lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Date:	Wed, 31 Mar 2010 09:51:42 +0200
From:	Anders Darander <anders.darander@...il.com>
To:	Haavard Skinnemoen <hskinnemoen@...el.com>
Cc:	"David S. Miller" <davem@...emloft.net>,
	Jiri Pirko <jpirko@...hat.com>,
	Erik Waling <erik.waling@...ftel.com>,
	Patrick McHardy <kaber@...sh.net>,
	Anders Darander <ad@...arespons.se>,
	Grant Likely <grant.likely@...retlab.ca>,
	netdev@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH] MACB: Set PHY address in kernel parameters

From: Anders Darander <ad@...arespons.se>

Add the possibility to set the phy address. This is needed if an integrated
switch is connected to the MAC, as it is often the case that the highest port
is the one connected to the MAC of the MCU.

E.g. in the case of the Micrel KSZ8873, port 3 is the one to connect to the
MCU, thus, the MAC needs to connect to phy address 0x03, instead of the first
phy found.

Signed-off-by: Anders Darander <ad@...arespons.se>
---
 drivers/net/macb.c |   14 +++++++++++++-
 1 files changed, 13 insertions(+), 1 deletions(-)

diff --git a/drivers/net/macb.c b/drivers/net/macb.c
index c8a18a6..9b4e301 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
@@ -53,6 +53,14 @@
 #define MACB_RX_INT_FLAGS	(MACB_BIT(RCOMP) | MACB_BIT(RXUBR)	\
 				 | MACB_BIT(ISR_ROVR))
 
+/*
+ * Setup PHY probeing
+ */
+
+static int phy_addr = PHY_MAX_ADDR;
+module_param(phy_addr, ushort, 0);
+MODULE_PARAM_DESC(phy_addr, "PHY address connected to the MACB");
+
 static void __macb_set_hwaddr(struct macb *bp)
 {
 	u32 bottom;
@@ -193,7 +201,11 @@ static int macb_mii_probe(struct net_device *dev)
 	struct eth_platform_data *pdata;
 	int ret;
 
-	phydev = phy_find_first(bp->mii_bus);
+	if (phy_addr >= PHY_MAX_ADDRESS)
+		phydev = phy_find_first(bp->mii_bus);
+	else
+		phydev = bp->mii_bus->phy_map[phy_addr];
+
 	if (!phydev) {
 		printk (KERN_ERR "%s: no PHY found\n", dev->name);
 		return -1;
-- 
1.7.0.3

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Powered by blists - more mailing lists