Message-ID: <bc64b4640906050640n77bddf37u8e549dff72508c2d@mail.gmail.com>
Date:	Fri, 5 Jun 2009 17:40:45 +0400
From:	Dmitry Eremin-Solenikov <dbaryshkov@...il.com>
To:	Marcel Holtmann <marcel@...tmann.org>
Cc:	linux-kernel@...r.kernel.org, netdev@...r.kernel.org,
	linux-wireless@...r.kernel.org, slapin@...fans.org,
	davem@...emloft.net, Stephen Rothwell <sfr@...b.auug.org.au>
Subject: Re: [PATCH 4/5] ieee802154: add documentation about our stack

2009/6/5 Marcel Holtmann <marcel@...tmann.org>:
> Hi Dmitry,
>
>> Add MAINTAINERS entry and a small text describing our stack interfaces,
>> how to hook the drivers, etc.
>>
>> Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@...il.com>
>> Signed-off-by: Sergey Lapin <slapin@...fans.org>
>> ---
>>  Documentation/networking/ieee802154.txt |   76 +++++++++++++++++++++++++++++++
>>  MAINTAINERS                             |   12 +++++
>>  2 files changed, 88 insertions(+), 0 deletions(-)
>>  create mode 100644 Documentation/networking/ieee802154.txt
>>
>> diff --git a/Documentation/networking/ieee802154.txt b/Documentation/networking/ieee802154.txt
>> new file mode 100644
>> index 0000000..a0280ad
>> --- /dev/null
>> +++ b/Documentation/networking/ieee802154.txt
>> @@ -0,0 +1,76 @@
>> +
>> +             Linux IEEE 802.15.4 implementation
>> +
>> +
>> +Introduction
>> +============
>> +
>> +The Linux-ZigBee project goal is to provide complete implementation
>> +of IEEE 802.15.4 / ZigBee / 6LoWPAN protocols. IEEE 802.15.4 is a stack
>> +of protocols for organizing Low-Rate Wireless Personal Area Networks.
>> +
>> +Currently only IEEE 802.15.4 layer is implemented. We have choosen
>> +to use plain Berkeley socket API, the generic Linux networking stack
>> +to transfer IEEE 802.15.4 messages and a special protocol over genetlink
>> +for configuration/management
>> +
>> +
>> +Socket API
>> +==========
>> +
>> +int sd = socket(PF_IEEE802154, SOCK_DGRAM, 0);
>> +.....
>> +
>> +The address family, socket addresses etc. are defined in the
>> +include/net/ieee802154/af_ieee802154.h header or in the special header
>> +in our userspace package (see either linux-zigbee sourceforge download page
>> +or git tree at git://linux-zigbee.git.sourceforge.net/gitroot/linux-zigbee).
>> +
>> +One can use SOCK_RAW for passing raw data towards device xmit function. YMMV.
>> +
>> +
>> +MLME - MAC Level Management
>> +============================
>> +
>> +Most of IEEE 802.15.4 MLME interfaces are directly mapped on netlink commands.
>> +See the include/net/ieee802154/nl802154.h header. Our userspace tools package
>> +(see above) provides CLI configuration utility for radio interfaces and simple
>> +coordinator for IEEE 802.15.4 networks as an example users of MLME protocol.
>> +
>> +
>> +Kernel side
>> +=============
>> +
>> +Like with WiFi, there are several types of devices implementing IEEE 802.15.4.
>> +1) 'HardMAC'. The MAC layer is implemented in the device itself, the device
>> +   exports MLME and data API.
>> +2) 'SoftMAC' or just radio. These types of devices are just radio transceivers
>> +   possibly with some kinds of acceleration like automatic CRC computation and
>> +   comparation, automagic ACK handling, address matching, etc.
>> +
>> +Those types of devices require different approach to be hooked into Linux kernel.
>> +
>> +
>> +HardMAC
>> +=======
>> +
>> +See the header include/net/ieee802154/netdevice.h. You have to implement Linux
>> +net_device, with .type = ARPHRD_IEEE802154. Data is exchanged with socket family
>> +code via plain sk_buffs. The control block of sk_buffs will contain additional
>> +info as described in the struct ieee802154_mac_cb.
>
> are you sending IP packets over this ARPHRD_IEEE802154 network devices
> or are you just abusing it as a control interface. If it is the later
> then can we please stop doing this. I really dislike these irda0,
> wmaster0 and alike stuff. If you can't configure it as real IP device,
> you should not use struct net_device at all from my point of view. For
> all your control details you have netlink so no need for an extra device
> here unless it can actually talk IP (or similar like IPX etc.).

Hmm. Once I've thought about it, as net_device seemed a Really Big Thing to me
to be used for our stack. However from the beginning we wanted to use plain BSD
sockets API, we wanted to use sk_buffs (of course) for the whole
message interface.
And when prototyping lowpan_device, I ended duplicating lots of net_device
functionality on my own.
Either we have to develop some lightweight "net_device" abstracted from IP & Ko,
but containing sk_buff queues, header ops, etc, or end up with functionality
duplication and hacks like in bluetooth (where skb->dev is used to store hci_dev
instead of net_device).

Hmm. AX.25, AppleTalk, CAN, DecNet, most of other procotols sitting inside
Linux kernel do use net_device structure, why should we differ?

Moreover, once we implement 6lowpan support (an encapsulation for IPv6 frames
into IEEE 802.15.4 ones) it will be possible to send IPv6 frames directly over
IEEE 802.15.4.

-- 
With best wishes
Dmitry
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Powered by blists - more mailing lists