[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1244647805.2848.10.camel@achroite>
Date: Wed, 10 Jun 2009 16:30:05 +0100
From: Ben Hutchings <bhutchings@...arflare.com>
To: David Miller <davem@...emloft.net>
Cc: netdev@...r.kernel.org, linux-net-drivers@...arflare.com
Subject: [PATCH 2/2] sfc: Expose 100/1000BASE-T MDI-X status via ethtool
Signed-off-by: Ben Hutchings <bhutchings@...arflare.com>
---
drivers/net/sfc/tenxpress.c | 11 ++++++++++-
1 files changed, 10 insertions(+), 1 deletions(-)
diff --git a/drivers/net/sfc/tenxpress.c b/drivers/net/sfc/tenxpress.c
index db723c5..f4d5090 100644
--- a/drivers/net/sfc/tenxpress.c
+++ b/drivers/net/sfc/tenxpress.c
@@ -63,6 +63,7 @@
/* extended status register */
#define PMA_PMD_XSTATUS_REG 49153
+#define PMA_PMD_XSTAT_MDIX_LBN 14
#define PMA_PMD_XSTAT_FLP_LBN (12)
/* LED control register */
@@ -741,9 +742,17 @@ tenxpress_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd)
mdio45_ethtool_gset_npage(&efx->mdio, ecmd, adv, lpa);
- if (efx->phy_type != PHY_TYPE_SFX7101)
+ if (efx->phy_type != PHY_TYPE_SFX7101) {
ecmd->supported |= (SUPPORTED_100baseT_Full |
SUPPORTED_1000baseT_Full);
+ if (ecmd->speed != SPEED_10000) {
+ ecmd->eth_tp_mdix =
+ (efx_mdio_read(efx, MDIO_MMD_PMAPMD,
+ PMA_PMD_XSTATUS_REG) &
+ (1 << PMA_PMD_XSTAT_MDIX_LBN))
+ ? ETH_TP_MDI_X : ETH_TP_MDI;
+ }
+ }
/* In loopback, the PHY automatically brings up the correct interface,
* but doesn't advertise the correct speed. So override it */
--
Ben Hutchings, Senior Software Engineer, Solarflare Communications
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists