[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <200808101930.29574.rjw@sisk.pl>
Date: Sun, 10 Aug 2008 19:30:28 +0200
From: "Rafael J. Wysocki" <rjw@...k.pl>
To: Stephen Hemminger <stephen.hemminger@...tta.com>
Cc: netdev@...r.kernel.org, Jeff Garzik <jeff@...zik.org>,
Stephen Hemminger <shemminger@...tta.com>,
Andrew Morton <akpm@...ux-foundation.org>,
LKML <linux-kernel@...r.kernel.org>
Subject: [PATCH] sky2: Fix suspend/hibernation/shutdown regression with WOL enabled (rev. 2)
On Sunday, 10 of August 2008, Rafael J. Wysocki wrote:
> On Sunday, 10 of August 2008, Stephen Hemminger wrote:
> > On Sat, 9 Aug 2008 23:32:28 +0200
> > "Rafael J. Wysocki" <rjw@...k.pl> wrote:
> >
[--snip--]
> >
> > The problem is not unique to your chip version,
>
> Well, that's the part I wasn't sure of.
>
> > so patching out the power down is not the correct solution.
>
> Sure.
But, shouldn't we switch to page 2 before selecting PHY_MARV_PHY_CTRL? Things
work correctly if this is done (patch below).
Thanks,
Rafael
---
On my test box with the Asus M3A32-MVP main board there is a
regression from 2.6.26 related to suspend, hibernation and
shutdown. Namely, if Wake-on-LAN is enabled with
'ethtool -s eth0 wol g', the box hangs solid during all of these
operations, while executing either sky2_suspend(), or
sky2_shutdown(). This patch fixes it for me.
Signed-off-by: Rafael J. Wysocki <rjw@...k.pl>
---
drivers/net/sky2.c | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
Index: linux-2.6/drivers/net/sky2.c
===================================================================
--- linux-2.6.orig/drivers/net/sky2.c
+++ linux-2.6/drivers/net/sky2.c
@@ -666,11 +666,16 @@ static void sky2_phy_power_down(struct s
if (hw->chip_id != CHIP_ID_YUKON_EC) {
if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
- ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
+ /* select page 2 to access MAC control register */
+ gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 2);
+ ctrl = gm_phy_read(hw, port, PHY_MARV_PHY_CTRL);
/* enable Power Down */
ctrl |= PHY_M_PC_POW_D_ENA;
gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, ctrl);
+
+ /* set page register back to 0 */
+ gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0);
}
/* set IEEE compatible Power Down Mode (dev. #4.99) */
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists