |= DIV_ROUND_UP(100, ns) << SSB_PROG_WCNT_1_SHIFT;
+ tmp |= DIV_ROUND_UP(120, ns);
+ extif_write32(extif, SSB_EXTIF_PROG_WAITCNT, tmp);
+}
+
+void ssb_extif_get_clockcontrol(struct ssb_extif *extif,
+ u32 *pll_type, u32 *n, u32 *m)
+{
+ *pll_type = SSB_PLLTYPE_1;
+ *n = extif_read32(extif, SSB_EXTIF_CLOCK_N);
+ *m = extif_read32(extif, SSB_EXTIF_CLOCK_SB);
+}
+
--- a/drivers/ssb/Makefile
+++ b/drivers/ssb/Makefile
@@ -7,7 +7,7 @@
# built-in drivers
ssb-y += driver_chipcommon.o
-ssb-$(CONFIG_SSB_DRIVER_MIPS) += driver_mipscore.o
+ssb-$(CONFIG_SSB_DRIVER_MIPS) += driver_mipscore.o driver_extif.o
ssb-$(CONFIG_SSB_DRIVER_PCICORE) += driver_pcicore.o
obj-$(CONFIG_SSB) += ssb.o
--- a/include/linux/ssb/ssb_driver_extif.h
+++ b/include/linux/ssb/ssb_driver_extif.h
@@ -156,5 +156,15 @@
/* watchdog */
#define SSB_EXTIF_WATCHDOG_CLK 48000000 /* Hz */
+extern void ssb_extif_get_clockcontrol(struct ssb_extif *extif,
+ u32 *plltype, u32 *n, u32 *m);
+
+extern void ssb_extif_timing_init(struct ssb_extif *extif,
+ unsigned long ns);
+
+#ifdef CONFIG_SSB_SERIAL
+extern int ssb_extif_serial_init(struct ssb_extif *extif,
+ struct ssb_serial_port *ports);
+#endif /* CONFIG_SSB_SERIAL */
#endif /* LINUX_SSB_EXTIFCORE_H_ */
--
.''`. Aurelien Jarno | GPG: 1024D/F1BCDB73
: :' : Debian developer | Electrical Engineer
`. `' aurel32@...ian.org | aurelien@...el32.net
`- people.debian.org/~aurel32 | www.aurel32.net
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists