[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <51f3faa71003251803q7ccec5d5x82bc277c590e2848@mail.gmail.com>
Date: Thu, 25 Mar 2010 19:03:37 -0600
From: Robert Hancock <hancockrwd@...il.com>
To: FUJITA Tomonori <fujita.tomonori@....ntt.co.jp>
Cc: linux-kernel@...r.kernel.org, netdev@...r.kernel.org,
linux-usb@...r.kernel.org, davem@...emloft.net, bzolnier@...il.com
Subject: Re: [PATCH RFC] fix problems with NETIF_F_HIGHDMA in networking
drivers v2
On Wed, Mar 3, 2010 at 10:58 PM, FUJITA Tomonori
<fujita.tomonori@....ntt.co.jp> wrote:
> On Wed, 03 Mar 2010 20:55:55 -0600
> Robert Hancock <hancockrwd@...il.com> wrote:
>
>> Many networking drivers have issues with the use of the NETIF_F_HIGHDMA flag.
>> This flag actually indicates whether or not the device/driver can handle
>> skbs located in high memory (as opposed to lowmem). If the flag isn't set and
>> the skb is located in highmem, it needs to be copied.
>> There are two problems with this flag:
>>
>> -Many drivers only set the flag when they detect they can use 64-bit DMA,
>> since otherwise they could receive DMA addresses that they can't handle
>> (which on platforms without IOMMU/SWIOTLB support is fatal). This means that if
>> 64-bit support isn't available, even buffers located below 4GB will get copied
>> unnecessarily.
>>
>> -Some drivers set the flag even though they can't actually handle 64-bit DMA,
>> which would mean that on platforms without IOMMU/SWIOTLB they would get a DMA
>> mapping error if the memory they received happened to be located above 4GB.
>>
>> In order to fix this problem, the existing NETIF_F_HIGHDMA flag is split into
>> two new flags:
>>
>> NETIF_F_DMA_HIGH - indicates if the driver can do DMA to highmem at all
>> NETIF_F_DMA_64BIT - indicates the driver can do DMA to 64-bit memory
>
> Why can't you use dev->dma_mask here like the following?
>
> Then you can fix drivers that use the NETIF_F_HIGHDMA flag to indicate
> that they don't support 64bit DMA.
>
> diff --git a/net/core/dev.c b/net/core/dev.c
> index bcc490c..b15f94b 100644
> --- a/net/core/dev.c
> +++ b/net/core/dev.c
> @@ -129,6 +129,7 @@
> #include <linux/jhash.h>
> #include <linux/random.h>
> #include <trace/events/napi.h>
> +#include <linux/pci.h>
>
> #include "net-sysfs.h"
>
> @@ -1787,14 +1788,21 @@ static inline int illegal_highdma(struct net_device *dev, struct sk_buff *skb)
> {
> #ifdef CONFIG_HIGHMEM
> int i;
> + if (!(dev->features & NETIF_F_HIGHDMA)) {
> + for (i = 0; i < skb_shinfo(skb)->nr_frags; i++)
> + if (PageHighMem(skb_shinfo(skb)->frags[i].page))
> + return 1;
> + }
>
> - if (dev->features & NETIF_F_HIGHDMA)
> - return 0;
> -
> - for (i = 0; i < skb_shinfo(skb)->nr_frags; i++)
> - if (PageHighMem(skb_shinfo(skb)->frags[i].page))
> - return 1;
> + if (PCI_DMA_BUS_IS_PHYS) {
> + struct device *pdev = dev->dev.parent;
>
> + for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
> + dma_addr_t addr = page_to_phys(skb_shinfo(skb)->frags[i].page);
> + if (!pdev->dma_mask || addr + PAGE_SIZE - 1 > *pdev->dma_mask)
> + return 1;
> + }
> + }
> #endif
> return 0;
> }
>
This seems like it could be a reasonable approach. The only thing is
that in this code you're returning 1 if the parent device has no DMA
mask set. Wouldn't it make more sense to return 0 in this case? I'm
assuming that in that situation it's a virtual device not backed by
any hardware and there should be no DMA mask restriction...
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists