| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20070824135649.509e1fe7@freepuppy.rosehill.hemminger.net>
Date: Fri, 24 Aug 2007 13:56:49 -0700
From: Stephen Hemminger <shemminger@...ux-foundation.org>
To: Francois Romieu <romieu@...zoreil.com>
Cc: netdev@...r.kernel.org
Subject: [PATCH] via-velocity: use standard VLAN interface (resend)
The via-velocity is using a non-standard VLAN interface configured
via module parameters (yuck).
Replace with the standard acceleration interface.
It solves a number of problems with being able to handle multiple
vlans, and dynamically reconfigure.
This is compile tested only, don't have this board.
Signed-off-by: Stephen Hemminger <shemminger@...ux-foundation.org>
---
drivers/net/via-velocity.c | 71 +++++++++++++++++++++++++++------------------
drivers/net/via-velocity.h | 3 +
2 files changed, 45 insertions(+), 29 deletions(-)
--- a/drivers/net/via-velocity.c 2007-08-18 07:50:10.000000000 -0700
+++ b/drivers/net/via-velocity.c 2007-08-24 13:49:17.000000000 -0700
@@ -72,6 +72,7 @@
#include <linux/mii.h>
#include <linux/in.h>
#include <linux/if_arp.h>
+#include <linux/if_vlan.h>
#include <linux/ip.h>
#include <linux/tcp.h>
#include <linux/udp.h>
@@ -111,15 +112,6 @@ VELOCITY_PARAM(RxDescriptors, "Number of
#define TX_DESC_DEF 64
VELOCITY_PARAM(TxDescriptors, "Number of transmit descriptors");
-#define VLAN_ID_MIN 0
-#define VLAN_ID_MAX 4095
-#define VLAN_ID_DEF 0
-/* VID_setting[] is used for setting the VID of NIC.
- 0: default VID.
- 1-4094: other VIDs.
-*/
-VELOCITY_PARAM(VID_setting, "802.1Q VLAN ID");
-
#define RX_THRESH_MIN 0
#define RX_THRESH_MAX 3
#define RX_THRESH_DEF 0
@@ -147,13 +139,6 @@ VELOCITY_PARAM(rx_thresh, "Receive fifo
*/
VELOCITY_PARAM(DMA_length, "DMA length");
-#define TAGGING_DEF 0
-/* enable_tagging[] is used for enabling 802.1Q VID tagging.
- 0: disable VID seeting(default).
- 1: enable VID setting.
-*/
-VELOCITY_PARAM(enable_tagging, "Enable 802.1Q tagging");
-
#define IP_ALIG_DEF 0
/* IP_byte_align[] is used for IP header DWORD byte aligned
0: indicate the IP header won't be DWORD byte aligned.(Default) .
@@ -442,8 +427,7 @@ static void __devinit velocity_get_optio
velocity_set_int_opt(&opts->DMA_length, DMA_length[index], DMA_LENGTH_MIN, DMA_LENGTH_MAX, DMA_LENGTH_DEF, "DMA_length", devname);
velocity_set_int_opt(&opts->numrx, RxDescriptors[index], RX_DESC_MIN, RX_DESC_MAX, RX_DESC_DEF, "RxDescriptors", devname);
velocity_set_int_opt(&opts->numtx, TxDescriptors[index], TX_DESC_MIN, TX_DESC_MAX, TX_DESC_DEF, "TxDescriptors", devname);
- velocity_set_int_opt(&opts->vid, VID_setting[index], VLAN_ID_MIN, VLAN_ID_MAX, VLAN_ID_DEF, "VID_setting", devname);
- velocity_set_bool_opt(&opts->flags, enable_tagging[index], TAGGING_DEF, VELOCITY_FLAGS_TAGGING, "enable_tagging", devname);
+
velocity_set_bool_opt(&opts->flags, txcsum_offload[index], TX_CSUM_DEF, VELOCITY_FLAGS_TX_CSUM, "txcsum_offload", devname);
velocity_set_int_opt(&opts->flow_cntl, flow_control[index], FLOW_CNTL_MIN, FLOW_CNTL_MAX, FLOW_CNTL_DEF, "flow_control", devname);
velocity_set_bool_opt(&opts->flags, IP_byte_align[index], IP_ALIG_DEF, VELOCITY_FLAGS_IP_ALIGN, "IP_byte_align", devname);
@@ -465,6 +449,7 @@ static void __devinit velocity_get_optio
static void velocity_init_cam_filter(struct velocity_info *vptr)
{
struct mac_regs __iomem * regs = vptr->mac_regs;
+ unsigned short vid;
/* Turn on MCFG_PQEN, turn off MCFG_RTGOPT */
WORD_REG_BITS_SET(MCFG_PQEN, MCFG_RTGOPT, ®s->MCFG);
@@ -477,13 +462,19 @@ static void velocity_init_cam_filter(str
mac_set_cam_mask(regs, vptr->mCAMmask, VELOCITY_MULTICAST_CAM);
/* Enable first VCAM */
- if (vptr->flags & VELOCITY_FLAGS_TAGGING) {
- /* If Tagging option is enabled and VLAN ID is not zero, then
- turn on MCFG_RTGOPT also */
- if (vptr->options.vid != 0)
- WORD_REG_BITS_ON(MCFG_RTGOPT, ®s->MCFG);
+ if (vptr->vlgrp) {
+ for (vid = 0; vid < VLAN_VID_MASK; vid++) {
+ if (vlan_group_get_device(vptr->vlgrp, vid)) {
+ /* If Tagging option is enabled and
+ VLAN ID is not zero, then
+ turn on MCFG_RTGOPT also */
+ if (vid != 0)
+ WORD_REG_BITS_ON(MCFG_RTGOPT, ®s->MCFG);
- mac_set_cam(regs, 0, (u8 *) & (vptr->options.vid), VELOCITY_VLAN_ID_CAM);
+ mac_set_cam(regs, 0, (u8 *) &vid,
+ VELOCITY_VLAN_ID_CAM);
+ }
+ }
vptr->vCAMmask[0] |= 1;
mac_set_cam_mask(regs, vptr->vCAMmask, VELOCITY_VLAN_ID_CAM);
} else {
@@ -494,6 +485,26 @@ static void velocity_init_cam_filter(str
}
}
+static void velocity_vlan_rx_add_vid(struct net_device *dev, unsigned short vid)
+{
+ struct velocity_info *vptr = netdev_priv(dev);
+
+ spin_lock_irq(&vptr->lock);
+ velocity_init_cam_filter(vptr);
+ spin_unlock_irq(&vptr->lock);
+}
+
+static void velocity_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid)
+{
+ struct velocity_info *vptr = netdev_priv(dev);
+
+ spin_lock_irq(&vptr->lock);
+ vlan_group_set_device(vptr->vlgrp, vid, NULL);
+ velocity_init_cam_filter(vptr);
+ spin_unlock_irq(&vptr->lock);
+}
+
+
/**
* velocity_rx_reset - handle a receive reset
* @vptr: velocity we are resetting
@@ -791,13 +802,17 @@ static int __devinit velocity_found1(str
dev->do_ioctl = velocity_ioctl;
dev->ethtool_ops = &velocity_ethtool_ops;
dev->change_mtu = velocity_change_mtu;
+
+ dev->vlan_rx_add_vid = velocity_vlan_rx_add_vid;
+ dev->vlan_rx_kill_vid = velocity_vlan_rx_kill_vid;
+
#ifdef VELOCITY_ZERO_COPY_SUPPORT
dev->features |= NETIF_F_SG;
#endif
+ dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_FILTER;
- if (vptr->flags & VELOCITY_FLAGS_TX_CSUM) {
+ if (vptr->flags & VELOCITY_FLAGS_TX_CSUM)
dev->features |= NETIF_F_IP_CSUM;
- }
ret = register_netdev(dev);
if (ret < 0)
@@ -1994,8 +2009,8 @@ static int velocity_xmit(struct sk_buff
td_ptr->tdesc1.CMDZ = 2;
}
- if (vptr->flags & VELOCITY_FLAGS_TAGGING) {
- td_ptr->tdesc1.pqinf.VID = (vptr->options.vid & 0xfff);
+ if (vptr->vlgrp && vlan_tx_tag_present(skb)) {
+ td_ptr->tdesc1.pqinf.VID = vlan_tx_tag_get(skb);
td_ptr->tdesc1.pqinf.priority = 0;
td_ptr->tdesc1.pqinf.CFI = 0;
td_ptr->tdesc1.TCR |= TCR0_VETAG;
--- a/drivers/net/via-velocity.h 2007-07-10 09:40:38.000000000 -0700
+++ b/drivers/net/via-velocity.h 2007-08-24 13:49:17.000000000 -0700
@@ -1701,7 +1701,7 @@ struct velocity_opt {
int numrx; /* Number of RX descriptors */
int numtx; /* Number of TX descriptors */
enum speed_opt spd_dpx; /* Media link mode */
- int vid; /* vlan id */
+
int DMA_length; /* DMA length */
int rx_thresh; /* RX_THRESH */
int flow_cntl;
@@ -1727,6 +1727,7 @@ struct velocity_info {
dma_addr_t tx_bufs_dma;
u8 *tx_bufs;
+ struct vlan_group *vlgrp;
u8 ip_addr[4];
enum chip_type chip_id;
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists