lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <4B565786.9070503@jp.fujitsu.com>
Date:	Wed, 20 Jan 2010 10:08:22 +0900
From:	Koki Sanagi <sanagi.koki@...fujitsu.com>
To:	Yang Hongyang <yanghy@...fujitsu.com>
CC:	netdev@...r.kernel.org, davem@...emloft.net, nhorman@...driver.com,
	izumi.taku@...fujitsu.com, kaneshige.kenji@...fujitsu.com
Subject: Re: [PATCH 0/5] tracing/events: add tracepoint to TCP/IP stack and
 netdev layer

Thanks for your reply.

(2010/01/19 16:15), Yang Hongyang wrote:
> Koki Sanagi wrote:
>> These patch-set adds some tracepoints to the TCP/IP stack and netdev layer.
> 
> Your patch-set is mainly for IPv4,I think you'd better mantion that in your
> title.^!^
> 
Yeah, you're right.
I'll change the title next time.

Best regards,
Koki Sanagi

>>
>> As described below,
>> http://marc.info/?l=linux-netdev&m=126096487212459&w=2
>> dev_hard_start_xmit and netif_receive_skb are important location to add
>> tracepoints. Because driver depends on an machine environment, we usually
>> check this point when solving network problem. But these two points are lack of
>> infrotmation that what packets are passed, So I add other tracepoints to know
>> what packets are passed and to give some merits.
>>
>> Added tracepoints are at transmit/receive entry of TCP, UDP, RAW, IPv4, driver
>> and Qdisc. And tracepoints to output information to make connection
>> between these entry tracepoints are also added.
>>
>> These tracepoints give some merits.
>> For example, they enable us to measure packet latency.
>> By using tcpdump, we can analyze what packets are passed, but we cannot analyze
>> how long it takes to pass through network layer(In other words, latency of TCP
>> layer, IP layer and Qdisc).
>> Packet latency is very useful information to solve a network bad performance or
>> bad reaction network application, packet latency is very useful information.
>>
>> As an other use case, unlike a tcpdump, they are recorded in ftrace buffer
>> without IO burden. Only when you need, output recorded information.
>> I mean, they are fit to run always.
>>
>> Details of added tracepoint are below.
>>
>> skb_clone               chase the cloned skb
>> senddata_copy_skb       copy userdata to skb for transmit
>>
>> netdev_start_xmit       entry of driver's transmit function.
>> netdev_receive_skb      entry of netstack(receive).
>> dev_queue_xmit          entry of Qdisc.	
>>
>> ip_queue_xmit           entry of IP layer(TCP transmit)
>> ip_push_pending_frames  entry of IP layer(UDP transmit)
>> ip_output               entry of IP layer(RAW transmit)
>> ip_frag_queue           aggregate fragmented packet
>> ip_frag_reasm           reasemble fragmented packet
>> ip_rcv                  entry of IP layer(receive)
>>
>> tcp_sendmsg             entry of TCP layer(transmit)
>> tcp_sendpage            entry of TCP layer(transmit)
>> tcp_push_pending_frames all data(tcp_sendmsg have) have copied to skb
>> tcp_v4_rcv              entry of TCP layer(receive)
>>
>> udp_sendmsg             entry of UDP layer(transmit)
>> udp_sendpage            entry of UDP layer(transmit)
>> udp_push_pending_frames all data(udp_sendmsg have) have copied to skb
>> udp_rcv                 entry of UDP layer(receive).
>>
>> raw_sendmsg             entry of RAW layer(transmit).
>> raw_rcv                 entry of RAW layer(receive).
>>
>> Outputs are below.
>>
>> TCP send
>>           netperf-2513  [000]  2603.586818: tcp_sendmsg: sk=f644eac0 len=5000
>>           netperf-2513  [000]  2603.586818: senddata_copy_skb: sk=f644eac0 skbaddr=f7159800 len=1416
>>           netperf-2513  [000]  2603.586820: senddata_copy_skb: sk=f644eac0 skbaddr=f7159500 len=1448
>>           netperf-2513  [000]  2603.586821: senddata_copy_skb: sk=f644eac0 skbaddr=f7158d80 len=1448
>>           netperf-2513  [000]  2603.586822: senddata_copy_skb: sk=f644eac0 skbaddr=f7159c80 len=688
>>           netperf-2513  [000]  2603.586822: tcp_push_pending_frames: sk=f644eac0 sport=54875 dport=51707
>>              tail-2514  [001]  2603.587577: skb_clone: original=f7159800 clone=f71598b4
>>              tail-2514  [001]  2603.587578: ip_queue_xmit: skbaddr=f71598b4 saddr=192.168.100.5 daddr=192.168.100.2
>>              tail-2514  [001]  2603.587579: ip_output: skbaddr=f71598b4 saddr=192.168.100.5 daddr=192.168.100.2
>>              tail-2514  [001]  2603.587579: dev_queue_xmit: dev=eth10 skbaddr=f71598b4 len=1514
>>              tail-2514  [001]  2603.587580: netdev_start_xmit: dev=eth10 skbaddr=f71598b4 len=1514
>>              tail-2514  [001]  2603.587628: skb_clone: original=f7159500 clone=f71595b4
>>              tail-2514  [001]  2603.587629: ip_queue_xmit: skbaddr=f71595b4 saddr=192.168.100.5 daddr=192.168.100.2
>>              tail-2514  [001]  2603.587630: ip_output: skbaddr=f71595b4 saddr=192.168.100.5 daddr=192.168.100.2
>>              tail-2514  [001]  2603.587631: dev_queue_xmit: dev=eth10 skbaddr=f71595b4 len=1514
>>              tail-2514  [001]  2603.587632: netdev_start_xmit: dev=eth10 skbaddr=f71595b4 len=1514
>>              tail-2514  [001]  2603.587632: skb_clone: original=f7158d80 clone=f7158e34
>>              tail-2514  [001]  2603.587633: ip_queue_xmit: skbaddr=f7158e34 saddr=192.168.100.5 daddr=192.168.100.2
>>              tail-2514  [001]  2603.587634: ip_output: skbaddr=f7158e34 saddr=192.168.100.5 daddr=192.168.100.2
>>              tail-2514  [001]  2603.587635: dev_queue_xmit: dev=eth10 skbaddr=f7158e34 len=1514
>>              tail-2514  [001]  2603.587635: netdev_start_xmit: dev=eth10 skbaddr=f7158e34 len=1514
>>              tail-2514  [001]  2603.587685: skb_clone: original=f7159c80 clone=f7159d34
>>              tail-2514  [001]  2603.587685: ip_queue_xmit: skbaddr=f7159d34 saddr=192.168.100.5 daddr=192.168.100.2
>>              tail-2514  [001]  2603.587687: ip_output: skbaddr=f7159d34 saddr=192.168.100.5 daddr=192.168.100.2
>>              tail-2514  [001]  2603.587687: dev_queue_xmit: dev=eth10 skbaddr=f7159d34 len=1514
>>              tail-2514  [001]  2603.587688: netdev_start_xmit: dev=eth10 skbaddr=f7159d34 len=1514
>>
>> TCP recv
>>            <idle>-0     [001]  3499.386601: netdev_receive_skb: dev=eth10 skbaddr=f4a88480 len=1500
>>            <idle>-0     [001]  3499.386602: ip_rcv: skbaddr=f4a88480 saddr=192.168.100.2 daddr=192.168.100.5
>>            <idle>-0     [001]  3499.386604: tcp_v4_rcv: skbaddr=f4a88480 sport=51035 dport=34474
>>            <idle>-0     [000]  3499.386619: netdev_receive_skb: dev=eth10 skbaddr=f3c75300 len=1500
>>            <idle>-0     [000]  3499.386619: ip_rcv: skbaddr=f3c75300 saddr=192.168.100.2 daddr=192.168.100.5
>>            <idle>-0     [000]  3499.386622: tcp_v4_rcv: skbaddr=f3c75300 sport=51035 dport=34474
>>         netserver-2519  [000]  3499.386626: skb_copy_datagram_iovec: skbaddr=f4a88480 len=1448
>>         netserver-2519  [000]  3499.386628: skb_copy_datagram_iovec: skbaddr=f3c75300 len=1448
>>
>> UDP send
>>           netperf-2506  [001]  2309.073460: udp_sendmsg: sk=f662e6c0 len=5000
>>           netperf-2506  [001]  2309.073466: senddata_copy_skb: sk=f662e6c0 skbaddr=f5f65780 len=1472
>>           netperf-2506  [001]  2309.073467: senddata_copy_skb: sk=f662e6c0 skbaddr=f5f65000 len=1480
>>           netperf-2506  [001]  2309.073468: senddata_copy_skb: sk=f662e6c0 skbaddr=f3decf00 len=1480
>>           netperf-2506  [001]  2309.073469: senddata_copy_skb: sk=f662e6c0 skbaddr=f4802840 len=568
>>           netperf-2506  [001]  2309.073470: udp_push_pending_frames: sk=f662e6c0 sport=42679 dport=47640
>>           netperf-2506  [001]  2309.073470: ip_push_pending_frames: skbaddr=f5f65780 saddr=192.168.100.5 daddr=192.168.100.2
>>           netperf-2506  [001]  2309.073471: ip_output: skbaddr=f5f65780 saddr=192.168.100.5 daddr=192.168.100.2
>>           netperf-2506  [001]  2309.073472: dev_queue_xmit: dev=eth10 skbaddr=f5f65780 len=1514
>>           netperf-2506  [001]  2309.073473: dev_queue_xmit: dev=eth10 skbaddr=f5f65000 len=1514
>>           netperf-2506  [001]  2309.073474: dev_queue_xmit: dev=eth10 skbaddr=f3decf00 len=1514
>>           netperf-2506  [001]  2309.073474: dev_queue_xmit: dev=eth10 skbaddr=f4802840 len=602
>>            <idle>-0     [001]  2309.073615: netdev_start_xmit: dev=eth10 skbaddr=f5f65780 len=1514
>>            <idle>-0     [001]  2309.073616: netdev_start_xmit: dev=eth10 skbaddr=f5f65000 len=1514
>>            <idle>-0     [000]  2309.073633: netdev_start_xmit: dev=eth10 skbaddr=f3decf00 len=1514
>>            <idle>-0     [000]  2309.073633: netdev_start_xmit: dev=eth10 skbaddr=f4802840 len=602
>>
>> UDP recv
>>            <idle>-0     [001]  3671.663678: netdev_receive_skb: dev=eth10 skbaddr=f5f72d80 len=1500
>>            <idle>-0     [001]  3671.663678: ip_rcv: skbaddr=f5f72d80 saddr=192.168.100.2 daddr=192.168.100.5
>>            <idle>-0     [001]  3671.663680: ip_frag_queue: skbaddr=f5f72d80 prev=(null)
>>            <idle>-0     [001]  3671.663681: netdev_receive_skb: dev=eth10 skbaddr=f5f6aa80 len=1500
>>            <idle>-0     [001]  3671.663681: ip_rcv: skbaddr=f5f6aa80 saddr=192.168.100.2 daddr=192.168.100.5
>>            <idle>-0     [001]  3671.663681: ip_frag_queue: skbaddr=f5f6aa80 prev=f5f72d80
>>            <idle>-0     [000]  3671.663702: netdev_receive_skb: dev=eth10 skbaddr=f4800840 len=1500
>>            <idle>-0     [000]  3671.663703: ip_rcv: skbaddr=f4800840 saddr=192.168.100.2 daddr=192.168.100.5
>>            <idle>-0     [000]  3671.663703: ip_frag_queue: skbaddr=f4800840 prev=f5f6aa80
>>            <idle>-0     [000]  3671.663704: netdev_receive_skb: dev=eth10 skbaddr=f4a88b40 len=588
>>            <idle>-0     [000]  3671.663705: ip_rcv: skbaddr=f4a88b40 saddr=192.168.100.2 daddr=192.168.100.5
>>            <idle>-0     [000]  3671.663705: ip_frag_queue: skbaddr=f4a88b40 prev=f4800840
>>            <idle>-0     [000]  3671.663706: skb_clone: original=f4a88b40 clone=f5fff480
>>            <idle>-0     [000]  3671.663707: kfree_skb: skbaddr=f5f72d80 protocol=2048 location=c0715f1a
>>            <idle>-0     [000]  3671.663707: ip_frag_reasm: head=f4a88b40 len=1480
>>            <idle>-0     [000]  3671.663711: udp_rcv: skbaddr=f4a88b40 sport=57915 dport=37634
>>         netserver-2525  [000]  3671.663718: skb_copy_datagram_iovec: skbaddr=f4a88b40 len=5000
>>         netserver-2525  [000]  3671.663718: skb_copy_datagram_iovec: skbaddr=f5f6aa80 len=1480
>>         netserver-2525  [000]  3671.663719: skb_copy_datagram_iovec: skbaddr=f4800840 len=1480
>>         netserver-2525  [000]  3671.663719: skb_copy_datagram_iovec: skbaddr=f5fff480 len=568
>>
>> RAW send
>>              send-2431  [001]  1813.799957: raw_sendmsg: sk=f4a37200 len=1500
>>              send-2431  [001]  1813.799959: senddata_copy_skb: sk=f4a37200 skbaddr=f3dec180 len=1500
>>              send-2431  [001]  1813.799960: ip_output: skbaddr=f3dec180 saddr=192.168.100.5 daddr=192.168.100.2
>>              send-2431  [001]  1813.799960: dev_queue_xmit: dev=eth10 skbaddr=f3dec180 len=1514
>>              send-2431  [001]  1813.799961: netdev_start_xmit: dev=eth10 skbaddr=f3dec180 len=1514
>>
>> RAW recv
>>            <idle>-0     [000]  2052.858947: netdev_receive_skb: dev=eth1 skbaddr=f5f66000 len=1500
>>            <idle>-0     [000]  2052.858947: ip_rcv: skbaddr=f5f66000 saddr=192.168.101.2 daddr=192.168.101.5
>>            <idle>-0     [000]  2052.858951: skb_clone: original=f5f66000 clone=f3e43cc0
>>            <idle>-0     [000]  2052.858952: raw_rcv: skbaddr=f3e43cc0 len=1476
>>              recv-2499  [001]  2052.858970: skb_copy_datagram_iovec: skbaddr=f3e43cc0 len=1500
>>
>> Best Regards,
>> Koki Sanagi<sanagi.koki@...fujitsu.com>
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe netdev" in
>> the body of a message to majordomo@...r.kernel.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>>
>>
> 
> 


--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ