| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1215194516.3189.5.camel@shinybook.infradead.org>
Date: Fri, 04 Jul 2008 19:01:56 +0100
From: David Woodhouse <dwmw2@...radead.org>
To: Theodore Tso <tytso@....edu>
Cc: Jeff Garzik <jeff@...zik.org>, Andi Kleen <andi@...stfloor.org>,
David Miller <davem@...emloft.net>, hugh@...itas.com,
akpm@...ux-foundation.org, kosaki.motohiro@...fujitsu.com,
mchan@...adcom.com, linux-kernel@...r.kernel.org,
linux-mm@...ck.org, netdev@...r.kernel.org, sam@...nborg.org
Subject: Re: [bug?] tg3: Failed to load firmware "tigon/tg3_tso.bin"
On Fri, 2008-07-04 at 10:30 -0400, Theodore Tso wrote:
> So on this point I'd side with David, and say that folding "make
> firmware_install" into "make modules_install" goes a long way towards
> healing this particular breakage.
make modules_install | tail ...
INSTALL fs/nfs/nfs.ko
INSTALL fs/nls/nls_iso8859-1.ko
INSTALL fs/vfat/vfat.ko
MKDIR /lib/firmware/acenic
INSTALL /lib/firmware/acenic/tg2.bin
MKDIR /lib/firmware/tigon
INSTALL /lib/firmware/tigon/tg3.bin
INSTALL /lib/firmware/tigon/tg3_tso.bin
INSTALL /lib/firmware/tigon/tg3_tso5.bin
DEPMOD 2.6.26-rc8
>>From 9fcda0ce34142cb8d7450dd262173a1c7c629515 Mon Sep 17 00:00:00 2001
From: David Woodhouse <dwmw2@...radead.org>
Date: Fri, 4 Jul 2008 18:53:27 +0100
Subject: [PATCH] firmware: 'make modules_install' installs firmware to match modules
(and also the static kernel, when CONFIG_FIRMWARE_IN_KERNEL=n).
This means that people no longer have to know to run 'make
firmware_install' for themselves, and firmware should get installed
automatically.
Signed-off-by: David Woodhouse <dwmw2@...radead.org>
---
Makefile | 6 ++++--
firmware/Makefile | 39 +++++++++++++++++++++++++++++----------
scripts/Makefile.fwinst | 21 ++++++++++++++++++---
3 files changed, 51 insertions(+), 15 deletions(-)
diff --git a/Makefile b/Makefile
index 947a90f..676fa96 100644
--- a/Makefile
+++ b/Makefile
@@ -996,11 +996,12 @@ depend dep:
# ---------------------------------------------------------------------------
# Firmware install
-INSTALL_FW_PATH=/lib/firmware
+INSTALL_FW_PATH=$(INSTALL_MOD_PATH)/lib/firmware
export INSTALL_FW_PATH
PHONY += firmware_install
firmware_install: FORCE
+ @mkdir -p $(objtree)/firmware
$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_install
# ---------------------------------------------------------------------------
@@ -1089,6 +1090,7 @@ _modinst_:
# boot script depmod is the master version.
PHONY += _modinst_post
_modinst_post: _modinst_
+ $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_modinst
$(call cmd,depmod)
else # CONFIG_MODULES
@@ -1207,7 +1209,7 @@ help:
@echo '* modules - Build all modules'
@echo ' modules_install - Install all modules to INSTALL_MOD_PATH (default: /)'
@echo ' firmware_install- Install all firmware to INSTALL_FW_PATH'
- @echo ' (default: /lib/firmware)'
+ @echo ' (default: $$(INSTALL_MOD_PATH)/lib/firmware)'
@echo ' dir/ - Build all files in dir and below'
@echo ' dir/file.[ois] - Build specified target only'
@echo ' dir/file.ko - Build module including final link'
diff --git a/firmware/Makefile b/firmware/Makefile
index f88d746..da9c92b 100644
--- a/firmware/Makefile
+++ b/firmware/Makefile
@@ -9,10 +9,24 @@ fwabs := $(addprefix $(srctree)/,$(filter-out /%,$(fwdir)))$(filter /%,$(fwdir))
fw-external-y := $(subst ",,$(CONFIG_EXTRA_FIRMWARE))
-ifneq ($(CONFIG_ACENIC_OMIT_TIGON_I),y)
-fw-shipped-$(CONFIG_ACENIC) += acenic/tg1.bin
+# There are three cases to care about:
+# 1. Building kernel with CONFIG_FIRMWARE_IN_KERNEL=y -- $(fw-shipped-y) should
+# include the firmware files to include, according to .config
+# 2. 'make modules_install', which will install firmware for modules, and
+# _also_ for the in-kernel drivers when CONFIG_FIRMWARE_IN_KERNEL=n
+# 3. 'make firmware_install', which installs all firmware, unconditionally.
+
+# For the former two cases we want $(fw-shipped-y) and $(fw-shipped-m) to be
+# accurate. In the latter case it doesn't matter -- it'll use $(fw-shipped-all).
+# But be aware that the config file might not be included at all.
+
+ifdef CONFIG_ACENIC_OMIT_TIGON_I
+acenic-objs := acenic/tg2.bin
+fw-shipped- += acenic/tg1.bin
+else
+acenic-objs := acenic/tg1.bin acenic/tg2.bin
endif
-fw-shipped-$(CONFIG_ACENIC) += acenic/tg2.bin
+fw-shipped-$(CONFIG_ACENIC) += $(acenic-objs)
fw-shipped-$(CONFIG_ATM_AMBASSADOR) += atmsar11.fw
fw-shipped-$(CONFIG_COMPUTONE) += intelliport2.bin
fw-shipped-$(CONFIG_DVB_AV7110) += av7110/bootcode.bin
@@ -35,6 +49,7 @@ fw-shipped-$(CONFIG_USB_EMI62) += emi62/loader.fw emi62/bitstream.fw \
fw-shipped-$(CONFIG_USB_KAWETH) += kaweth/new_code.bin kaweth/trigger_code.bin \
kaweth/new_code_fix.bin \
kaweth/trigger_code_fix.bin
+ifdef CONFIG_FIRMWARE_IN_KERNEL
fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_MPR) += keyspan/mpr.fw
fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA18X) += keyspan/usa18x.fw
fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19) += keyspan/usa19.fw
@@ -47,6 +62,12 @@ fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28XB) += keyspan/usa28xb.fw
fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28X) += keyspan/usa28x.fw
fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA49W) += keyspan/usa49w.fw
fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA49WLC) += keyspan/usa49wlc.fw
+else
+fw-shipped- := keyspan/mpr.fw keyspan/usa18x.fw keyspan/usa19.fw \
+ keyspan/usa19qi.fw keyspan/usa19qw.fw keyspan/usa19w.fw \
+ keyspan/usa28.fw keyspan/usa28xa.fw keyspan/usa28xb.fw \
+ keyspan/usa28x.fw keyspan/usa49w.fw keyspan/usa49wlc.fw
+endif
fw-shipped-$(CONFIG_USB_SERIAL_TI) += ti_3410.fw ti_5052.fw
fw-shipped-$(CONFIG_USB_SERIAL_WHITEHEAT) += whiteheat_loader.fw whiteheat.fw \
# whiteheat_loader_debug.fw
@@ -55,13 +76,10 @@ fw-shipped-$(CONFIG_USB_SERIAL_XIRCOM) += keyspan_pda/xircom_pgs.fw
fw-shipped-$(CONFIG_USB_VICAM) += vicam/firmware.fw
fw-shipped-$(CONFIG_VIDEO_CPIA2) += cpia2/stv0672_vp4.bin
-# If CONFIG_FIRMWARE_IN_KERNEL is not set, then don't include any firmware
-ifneq ($(CONFIG_FIRMWARE_IN_KERNEL),y)
-fw-shipped-y :=
-endif
+fw-shipped-all := $(fw-shipped-y) $(fw-shipped-m) $(fw-shipped-)
-firmware-y := $(fw-external-y) $(fw-shipped-y)
-firmware-dirs := $(sort $(patsubst %,$(objtree)/$(obj)/%/,$(dir $(firmware-y) $(fw-shipped-))))
+# Directories which we _might_ need to create, so we have a rule for them.
+firmware-dirs := $(sort $(patsubst %,$(objtree)/$(obj)/%/,$(dir $(fw-external-y) $(fw-shipped-all))))
quiet_cmd_mkdir = MKDIR $(patsubst $(objtree)/%,%,$@)
cmd_mkdir = mkdir -p $@
@@ -146,7 +164,8 @@ $(obj)/%.fw: $(obj)/%.H16 $(obj)/ihex2fw | $(objtree)/$(obj)/$$(dir %)
$(firmware-dirs):
$(call cmd,mkdir)
-obj-y := $(patsubst %,%.gen.o, $(firmware-y))
+obj-y += $(patsubst %,%.gen.o, $(fw-external-y))
+obj-$(CONFIG_FIRMWARE_IN_KERNEL) += $(patsubst %,%.gen.o, $(fw-shipped-y))
# Remove .S files and binaries created from ihex
# (during 'make clean' .config isn't included so they're all in $(fw-shipped-))
diff --git a/scripts/Makefile.fwinst b/scripts/Makefile.fwinst
index 8301802..df91610 100644
--- a/scripts/Makefile.fwinst
+++ b/scripts/Makefile.fwinst
@@ -8,13 +8,25 @@
INSTALL := install
src := $(obj)
+# For modules_install installing firmware, we want to see .config
+# But for firmware_install, we don't care, but don't want to require it.
+-include $(objtree)/.config
+
include scripts/Kbuild.include
include $(srctree)/$(obj)/Makefile
include scripts/Makefile.host
-installed-fw := $(addprefix $(INSTALL_FW_PATH)/,$(fw-shipped-))
-installed-fw-dirs := $(sort $(dir $(installed-fw)))
+mod-fw := $(addprefix $(INSTALL_FW_PATH)/,$(fw-shipped-m))
+
+# If CONFIG_FIRMWARE_IN_KERNEL isn't set, then install the
+# firmware for in-kernel drivers too.
+ifndef CONFIG_FIRMWARE_IN_KERNEL
+mod-fw += $(addprefix $(INSTALL_FW_PATH)/,$(fw-shipped-y))
+endif
+
+installed-fw := $(addprefix $(INSTALL_FW_PATH)/,$(fw-shipped-all))
+installed-fw-dirs := $(sort $(dir $(installed-fw))) $(INSTALL_FW_PATH)/.
quiet_cmd_install = INSTALL $(subst $(srctree)/,,$@)
cmd_install = $(INSTALL) -m0644 $< $@
@@ -25,7 +37,10 @@ $(installed-fw-dirs):
$(installed-fw): $(INSTALL_FW_PATH)/%: $(obj)/% | $(INSTALL_FW_PATH)/$$(dir %)/
$(call cmd,install)
-.PHONY: __fw_install FORCE
+.PHONY: __fw_install __fw_modinst FORCE
+
__fw_install: $(installed-fw)
+__fw_modinst: $(mod-fw)
+
FORCE:
--
1.5.5.1
--
dwmw2
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists