| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <BAY103-DAV841A131306FD596747306B2440@phx.gbl> Date: Tue, 9 Jun 2009 18:07:33 +0200 From: "Marco Berizzi" <pupilla@...mail.com> To: "Eric Dumazet" <eric.dumazet@...il.com> Cc: <netdev@...r.kernel.org> Subject: Re: tigon3 firmware problem with 2.6.30-rc8 Eric Dumazet wrote: > Marco Berizzi a écrit : > > Hi folks, > > > > I have a problem with a 3 years old notebook NIC, > > tg3 with linux 2.6.29.4 and 2.6.30-rc8. > > When I modprobe tg3 all is fine. When I issue > > 'ifconfig eth0 1.1.1.1' I get this message: > > > > tg3 0000:02:0e.0: firmware: requesting tigon/tg3_tso5.bin > > eth0: Failed to load firmware "tigon/tg3_tso5.bin" > > eth0: TSO capability disabled. > > tg3 0000:02:0e.0: PME# disabled > > tg3: eth0: Link is up at 100 Mbps, full duplex. > > tg3: eth0: Flow control is off for TX and off for RX > > > > This is the output from ls -l /lib/firmware/tigon: > > > > root@...war:~# ls -l /lib/firmware/tigon > > total 16 > > -rw-r--r-- 1 root root 2668 2009-06-09 17:18 tg3.bin > > -rw-r--r-- 1 root root 7004 2009-06-09 17:18 tg3_tso.bin > > -rw-r--r-- 1 root root 3884 2009-06-09 17:18 tg3_tso5.bin > > root@...war:~# > > > > However the nic is working. > > > > Any feed-back are welcome, > > TIA > > > > You could try to set CONFIG_FIRMWARE_IN_KERNEL=y in your .config same problem :-(( -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@...r.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists