lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20080220013824.GA5416@localdomain>
Date:	Tue, 19 Feb 2008 17:38:24 -0800
From:	"Matt Carlson" <mcarlson@...adcom.com>
To:	"Tony Battersby" <tonyb@...ernetics.com>
cc:	"Michael Chan" <mchan@...adcom.com>,
	"David Miller" <davem@...emloft.net>, herbert@...dor.apana.org.au,
	netdev <netdev@...r.kernel.org>, gregkh@...e.de,
	linux-kernel@...r.kernel.org
Subject: Re: TG3 network data corruption regression 2.6.24/2.6.23.4

On Tue, Feb 19, 2008 at 05:14:26PM -0500, Tony Battersby wrote:
> Michael Chan wrote:
> > On Tue, 2008-02-19 at 11:16 -0500, Tony Battersby wrote:
> >   
> >> iSCSI
> >> performance drops to 6 - 15 MB/s when the 3Com NIC is doing heavy rx
> >> with light tx,
> >>     
> >
> > That's strange.  The patch should only affect TX performance slightly
> > since we are just turning off SG for TX.  Please take an ethereal trace
> > to see what's happening and compare with a good trace.
> >
> >   
> 
> Update: when I revert Herbert's patch in addition to applying your
> patch, the iSCSI performance goes back up to 115 MB/s again in both
> directions.  So it looks like turning off SG for TX didn't itself cause
> the performance drop, but rather that the performance drop is just
> another manifestation of whatever bug is causing the data corruption.
> 
> I do not regularly use wireshark or look at network packet dumps, so I
> am not really sure what to look for.  Given the above information, do
> you still believe that there is value in examining the packet dump?
> 
> Tony

Hi Tony.  Can you give us the output of :

sudo lspci -vvv -xxxx -s 03:01.0'

(assuming that is still the correct address of the 3Com NIC.)

Also, after some digging, I found that the 5701 can run into trouble if
a 64-bit DMA read terminates early and then completes as a 32-bit transfer.
The problem is reportedly very rare, but the failure mode looks like a
match.  Can you apply the following patch and see if it helps your
performance / corruption problems?


diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index db606b6..7ad08ce 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -11409,6 +11409,8 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 		tp->tg3_flags |= TG3_FLAG_PCI_HIGH_SPEED;
 	if ((pci_state_reg & PCISTATE_BUS_32BIT) != 0)
 		tp->tg3_flags |= TG3_FLAG_PCI_32BIT;
+	else if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701)
+		tp->grc_mode |= GRC_MODE_FORCE_PCI32BIT;
 
 	/* Chip-specific fixup from Broadcom driver */
 	if ((tp->pci_chip_rev_id == CHIPREV_ID_5704_A0) &&


--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ