[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <4A2E83C9.6020600@gmail.com>
Date: Tue, 09 Jun 2009 17:46:17 +0200
From: Eric Dumazet <eric.dumazet@...il.com>
To: Marco Berizzi <pupilla@...mail.com>
CC: netdev@...r.kernel.org
Subject: Re: tigon3 firmware problem with 2.6.30-rc8
Marco Berizzi a écrit :
> Hi folks,
>
> I have a problem with a 3 years old notebook NIC,
> tg3 with linux 2.6.29.4 and 2.6.30-rc8.
> When I modprobe tg3 all is fine. When I issue
> 'ifconfig eth0 1.1.1.1' I get this message:
>
> tg3 0000:02:0e.0: firmware: requesting tigon/tg3_tso5.bin
> eth0: Failed to load firmware "tigon/tg3_tso5.bin"
> eth0: TSO capability disabled.
> tg3 0000:02:0e.0: PME# disabled
> tg3: eth0: Link is up at 100 Mbps, full duplex.
> tg3: eth0: Flow control is off for TX and off for RX
>
> This is the output from ls -l /lib/firmware/tigon:
>
> root@...war:~# ls -l /lib/firmware/tigon
> total 16
> -rw-r--r-- 1 root root 2668 2009-06-09 17:18 tg3.bin
> -rw-r--r-- 1 root root 7004 2009-06-09 17:18 tg3_tso.bin
> -rw-r--r-- 1 root root 3884 2009-06-09 17:18 tg3_tso5.bin
> root@...war:~#
>
> However the nic is working.
>
> Any feed-back are welcome,
> TIA
>
You could try to set CONFIG_FIRMWARE_IN_KERNEL=y in your .config
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists