[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1209051431.7339.35.camel@wendyx.austin.ibm.com>
Date: Thu, 24 Apr 2008 10:37:11 -0500
From: wendy xiong <wendyx@...ibm.com>
To: Michael Chan <mchan@...adcom.com>
Cc: netdev <netdev@...r.kernel.org>, jeff@...zik.org,
David Miller <davem@...emloft.net>
Subject: Re: [ PATCH 1/1 2.6.25-rc9] bnx2: Add EEH support in bnx2 driver -
Resending
Hi Michael,
Thanks!
Wendy
diff -Nuarp linux-2.6.25-rc9.orig/drivers/net/bnx2.c linux-2.6.25-rc9.eeh/drivers/net/bnx2.c
--- linux-2.6.25-rc9.orig/drivers/net/bnx2.c 2008-04-18 22:12:53.000000000 -0500
+++ linux-2.6.25-rc9.eeh/drivers/net/bnx2.c 2008-04-24 10:30:58.000000000 -0500
@@ -7108,6 +7108,7 @@ bnx2_init_board(struct pci_dev *pdev, st
}
pci_set_master(pdev);
+ pci_save_state(pdev);
bp->pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM);
if (bp->pm_cap == 0) {
@@ -7617,6 +7618,92 @@ bnx2_resume(struct pci_dev *pdev)
return 0;
}
+/**
+ * bnx2_io_error_detected - called when PCI error is detected
+ * @pdev: Pointer to PCI device
+ * @state: The current pci connection state
+ *
+ * This function is called after a PCI bus error affecting
+ * this device has been detected.
+ */
+static pci_ers_result_t bnx2_io_error_detected(struct pci_dev *pdev,
+ pci_channel_state_t state)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ struct bnx2 *bp = netdev_priv(dev);
+
+ rtnl_lock();
+ netif_device_detach(dev);
+
+ if (netif_running(dev)) {
+ bnx2_netif_stop(bp);
+ del_timer_sync(&bp->timer);
+ bnx2_reset_nic(bp, BNX2_DRV_MSG_CODE_RESET);
+ }
+
+ pci_disable_device(pdev);
+ rtnl_unlock();
+
+ /* Request a slot slot reset. */
+ return PCI_ERS_RESULT_NEED_RESET;
+}
+
+/**
+ * bnx2_io_slot_reset - called after the pci bus has been reset.
+ * @pdev: Pointer to PCI device
+ *
+ * Restart the card from scratch, as if from a cold-boot.
+ */
+static pci_ers_result_t bnx2_io_slot_reset(struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ struct bnx2 *bp = netdev_priv(dev);
+
+ rtnl_lock();
+ if (pci_enable_device(pdev)) {
+ dev_err(&pdev->dev,
+ "Cannot re-enable PCI device after reset.\n");
+ rtnl_unlock();
+ return PCI_ERS_RESULT_DISCONNECT;
+ }
+ pci_set_master(pdev);
+ pci_restore_state(pdev);
+
+ if (netif_running(dev)) {
+ bnx2_set_power_state(bp, PCI_D0);
+ bnx2_init_nic(bp);
+ }
+
+ rtnl_unlock();
+ return PCI_ERS_RESULT_RECOVERED;
+}
+
+/**
+ * bnx2_io_resume - called when traffic can start flowing again.
+ * @pdev: Pointer to PCI device
+ *
+ * This callback is called when the error recovery driver tells us that
+ * its OK to resume normal operation.
+ */
+static void bnx2_io_resume(struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ struct bnx2 *bp = netdev_priv(dev);
+
+ rtnl_lock();
+ if (netif_running(dev))
+ bnx2_netif_start(bp);
+
+ netif_device_attach(dev);
+ rtnl_unlock();
+}
+
+static struct pci_error_handlers bnx2_err_handler = {
+ .error_detected = bnx2_io_error_detected,
+ .slot_reset = bnx2_io_slot_reset,
+ .resume = bnx2_io_resume,
+};
+
static struct pci_driver bnx2_pci_driver = {
.name = DRV_MODULE_NAME,
.id_table = bnx2_pci_tbl,
@@ -7624,6 +7711,7 @@ static struct pci_driver bnx2_pci_driver
.remove = __devexit_p(bnx2_remove_one),
.suspend = bnx2_suspend,
.resume = bnx2_resume,
+ .err_handler = &bnx2_err_handler,
};
static int __init bnx2_init(void)
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists