[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20080615213240.M2725@visp.net.lb>
Date: Mon, 16 Jun 2008 00:32:57 +0300
From: "Denys Fedoryshchenko" <denys@...p.net.lb>
To: Francois Romieu <romieu@...zoreil.com>
Cc: netdev@...r.kernel.org
Subject: Re: NAPI, rx_no_buffer_count, e1000, r8169 and other actors
Very sorry, forgot dmesg
[ 3.070955] r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
[ 3.070972] ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 21 (level, low) ->
IRQ 21
[ 3.071582] eth0: RTL8110s at 0xf8894000, 00:18:f8:0b:46:a6, XID 04000000
IRQ 21
On Sun, 15 Jun 2008 22:57:10 +0200, Francois Romieu wrote
> Denys Fedoryshchenko <denys@...p.net.lb> :
> [...]
> > Third host r8169 (PCI! This is important, seems i am running out of PCI
> > capacity), 400Mbit/s rx+tx summary load, e1000e interface also - around
>
> 400 rx + 400 tx or 200 rx + 200 tx ?
> Can you specify the packet rate and the cpu ?
>
> > 200Mbps load. What is worrying me - interrupts rate, it seems generated by
> > realtek card... is there any way to drop it down?
> >
> > Also some packetloss, around 0.0005% (i prefer to have clear zero :-)) ). No
> > nat, no shapers, same kernel configuration.
>
> Can you send an ethtool -S (+ ifconfig) of the 8169 if it misses
> packets as well as the lines of dmesg which relate to the r8169
> driver ?
>
> --
> Ueimor
> --
> To unsubscribe from this list: send the line "unsubscribe netdev" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Denys Fedoryshchenko
Technical Manager
Virtual ISP S.A.L.
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists