netdev - Re: [linux-pm] [PATCH 0/4] Fix forcedeth hibernate/wake-on-lan problems

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <Pine.LNX.4.44L0.0806031603410.3524-100000@iolanthe.rowland.org>
Date:	Tue, 3 Jun 2008 16:06:10 -0400 (EDT)
From:	Alan Stern <stern@...land.harvard.edu>
To:	Tobias Diedrich <ranma+kernel@...edrich.de>
cc:	netdev@...r.kernel.org, <linux-kernel@...r.kernel.org>,
	Ayaz Abdulla <aabdulla@...dia.com>,
	"Rafael J. Wysocki" <rjw@...k.pl>,
	Stephen Hemminger <shemminger@...ux-foundation.org>,
	David Brownell <david-b@...bell.net>,
	<linux-acpi@...r.kernel.org>, <linux-pm@...ts.linux-foundation.org>
Subject: Re: [linux-pm] [PATCH 0/4] Fix forcedeth hibernate/wake-on-lan
 problems

On Tue, 3 Jun 2008, Tobias Diedrich wrote:

> > So for some reason your EHCI controller thinks a wakeup event is 
> > pending.  This means you should examine the contents of the "registers" 
> > file in the debugfs directory for the EHCI controller, not OHCI.
> 
> melchior:/mnt/ehci/0000:00:02.1# cat registers
> bus pci, device 0000:00:02.1 (driver 10 Dec 2004)
> EHCI Host Controller
> EHCI 1.00, hcd state 1
> ownership 00000001
> SMI sts/enable 0xc0080000
> structural params 0x00101a8a
> capability params 0x0000a086
> status 0008 FLR
> command 010009 (park)=0 ithresh=1 period=256 RUN
> intrenable 37 IAA FATAL PCD ERR INT
> uframe 3f3a
> port 1 status 003400 POWER OWNER sig=k
> port 2 status 001000 POWER sig=se0
> port 3 status 003400 POWER OWNER sig=k
> port 4 status 003400 POWER OWNER sig=k
> port 5 status 001000 POWER sig=se0
> port 6 status 001000 POWER sig=se0
> port 7 status 001000 POWER sig=se0
> port 8 status 001000 POWER sig=se0
> port 9 status 001000 POWER sig=se0
> port 10 status 001000 POWER sig=se0
> irq normal 0 err 0 reclaim 0 (lost 0)
> complete 0 unlink 0

Got to admit, I'm stumped.  There's nothing in the state description to 
indicate why the controller should want to signal a wakeup event.

As an experiment, you could try disabling wakeup on the EHCI controller 
alone, leaving it enabled on the OHCI controller.  Since the keyboard 
-- and in fact all your USB devices -- is attached to the OHCI 
controller, it should do what you want.

Alan Stern

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html