[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <4B555C12.1060909@cn.fujitsu.com>
Date: Tue, 19 Jan 2010 15:15:30 +0800
From: Yang Hongyang <yanghy@...fujitsu.com>
To: Koki Sanagi <sanagi.koki@...fujitsu.com>
CC: netdev@...r.kernel.org, davem@...emloft.net, nhorman@...driver.com,
izumi.taku@...fujitsu.com, kaneshige.kenji@...fujitsu.com
Subject: Re: [PATCH 0/5] tracing/events: add tracepoint to TCP/IP stack and
netdev layer
Koki Sanagi wrote:
> These patch-set adds some tracepoints to the TCP/IP stack and netdev layer.
Your patch-set is mainly for IPv4,I think you'd better mantion that in your
title.^!^
>
> As described below,
> http://marc.info/?l=linux-netdev&m=126096487212459&w=2
> dev_hard_start_xmit and netif_receive_skb are important location to add
> tracepoints. Because driver depends on an machine environment, we usually
> check this point when solving network problem. But these two points are lack of
> infrotmation that what packets are passed, So I add other tracepoints to know
> what packets are passed and to give some merits.
>
> Added tracepoints are at transmit/receive entry of TCP, UDP, RAW, IPv4, driver
> and Qdisc. And tracepoints to output information to make connection
> between these entry tracepoints are also added.
>
> These tracepoints give some merits.
> For example, they enable us to measure packet latency.
> By using tcpdump, we can analyze what packets are passed, but we cannot analyze
> how long it takes to pass through network layer(In other words, latency of TCP
> layer, IP layer and Qdisc).
> Packet latency is very useful information to solve a network bad performance or
> bad reaction network application, packet latency is very useful information.
>
> As an other use case, unlike a tcpdump, they are recorded in ftrace buffer
> without IO burden. Only when you need, output recorded information.
> I mean, they are fit to run always.
>
> Details of added tracepoint are below.
>
> skb_clone chase the cloned skb
> senddata_copy_skb copy userdata to skb for transmit
>
> netdev_start_xmit entry of driver's transmit function.
> netdev_receive_skb entry of netstack(receive).
> dev_queue_xmit entry of Qdisc.
>
> ip_queue_xmit entry of IP layer(TCP transmit)
> ip_push_pending_frames entry of IP layer(UDP transmit)
> ip_output entry of IP layer(RAW transmit)
> ip_frag_queue aggregate fragmented packet
> ip_frag_reasm reasemble fragmented packet
> ip_rcv entry of IP layer(receive)
>
> tcp_sendmsg entry of TCP layer(transmit)
> tcp_sendpage entry of TCP layer(transmit)
> tcp_push_pending_frames all data(tcp_sendmsg have) have copied to skb
> tcp_v4_rcv entry of TCP layer(receive)
>
> udp_sendmsg entry of UDP layer(transmit)
> udp_sendpage entry of UDP layer(transmit)
> udp_push_pending_frames all data(udp_sendmsg have) have copied to skb
> udp_rcv entry of UDP layer(receive).
>
> raw_sendmsg entry of RAW layer(transmit).
> raw_rcv entry of RAW layer(receive).
>
> Outputs are below.
>
> TCP send
> netperf-2513 [000] 2603.586818: tcp_sendmsg: sk=f644eac0 len=5000
> netperf-2513 [000] 2603.586818: senddata_copy_skb: sk=f644eac0 skbaddr=f7159800 len=1416
> netperf-2513 [000] 2603.586820: senddata_copy_skb: sk=f644eac0 skbaddr=f7159500 len=1448
> netperf-2513 [000] 2603.586821: senddata_copy_skb: sk=f644eac0 skbaddr=f7158d80 len=1448
> netperf-2513 [000] 2603.586822: senddata_copy_skb: sk=f644eac0 skbaddr=f7159c80 len=688
> netperf-2513 [000] 2603.586822: tcp_push_pending_frames: sk=f644eac0 sport=54875 dport=51707
> tail-2514 [001] 2603.587577: skb_clone: original=f7159800 clone=f71598b4
> tail-2514 [001] 2603.587578: ip_queue_xmit: skbaddr=f71598b4 saddr=192.168.100.5 daddr=192.168.100.2
> tail-2514 [001] 2603.587579: ip_output: skbaddr=f71598b4 saddr=192.168.100.5 daddr=192.168.100.2
> tail-2514 [001] 2603.587579: dev_queue_xmit: dev=eth10 skbaddr=f71598b4 len=1514
> tail-2514 [001] 2603.587580: netdev_start_xmit: dev=eth10 skbaddr=f71598b4 len=1514
> tail-2514 [001] 2603.587628: skb_clone: original=f7159500 clone=f71595b4
> tail-2514 [001] 2603.587629: ip_queue_xmit: skbaddr=f71595b4 saddr=192.168.100.5 daddr=192.168.100.2
> tail-2514 [001] 2603.587630: ip_output: skbaddr=f71595b4 saddr=192.168.100.5 daddr=192.168.100.2
> tail-2514 [001] 2603.587631: dev_queue_xmit: dev=eth10 skbaddr=f71595b4 len=1514
> tail-2514 [001] 2603.587632: netdev_start_xmit: dev=eth10 skbaddr=f71595b4 len=1514
> tail-2514 [001] 2603.587632: skb_clone: original=f7158d80 clone=f7158e34
> tail-2514 [001] 2603.587633: ip_queue_xmit: skbaddr=f7158e34 saddr=192.168.100.5 daddr=192.168.100.2
> tail-2514 [001] 2603.587634: ip_output: skbaddr=f7158e34 saddr=192.168.100.5 daddr=192.168.100.2
> tail-2514 [001] 2603.587635: dev_queue_xmit: dev=eth10 skbaddr=f7158e34 len=1514
> tail-2514 [001] 2603.587635: netdev_start_xmit: dev=eth10 skbaddr=f7158e34 len=1514
> tail-2514 [001] 2603.587685: skb_clone: original=f7159c80 clone=f7159d34
> tail-2514 [001] 2603.587685: ip_queue_xmit: skbaddr=f7159d34 saddr=192.168.100.5 daddr=192.168.100.2
> tail-2514 [001] 2603.587687: ip_output: skbaddr=f7159d34 saddr=192.168.100.5 daddr=192.168.100.2
> tail-2514 [001] 2603.587687: dev_queue_xmit: dev=eth10 skbaddr=f7159d34 len=1514
> tail-2514 [001] 2603.587688: netdev_start_xmit: dev=eth10 skbaddr=f7159d34 len=1514
>
> TCP recv
> <idle>-0 [001] 3499.386601: netdev_receive_skb: dev=eth10 skbaddr=f4a88480 len=1500
> <idle>-0 [001] 3499.386602: ip_rcv: skbaddr=f4a88480 saddr=192.168.100.2 daddr=192.168.100.5
> <idle>-0 [001] 3499.386604: tcp_v4_rcv: skbaddr=f4a88480 sport=51035 dport=34474
> <idle>-0 [000] 3499.386619: netdev_receive_skb: dev=eth10 skbaddr=f3c75300 len=1500
> <idle>-0 [000] 3499.386619: ip_rcv: skbaddr=f3c75300 saddr=192.168.100.2 daddr=192.168.100.5
> <idle>-0 [000] 3499.386622: tcp_v4_rcv: skbaddr=f3c75300 sport=51035 dport=34474
> netserver-2519 [000] 3499.386626: skb_copy_datagram_iovec: skbaddr=f4a88480 len=1448
> netserver-2519 [000] 3499.386628: skb_copy_datagram_iovec: skbaddr=f3c75300 len=1448
>
> UDP send
> netperf-2506 [001] 2309.073460: udp_sendmsg: sk=f662e6c0 len=5000
> netperf-2506 [001] 2309.073466: senddata_copy_skb: sk=f662e6c0 skbaddr=f5f65780 len=1472
> netperf-2506 [001] 2309.073467: senddata_copy_skb: sk=f662e6c0 skbaddr=f5f65000 len=1480
> netperf-2506 [001] 2309.073468: senddata_copy_skb: sk=f662e6c0 skbaddr=f3decf00 len=1480
> netperf-2506 [001] 2309.073469: senddata_copy_skb: sk=f662e6c0 skbaddr=f4802840 len=568
> netperf-2506 [001] 2309.073470: udp_push_pending_frames: sk=f662e6c0 sport=42679 dport=47640
> netperf-2506 [001] 2309.073470: ip_push_pending_frames: skbaddr=f5f65780 saddr=192.168.100.5 daddr=192.168.100.2
> netperf-2506 [001] 2309.073471: ip_output: skbaddr=f5f65780 saddr=192.168.100.5 daddr=192.168.100.2
> netperf-2506 [001] 2309.073472: dev_queue_xmit: dev=eth10 skbaddr=f5f65780 len=1514
> netperf-2506 [001] 2309.073473: dev_queue_xmit: dev=eth10 skbaddr=f5f65000 len=1514
> netperf-2506 [001] 2309.073474: dev_queue_xmit: dev=eth10 skbaddr=f3decf00 len=1514
> netperf-2506 [001] 2309.073474: dev_queue_xmit: dev=eth10 skbaddr=f4802840 len=602
> <idle>-0 [001] 2309.073615: netdev_start_xmit: dev=eth10 skbaddr=f5f65780 len=1514
> <idle>-0 [001] 2309.073616: netdev_start_xmit: dev=eth10 skbaddr=f5f65000 len=1514
> <idle>-0 [000] 2309.073633: netdev_start_xmit: dev=eth10 skbaddr=f3decf00 len=1514
> <idle>-0 [000] 2309.073633: netdev_start_xmit: dev=eth10 skbaddr=f4802840 len=602
>
> UDP recv
> <idle>-0 [001] 3671.663678: netdev_receive_skb: dev=eth10 skbaddr=f5f72d80 len=1500
> <idle>-0 [001] 3671.663678: ip_rcv: skbaddr=f5f72d80 saddr=192.168.100.2 daddr=192.168.100.5
> <idle>-0 [001] 3671.663680: ip_frag_queue: skbaddr=f5f72d80 prev=(null)
> <idle>-0 [001] 3671.663681: netdev_receive_skb: dev=eth10 skbaddr=f5f6aa80 len=1500
> <idle>-0 [001] 3671.663681: ip_rcv: skbaddr=f5f6aa80 saddr=192.168.100.2 daddr=192.168.100.5
> <idle>-0 [001] 3671.663681: ip_frag_queue: skbaddr=f5f6aa80 prev=f5f72d80
> <idle>-0 [000] 3671.663702: netdev_receive_skb: dev=eth10 skbaddr=f4800840 len=1500
> <idle>-0 [000] 3671.663703: ip_rcv: skbaddr=f4800840 saddr=192.168.100.2 daddr=192.168.100.5
> <idle>-0 [000] 3671.663703: ip_frag_queue: skbaddr=f4800840 prev=f5f6aa80
> <idle>-0 [000] 3671.663704: netdev_receive_skb: dev=eth10 skbaddr=f4a88b40 len=588
> <idle>-0 [000] 3671.663705: ip_rcv: skbaddr=f4a88b40 saddr=192.168.100.2 daddr=192.168.100.5
> <idle>-0 [000] 3671.663705: ip_frag_queue: skbaddr=f4a88b40 prev=f4800840
> <idle>-0 [000] 3671.663706: skb_clone: original=f4a88b40 clone=f5fff480
> <idle>-0 [000] 3671.663707: kfree_skb: skbaddr=f5f72d80 protocol=2048 location=c0715f1a
> <idle>-0 [000] 3671.663707: ip_frag_reasm: head=f4a88b40 len=1480
> <idle>-0 [000] 3671.663711: udp_rcv: skbaddr=f4a88b40 sport=57915 dport=37634
> netserver-2525 [000] 3671.663718: skb_copy_datagram_iovec: skbaddr=f4a88b40 len=5000
> netserver-2525 [000] 3671.663718: skb_copy_datagram_iovec: skbaddr=f5f6aa80 len=1480
> netserver-2525 [000] 3671.663719: skb_copy_datagram_iovec: skbaddr=f4800840 len=1480
> netserver-2525 [000] 3671.663719: skb_copy_datagram_iovec: skbaddr=f5fff480 len=568
>
> RAW send
> send-2431 [001] 1813.799957: raw_sendmsg: sk=f4a37200 len=1500
> send-2431 [001] 1813.799959: senddata_copy_skb: sk=f4a37200 skbaddr=f3dec180 len=1500
> send-2431 [001] 1813.799960: ip_output: skbaddr=f3dec180 saddr=192.168.100.5 daddr=192.168.100.2
> send-2431 [001] 1813.799960: dev_queue_xmit: dev=eth10 skbaddr=f3dec180 len=1514
> send-2431 [001] 1813.799961: netdev_start_xmit: dev=eth10 skbaddr=f3dec180 len=1514
>
> RAW recv
> <idle>-0 [000] 2052.858947: netdev_receive_skb: dev=eth1 skbaddr=f5f66000 len=1500
> <idle>-0 [000] 2052.858947: ip_rcv: skbaddr=f5f66000 saddr=192.168.101.2 daddr=192.168.101.5
> <idle>-0 [000] 2052.858951: skb_clone: original=f5f66000 clone=f3e43cc0
> <idle>-0 [000] 2052.858952: raw_rcv: skbaddr=f3e43cc0 len=1476
> recv-2499 [001] 2052.858970: skb_copy_datagram_iovec: skbaddr=f3e43cc0 len=1500
>
> Best Regards,
> Koki Sanagi <sanagi.koki@...fujitsu.com>
>
> --
> To unsubscribe from this list: send the line "unsubscribe netdev" in
> the body of a message to majordomo@...r.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
>
--
Regards
Yang Hongyang
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists