| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20071127220954.4f075056@freepuppy.rosehill>
Date: Tue, 27 Nov 2007 22:09:54 -0800
From: Stephen Hemminger <shemminger@...ux-foundation.org>
To: Ben Hutchings <bhutchings@...arflare.com>
Cc: netdev@...r.kernel.org, linux-net-drivers@...arflare.com
Subject: Re: [PATCH] [RFC] New driver "sfc" for Solarstorm SFC4000
controller
On Fri, 23 Nov 2007 17:08:15 +0000
Ben Hutchings <bhutchings@...arflare.com> wrote:
> This is a net driver (and MTD driver, sfc_mtd) for our SFC4000 10G
> Ethernet controller, branded "Solarstorm", with various PHYs. It is
> intended to support our NIC reference designs SFE4001 (10GBASE-T),
> SFE4002 (XFP), SFE4003 (10GBASE-CX4), OEM designs based on them, and
> some development boards. We have been maintaining drivers out-of-tree
> for some time but are now preparing them to work in-tree.
>
> There are some issues that might need to be addressed:
>
> 1. When we enable NAPI polling, we need to set __LINK_STATE_START in
> the net device used for NAPI. This bit is commented as private in
> netdevice.h, but e1000 also does this. Is this incorrect?
Why are you using it directly?
> 2. We added a lot of definitions and code for 10G MDIO. This is mostly
> generic and could be moved into core code.
>
> We welcome review comments and are ready to address them.
>
> The patch (against net-2.6.25) is at:
> https://support.solarflare.com/netdev/net-2.6.25-sfc-2.2.0019.patch
>
> The new files may also be downloaded as a tarball:
> https://support.solarflare.com/netdev/net-2.6.25-sfc-2.2.0019.tar.gz
>
> And for verification there is:
> https://support.solarflare.com/netdev/MD5SUMS
>
> Ben.
>
The driver is pretty big (28K loc), and non trivial to get a good review.
Minor note:
* use u8 not uint8_t (etc.)
* gone overboard with docbook style comments, they are only needed
on external API's.
* why are you exporting symbol's?
* Please use dev_err() rather than reinventing own message macros.
Trivial warnings from checkpatch.
WARNING: line over 80 characters
#177: FILE: drivers/net/sfc/alaska.c:68:
+ phy_ext = gmii->mdio_read(gmii->dev, gmii->phy_id, ALASKA_EXTENDED_CONTROL);
WARNING: line over 80 characters
#182: FILE: drivers/net/sfc/alaska.c:73:
+ gmii->mdio_write(gmii->dev, gmii->phy_id, ALASKA_EXTENDED_CONTROL, phy_ext);
WARNING: line over 80 characters
#282: FILE: drivers/net/sfc/alaska.c:173:
+ phy_spec = gmii->mdio_read(gmii->dev, gmii->phy_id, ALASKA_PHY_SPECIFIC);
WARNING: line over 80 characters
#284: FILE: drivers/net/sfc/alaska.c:175:
+ gmii->mdio_write(gmii->dev, gmii->phy_id, ALASKA_PHY_SPECIFIC, phy_spec);
WARNING: do not add new typedefs
#477: FILE: drivers/net/sfc/bitfield.h:106:
+typedef union efx_dword {
WARNING: do not add new typedefs
#486: FILE: drivers/net/sfc/bitfield.h:115:
+typedef union efx_qword {
WARNING: do not add new typedefs
#497: FILE: drivers/net/sfc/bitfield.h:126:
+typedef union efx_oword {
ERROR: Macros with complex values should be enclosed in parenthesis
#519: FILE: drivers/net/sfc/bitfield.h:148:
+ ((unsigned int) le32_to_cpu((qword).u32[1])), \
ERROR: Macros with complex values should be enclosed in parenthesis
#524: FILE: drivers/net/sfc/bitfield.h:153:
+ ((unsigned int) le32_to_cpu((oword).u32[3])), \
ERROR: Macros with complex values should be enclosed in parenthesis
#691: FILE: drivers/net/sfc/bitfield.h:320:
+#define EFX_INSERT_FIELDS_NATIVE(min, max, \
+ field1, value1, \
+ field2, value2, \
+ field3, value3, \
+ field4, value4, \
+ field5, value5, \
+ field6, value6, \
+ field7, value7, \
+ field8, value8, \
+ field9, value9, \
+ field10, value10) \
WARNING: line over 80 characters
#1237: FILE: drivers/net/sfc/boards.c:286:
+#define SFE4005_PORTSEL (1 << 7) /* Which port to use (for Rx in BCAST mode) */
WARNING: line over 80 characters
#1242: FILE: drivers/net/sfc/boards.c:291:
+#define SFE4005_CX4uC_nRESET (1 << 15) /* Reset the microcontroller on CX4 chip */
WARNING: do not add new typedefs
#1440: FILE: drivers/net/sfc/boards.h:35:
+typedef enum {
WARNING: do not add new typedefs
#2467: FILE: drivers/net/sfc/debugfs.h:43:
+typedef int efx_debugfs_reader(struct seq_file *, void *);
WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
#2809: FILE: drivers/net/sfc/driverlink.c:189:
+EXPORT_SYMBOL(efx_dl_unregister_driver);
WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
#2854: FILE: drivers/net/sfc/driverlink.c:234:
+EXPORT_SYMBOL(efx_dl_register_driver);
WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
#3050: FILE: drivers/net/sfc/driverlink.c:430:
+EXPORT_SYMBOL(efx_dl_unregister_callbacks);
WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
#3122: FILE: drivers/net/sfc/driverlink.c:502:
+EXPORT_SYMBOL(efx_dl_register_callbacks);
WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
#3141: FILE: drivers/net/sfc/driverlink.c:521:
+EXPORT_SYMBOL(efx_dl_schedule_reset);
WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable
#3234: FILE: drivers/net/sfc/driverlink.c:614:
+EXPORT_SYMBOL(efx_dl_get_nic_port);
ERROR: trailing whitespace
#3399: FILE: drivers/net/sfc/driverlink_api.h:56:
+ * then that client can return failure frmo it's #efx_dl_driver::probe $
ERROR: trailing whitespace
#3413: FILE: drivers/net/sfc/driverlink_api.h:70:
+ * from an error condition. The client's efx_dl_driver::reset_suspend() $
ERROR: trailing whitespace
#3477: FILE: drivers/net/sfc/driverlink_api.h:134:
+^I * efx_dl_dev->priv (which is not shared between clients). $
WARNING: line over 80 characters
#3909: FILE: drivers/net/sfc/driverlink_api.h:566:
+ * efx_dl_for_each_device_info_matching(dev_info, EFX_DL_FALCON_RESOURCES,
ERROR: Macros with complex values should be enclosed in parenthesis
#3920: FILE: drivers/net/sfc/driverlink_api.h:577:
+#define efx_dl_for_each_device_info_matching(_dev_info, _type, \
+ _info_type, _field, _p) \
ERROR: trailing whitespace
#3935: FILE: drivers/net/sfc/driverlink_api.h:592:
+ * $
ERROR: Macros with complex values should be enclosed in parenthesis
#3944: FILE: drivers/net/sfc/driverlink_api.h:601:
+ efx_dl_for_each_device_info_matching(_dev_info, _type, \
+ _info_type, _field, _p) \
ERROR: do not initialise statics to 0 or NULL
#4174: FILE: drivers/net/sfc/efx.c:220:
+static unsigned int allow_bad_hwaddr = 0;
ERROR: do not initialise statics to 0 or NULL
#4207: FILE: drivers/net/sfc/efx.c:253:
+static unsigned int allow_load_on_failure = 0;
ERROR: do not initialise statics to 0 or NULL
#4221: FILE: drivers/net/sfc/efx.c:267:
+static unsigned int interrupt_mode = 0;
ERROR: do not initialise statics to 0 or NULL
#4276: FILE: drivers/net/sfc/efx.c:322:
+static unsigned int rss_cpus = 0;
WARNING: line over 80 characters
#5793: FILE: drivers/net/sfc/efx.c:1839:
+ /* net_dev is not currently created yet, so provide a dummy mtu */
WARNING: line over 80 characters
#7881: FILE: drivers/net/sfc/enum.h:89:
+ RESET_TYPE_ALL = 1, /* Reset everything but PCI core blocks in Falcon */
WARNING: line over 80 characters
#7882: FILE: drivers/net/sfc/enum.h:90:
+ RESET_TYPE_WORLD = 2, /* Reset everything, save and restore config space */
WARNING: line over 80 characters
#7889: FILE: drivers/net/sfc/enum.h:97:
+ RESET_TYPE_RX_RECOVERY, /* Reset to recover from RX datapath errors */
WARNING: do not add new typedefs
#7958: FILE: drivers/net/sfc/ethtool.c:59:
+typedef struct {
ERROR: need consistent spacing around '*' (ctx:WxB)
#7989: FILE: drivers/net/sfc/ethtool.c:90:
+ &((struct efx_##source_name *) 0)->field) ? \
^
ERROR: do not initialise statics to 0 or NULL
#9060: FILE: drivers/net/sfc/falcon.c:109:
+static int disable_dma_stats = 0;
WARNING: line over 80 characters
#9087: FILE: drivers/net/sfc/falcon.c:136:
+/** Maximum number of internal errors. After this resets will not be performed */
WARNING: externs should be avoided in .c files
#9573: FILE: drivers/net/sfc/falcon.c:622:
+ extern int __unsupported_tx_descq_size;
WARNING: externs should be avoided in .c files
#9804: FILE: drivers/net/sfc/falcon.c:853:
+ extern int __unsupported_rx_descq_size;
WARNING: braces {} are not necessary for single statement blocks
#10183: FILE: drivers/net/sfc/falcon.c:1232:
+ if (rx_ev_other_err) {
+ EFX_INFO_RL("%s RX queue %d unexpected RX event "
+ EFX_QWORD_FMT "%s%s%s%s%s%s%s%s%s\n",
+ efx->name, rx_queue->queue,
+ EFX_QWORD_VAL(*event),
+ rx_ev_buf_owner_id_err ? " [OWNER_ID_ERR]" : "",
+ rx_ev_ip_hdr_chksum_err ?
+ " [IP_HDR_CHKSUM_ERR]" : "",
+ rx_ev_tcp_udp_chksum_err ?
+ " [TCP_UDP_CHKSUM_ERR]" : "",
+ rx_ev_eth_crc_err ? " [ETH_CRC_ERR]" : "",
+ rx_ev_frm_trunc ? " [FRM_TRUNC]" : "",
+ rx_ev_drib_nib ? " [DRIB_NIB]" : "",
+ rx_ev_tobe_disc ? " [TOBE_DISC]" : "",
+ rx_ev_pause_frm ? " [PAUSE]" : "",
+ snap ? " [SNAP/LLC]" : "");
+ }
WARNING: braces {} are not necessary for single statement blocks
#10202: FILE: drivers/net/sfc/falcon.c:1251:
+ if (rx_ev_eth_crc_err && efx->workarounds.bug10750) {
+ efx->bug10750_crcs++;
+ }
WARNING: externs should be avoided in .c files
#10619: FILE: drivers/net/sfc/falcon.c:1668:
+ extern int __unsupported_evq_size;
WARNING: do not add new typedefs
#10807: FILE: drivers/net/sfc/falcon.c:1856:
+typedef efx_oword_t falcon_int_ker_t;
WARNING: Use of volatile is usually wrong: see Documentation/volatile-considered-harmful.txt
#11561: FILE: drivers/net/sfc/falcon.c:2610:
+ if (*(volatile uint32_t *)dma_done == FALCON_STATS_DONE)
WARNING: line over 80 characters
#12113: FILE: drivers/net/sfc/falcon.c:3162:
+ EXT_PHY_RST_DUR, 0x7 /* datasheet recommended */ ,
WARNING: line over 80 characters
#12140: FILE: drivers/net/sfc/falcon.c:3189:
+ EFX_ERR("%s failed to restore PCI config "
WARNING: line over 80 characters
#12218: FILE: drivers/net/sfc/falcon.c:3267:
+ if (EFX_OWORD_FIELD(srm_cfg_reg_ker, SRAM_OOB_BT_INIT_EN) == 0) {
WARNING: kfree(NULL) is safe this check is probabally not required
#12267: FILE: drivers/net/sfc/falcon.c:3316:
+ if (*spi_device_ret)
+ kfree(*spi_device_ret);
WARNING: kfree(NULL) is safe this check is probabally not required
#12694: FILE: drivers/net/sfc/falcon.c:3743:
+ if (efx->spi_eeprom) {
+ kfree(efx->spi_eeprom);
WARNING: kfree(NULL) is safe this check is probabally not required
#12698: FILE: drivers/net/sfc/falcon.c:3747:
+ if (efx->spi_flash) {
+ kfree(efx->spi_flash);
ERROR: no space before that close parenthesis ')'
#12941: FILE: drivers/net/sfc/falcon.c:3990:
+ EFX_ASSERT(tlp_size <= 3 /* 3=1024 */);
WARNING: kfree(NULL) is safe this check is probabally not required
#13251: FILE: drivers/net/sfc/falcon.c:4300:
+ if (efx->nic_params) {
+ kfree(efx->nic_params);
WARNING: do not add new typedefs
#13491: FILE: drivers/net/sfc/falcon.h:153:
+typedef efx_qword_t falcon_event_t;
WARNING: do not add new typedefs
#13496: FILE: drivers/net/sfc/falcon.h:158:
+typedef efx_qword_t falcon_tx_desc_t;
WARNING: do not add new typedefs
#13499: FILE: drivers/net/sfc/falcon.h:161:
+typedef efx_qword_t falcon_rx_desc_t;
WARNING: line over 80 characters
#16265: FILE: drivers/net/sfc/falcon_xmac.c:402:
+ if (efx_port->efx->revision <= FALCON_REV_A1 && !efx_port->efx->is_asic) {
WARNING: line over 80 characters
#16326: FILE: drivers/net/sfc/falcon_xmac.c:463:
+ if (efx_port->efx->revision == FALCON_REV_B0 && !efx_port->efx->is_asic) {
WARNING: line over 80 characters
#18037: FILE: drivers/net/sfc/mdio_10g.c:133:
+ efx_port->mii.phy_id,
WARNING: line over 80 characters
#18038: FILE: drivers/net/sfc/mdio_10g.c:134:
+ mmd, MDIO_MMDREG_CTRL1);
WARNING: line over 80 characters
#18040: FILE: drivers/net/sfc/mdio_10g.c:136:
+ EFX_ERR("%s failed to read status of MMD %s\n",
WARNING: line over 80 characters
#18042: FILE: drivers/net/sfc/mdio_10g.c:138:
+ STRING_TABLE_LOOKUP(mmd, mmd_block));
WARNING: line over 80 characters
#18072: FILE: drivers/net/sfc/mdio_10g.c:168:
+ /* Historically we have probed the PHYXS to find out what devices are present,
WARNING: line over 80 characters
#18073: FILE: drivers/net/sfc/mdio_10g.c:169:
+ * but that doesn't work so well if the PHYXS isn't expectedt to exist, in
ERROR: no space before that close parenthesis ')'
#19301: FILE: drivers/net/sfc/mentormac.c:606:
+ GM_PAMBL_LEN, 0x7 /*datasheet recommended */);
ERROR: do not initialise statics to 0 or NULL
#19510: FILE: drivers/net/sfc/mtd.c:84:
+static unsigned int efx_allow_nvconfig_writes = 0;
WARNING: do not add new typedefs
#21296: FILE: drivers/net/sfc/net_driver.h:546:
+typedef enum {
WARNING: do not add new typedefs
#21305: FILE: drivers/net/sfc/net_driver.h:555:
+typedef enum {
WARNING: line over 80 characters
#21561: FILE: drivers/net/sfc/net_driver.h:811:
+ /** Flow control flags - RX/TX are separate so cannot use link_options */
WARNING: Use of volatile is usually wrong: see Documentation/volatile-considered-harmful.txt
#21756: FILE: drivers/net/sfc/net_driver.h:1006:
+ volatile signed int last_irq_cpu;
ERROR: Macros with multiple statements should be enclosed in a do - while loop
#21846: FILE: drivers/net/sfc/net_driver.h:1096:
+ for (_channel = &_efx->channel[0]; \
+ _channel < &_efx->channel[EFX_MAX_CHANNELS]; \
+ _channel++) \
ERROR: Macros with multiple statements should be enclosed in a do - while loop
#21854: FILE: drivers/net/sfc/net_driver.h:1104:
+ for (_channel = &_efx->channel[0]; \
+ _channel < &_efx->channel[EFX_MAX_CHANNELS]; \
+ _channel++) \
ERROR: Macros with multiple statements should be enclosed in a do - while loop
#21863: FILE: drivers/net/sfc/net_driver.h:1113:
+ for (_efx_port = &_efx->port[0]; \
+ _efx_port < &_efx->port[EFX_MAX_PORTS]; \
+ _efx_port++) \
ERROR: Macros with multiple statements should be enclosed in a do - while loop
#21871: FILE: drivers/net/sfc/net_driver.h:1121:
+ for (_tx_queue = &_efx->tx_queue[0]; \
+ _tx_queue < &_efx->tx_queue[EFX_MAX_TX_QUEUES]; \
+ _tx_queue++) \
ERROR: Macros with multiple statements should be enclosed in a do - while loop
#21879: FILE: drivers/net/sfc/net_driver.h:1129:
+ for (_tx_queue = &_channel->efx->tx_queue[0]; \
+ _tx_queue < &_channel->efx->tx_queue[EFX_MAX_TX_QUEUES]; \
+ _tx_queue++) \
ERROR: Macros with multiple statements should be enclosed in a do - while loop
#21888: FILE: drivers/net/sfc/net_driver.h:1138:
+ for (_tx_queue = &_efx_port->efx->tx_queue[0]; \
+ _tx_queue < &_efx_port->efx->tx_queue[EFX_MAX_TX_QUEUES]; \
+ _tx_queue++) \
ERROR: Macros with multiple statements should be enclosed in a do - while loop
#21897: FILE: drivers/net/sfc/net_driver.h:1147:
+ for (_rx_queue = &_efx->rx_queue[0]; \
+ _rx_queue < &_efx->rx_queue[EFX_MAX_RX_QUEUES]; \
+ _rx_queue++) \
ERROR: Macros with multiple statements should be enclosed in a do - while loop
#21905: FILE: drivers/net/sfc/net_driver.h:1155:
+ for (_rx_queue = &_channel->efx->rx_queue[0]; \
+ _rx_queue < &_channel->efx->rx_queue[EFX_MAX_RX_QUEUES]; \
+ _rx_queue++) \
ERROR: no space before that close parenthesis ')'
#21988: FILE: drivers/net/sfc/net_driver.h:1238:
+ ((((mtu) + ETH_HLEN + VLAN_HLEN + 4 /* FCS */) + 7) & ~7)
WARNING: line over 80 characters
#22175: FILE: drivers/net/sfc/pm8358_phy.c:59:
+#define PMC_ANALOG_RX_TERM (1 << 15) /* Bit 15 of RX CFG: 0 for 100 ohms float,
WARNING: braces {} are not necessary for single statement blocks
#22261: FILE: drivers/net/sfc/pm8358_phy.c:145:
+ if (rc < 0) {
+ return rc;
+ }
WARNING: labels should not be indented
#23022: FILE: drivers/net/sfc/rx.c:634:
+ out_unlock_free:
WARNING: labels should not be indented
#23024: FILE: drivers/net/sfc/rx.c:636:
+ out_free:
WARNING: line over 80 characters
#24375: FILE: drivers/net/sfc/selftest.c:743:
+ /* bug6926: Moving into/out of loopback could cut a packet in half.
WARNING: line over 80 characters
#24855: FILE: drivers/net/sfc/sfe4001.c:182:
+ tenxpress_phy_state(&efx->port[0], TENXPRESS_STATUS_OTEMP);
WARNING: line over 80 characters
#24859: FILE: drivers/net/sfc/sfe4001.c:186:
+ EFX_ERR("%s %s: Temperature sensor reports alarm!"
ERROR: trailing whitespace
#24881: FILE: drivers/net/sfc/sfe4001.c:208:
+ * $
WARNING: line over 80 characters
#25630: FILE: drivers/net/sfc/tenxpress.c:361:
+ reg = mdio_clause45_read(efx_port, efx_port->mii.phy_id, MDIO_MMD_PMAPMD,
WARNING: line over 80 characters
#25669: FILE: drivers/net/sfc/tenxpress.c:400:
+ reg = mdio_clause45_read(efx_port, efx_port->mii.phy_id, MDIO_MMD_PMAPMD,
WARNING: line over 80 characters
#25716: FILE: drivers/net/sfc/tenxpress.c:447:
+ * distinguish between not being plugged in and being plugged into
WARNING: line over 80 characters
#25717: FILE: drivers/net/sfc/tenxpress.c:448:
+ * a non-AN antique. The FLP bit has the advantage of not clearing
WARNING: line over 80 characters
#25726: FILE: drivers/net/sfc/tenxpress.c:457:
+ MDIO_AN_10GBT_STATUS);
WARNING: line over 80 characters
#25728: FILE: drivers/net/sfc/tenxpress.c:459:
+ (1 << MDIO_AN_10GBT_STATUS_LP_10G_LBN));
WARNING: line over 80 characters
#25828: FILE: drivers/net/sfc/tenxpress.c:559:
+ /* Waiting here ensures that the board fini, which can turn off the power
WARNING: line over 80 characters
#26889: FILE: drivers/net/sfc/txc43128_phy.c:257:
+ /* Set PMA to test into loopback using Mt. Diablo reg. as per app note */
WARNING: braces {} are not necessary for single statement blocks
#26916: FILE: drivers/net/sfc/txc43128_phy.c:284:
+ while (bctl & (1 << TXC_BIST_CTRL_STOP_LBN)) {
+ bctl = mdio_clause45_read(port, phy, mmd, TXC_BIST_CTL);
+ }
WARNING: line over 80 characters
#26926: FILE: drivers/net/sfc/txc43128_phy.c:294:
+ EFX_ERR("%s "TXCNAME": BIST error. Lane %d had %d errors\n",
WARNING: line over 80 characters
#26933: FILE: drivers/net/sfc/txc43128_phy.c:301:
+ EFX_ERR("%s "TXCNAME": BIST error. Lane %d got 0 frames\n",
WARNING: do not add new typedefs
#27439: FILE: drivers/net/sfc/workarounds.h:43:
+typedef struct {
WARNING: line over 80 characters
#27446: FILE: drivers/net/sfc/workarounds.h:50:
+ unsigned int bug6926:1; /* Packets stuck in TX moving between loopback modes */
WARNING: line over 80 characters
#27458: FILE: drivers/net/sfc/workarounds.h:62:
+ unsigned int bug8908:1; /* Moving into/out of loopback may cause a packet
WARNING: line over 80 characters
#27459: FILE: drivers/net/sfc/workarounds.h:63:
+ * to be dropped (caused by the fix for bug 6926) */
WARNING: line over 80 characters
#27460: FILE: drivers/net/sfc/workarounds.h:64:
+ unsigned int bug9096:1; /* Falcon doesn't flush queued ACKs before entering L1 */
WARNING: line over 80 characters
#27461: FILE: drivers/net/sfc/workarounds.h:65:
+ unsigned int bug9141:1; /* TX packet parser problem with <= 16 byte TXes */
WARNING: line over 80 characters
#27463: FILE: drivers/net/sfc/workarounds.h:67:
+ unsigned int bug10750:1;/* Constant low rate CRC errors require XAUI reset */
WARNING: line over 80 characters
#27464: FILE: drivers/net/sfc/workarounds.h:68:
+ unsigned int bug10789:1;/* SFE4001: 10XPress resets 312.5MHz PLL reset */
WARNING: line over 80 characters
#27467: FILE: drivers/net/sfc/workarounds.h:71:
+ unsigned int bug8202:1; /* FPGA/B0 memories need clearing at start-of-day */
WARNING: line over 80 characters
#27470: FILE: drivers/net/sfc/workarounds.h:74:
+ * erroneously on busy systems. Recent builds OK */
ERROR: need space after that ',' (ctx:VxV)
#27474: FILE: drivers/net/sfc/workarounds.h:78:
+#define FALCON_A1_WORKAROUNDS 1,1,1,1,1,1,1,1,1,1
^
ERROR: need space after that ',' (ctx:VxV)
#27474: FILE: drivers/net/sfc/workarounds.h:78:
+#define FALCON_A1_WORKAROUNDS 1,1,1,1,1,1,1,1,1,1
^
ERROR: need space after that ',' (ctx:VxV)
#27474: FILE: drivers/net/sfc/workarounds.h:78:
+#define FALCON_A1_WORKAROUNDS 1,1,1,1,1,1,1,1,1,1
^
ERROR: need space after that ',' (ctx:VxV)
#27474: FILE: drivers/net/sfc/workarounds.h:78:
+#define FALCON_A1_WORKAROUNDS 1,1,1,1,1,1,1,1,1,1
^
ERROR: need space after that ',' (ctx:VxV)
#27474: FILE: drivers/net/sfc/workarounds.h:78:
+#define FALCON_A1_WORKAROUNDS 1,1,1,1,1,1,1,1,1,1
^
ERROR: need space after that ',' (ctx:VxV)
#27474: FILE: drivers/net/sfc/workarounds.h:78:
+#define FALCON_A1_WORKAROUNDS 1,1,1,1,1,1,1,1,1,1
^
ERROR: need space after that ',' (ctx:VxV)
#27474: FILE: drivers/net/sfc/workarounds.h:78:
+#define FALCON_A1_WORKAROUNDS 1,1,1,1,1,1,1,1,1,1
^
ERROR: need space after that ',' (ctx:VxV)
#27474: FILE: drivers/net/sfc/workarounds.h:78:
+#define FALCON_A1_WORKAROUNDS 1,1,1,1,1,1,1,1,1,1
^
ERROR: need space after that ',' (ctx:VxV)
#27474: FILE: drivers/net/sfc/workarounds.h:78:
+#define FALCON_A1_WORKAROUNDS 1,1,1,1,1,1,1,1,1,1
^
ERROR: need space after that ',' (ctx:VxV)
#27475: FILE: drivers/net/sfc/workarounds.h:79:
+#define NO_FALCON_A1_WORKAROUNDS 0,0,0,0,0,0,0,0,0,0
^
ERROR: need space after that ',' (ctx:VxV)
#27475: FILE: drivers/net/sfc/workarounds.h:79:
+#define NO_FALCON_A1_WORKAROUNDS 0,0,0,0,0,0,0,0,0,0
^
ERROR: need space after that ',' (ctx:VxV)
#27475: FILE: drivers/net/sfc/workarounds.h:79:
+#define NO_FALCON_A1_WORKAROUNDS 0,0,0,0,0,0,0,0,0,0
^
ERROR: need space after that ',' (ctx:VxV)
#27475: FILE: drivers/net/sfc/workarounds.h:79:
+#define NO_FALCON_A1_WORKAROUNDS 0,0,0,0,0,0,0,0,0,0
^
ERROR: need space after that ',' (ctx:VxV)
#27475: FILE: drivers/net/sfc/workarounds.h:79:
+#define NO_FALCON_A1_WORKAROUNDS 0,0,0,0,0,0,0,0,0,0
^
ERROR: need space after that ',' (ctx:VxV)
#27475: FILE: drivers/net/sfc/workarounds.h:79:
+#define NO_FALCON_A1_WORKAROUNDS 0,0,0,0,0,0,0,0,0,0
^
ERROR: need space after that ',' (ctx:VxV)
#27475: FILE: drivers/net/sfc/workarounds.h:79:
+#define NO_FALCON_A1_WORKAROUNDS 0,0,0,0,0,0,0,0,0,0
^
ERROR: need space after that ',' (ctx:VxV)
#27475: FILE: drivers/net/sfc/workarounds.h:79:
+#define NO_FALCON_A1_WORKAROUNDS 0,0,0,0,0,0,0,0,0,0
^
ERROR: need space after that ',' (ctx:VxV)
#27475: FILE: drivers/net/sfc/workarounds.h:79:
+#define NO_FALCON_A1_WORKAROUNDS 0,0,0,0,0,0,0,0,0,0
^
ERROR: need space after that ',' (ctx:VxV)
#27477: FILE: drivers/net/sfc/workarounds.h:81:
+#define FALCON_B0_WORKAROUNDS 1,1,1,1,1,1,1,1,1,1,1
^
ERROR: need space after that ',' (ctx:VxV)
#27477: FILE: drivers/net/sfc/workarounds.h:81:
+#define FALCON_B0_WORKAROUNDS 1,1,1,1,1,1,1,1,1,1,1
^
ERROR: need space after that ',' (ctx:VxV)
#27477: FILE: drivers/net/sfc/workarounds.h:81:
+#define FALCON_B0_WORKAROUNDS 1,1,1,1,1,1,1,1,1,1,1
^
ERROR: need space after that ',' (ctx:VxV)
#27477: FILE: drivers/net/sfc/workarounds.h:81:
+#define FALCON_B0_WORKAROUNDS 1,1,1,1,1,1,1,1,1,1,1
^
ERROR: need space after that ',' (ctx:VxV)
#27477: FILE: drivers/net/sfc/workarounds.h:81:
+#define FALCON_B0_WORKAROUNDS 1,1,1,1,1,1,1,1,1,1,1
^
ERROR: need space after that ',' (ctx:VxV)
#27477: FILE: drivers/net/sfc/workarounds.h:81:
+#define FALCON_B0_WORKAROUNDS 1,1,1,1,1,1,1,1,1,1,1
^
ERROR: need space after that ',' (ctx:VxV)
#27477: FILE: drivers/net/sfc/workarounds.h:81:
+#define FALCON_B0_WORKAROUNDS 1,1,1,1,1,1,1,1,1,1,1
^
ERROR: need space after that ',' (ctx:VxV)
#27477: FILE: drivers/net/sfc/workarounds.h:81:
+#define FALCON_B0_WORKAROUNDS 1,1,1,1,1,1,1,1,1,1,1
^
ERROR: need space after that ',' (ctx:VxV)
#27477: FILE: drivers/net/sfc/workarounds.h:81:
+#define FALCON_B0_WORKAROUNDS 1,1,1,1,1,1,1,1,1,1,1
^
ERROR: need space after that ',' (ctx:VxV)
#27477: FILE: drivers/net/sfc/workarounds.h:81:
+#define FALCON_B0_WORKAROUNDS 1,1,1,1,1,1,1,1,1,1,1
^
ERROR: need space after that ',' (ctx:VxV)
#27478: FILE: drivers/net/sfc/workarounds.h:82:
+#define NO_FALCON_B0_WORKAROUNDS 0,0,0,0,0,0,0,0,0,0,0
^
ERROR: need space after that ',' (ctx:VxV)
#27478: FILE: drivers/net/sfc/workarounds.h:82:
+#define NO_FALCON_B0_WORKAROUNDS 0,0,0,0,0,0,0,0,0,0,0
^
ERROR: need space after that ',' (ctx:VxV)
#27478: FILE: drivers/net/sfc/workarounds.h:82:
+#define NO_FALCON_B0_WORKAROUNDS 0,0,0,0,0,0,0,0,0,0,0
^
ERROR: need space after that ',' (ctx:VxV)
#27478: FILE: drivers/net/sfc/workarounds.h:82:
+#define NO_FALCON_B0_WORKAROUNDS 0,0,0,0,0,0,0,0,0,0,0
^
ERROR: need space after that ',' (ctx:VxV)
#27478: FILE: drivers/net/sfc/workarounds.h:82:
+#define NO_FALCON_B0_WORKAROUNDS 0,0,0,0,0,0,0,0,0,0,0
^
ERROR: need space after that ',' (ctx:VxV)
#27478: FILE: drivers/net/sfc/workarounds.h:82:
+#define NO_FALCON_B0_WORKAROUNDS 0,0,0,0,0,0,0,0,0,0,0
^
ERROR: need space after that ',' (ctx:VxV)
#27478: FILE: drivers/net/sfc/workarounds.h:82:
+#define NO_FALCON_B0_WORKAROUNDS 0,0,0,0,0,0,0,0,0,0,0
^
ERROR: need space after that ',' (ctx:VxV)
#27478: FILE: drivers/net/sfc/workarounds.h:82:
+#define NO_FALCON_B0_WORKAROUNDS 0,0,0,0,0,0,0,0,0,0,0
^
ERROR: need space after that ',' (ctx:VxV)
#27478: FILE: drivers/net/sfc/workarounds.h:82:
+#define NO_FALCON_B0_WORKAROUNDS 0,0,0,0,0,0,0,0,0,0,0
^
ERROR: need space after that ',' (ctx:VxV)
#27478: FILE: drivers/net/sfc/workarounds.h:82:
+#define NO_FALCON_B0_WORKAROUNDS 0,0,0,0,0,0,0,0,0,0,0
^
ERROR: need space after that ',' (ctx:VxV)
#27480: FILE: drivers/net/sfc/workarounds.h:84:
+#define FALCON_B0_FPGA_WORKAROUNDS 1,1,1
^
ERROR: need space after that ',' (ctx:VxV)
#27480: FILE: drivers/net/sfc/workarounds.h:84:
+#define FALCON_B0_FPGA_WORKAROUNDS 1,1,1
^
ERROR: need space after that ',' (ctx:VxV)
#27481: FILE: drivers/net/sfc/workarounds.h:85:
+#define NO_FALCON_B0_FPGA_WORKAROUNDS 0,0,0
^
ERROR: need space after that ',' (ctx:VxV)
#27481: FILE: drivers/net/sfc/workarounds.h:85:
+#define NO_FALCON_B0_FPGA_WORKAROUNDS 0,0,0
^
total: 70 errors, 81 warnings, 27650 lines checked
Your patch has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
--
Stephen Hemminger <shemminger@...ux-foundation.org>
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists