[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <4BB31345.5050101@pengutronix.de>
Date: Wed, 31 Mar 2010 11:17:57 +0200
From: Marc Kleine-Budde <mkl@...gutronix.de>
To: Anders Darander <anders.darander@...il.com>
CC: Haavard Skinnemoen <hskinnemoen@...el.com>,
"David S. Miller" <davem@...emloft.net>,
Jiri Pirko <jpirko@...hat.com>,
Erik Waling <erik.waling@...ftel.com>,
Patrick McHardy <kaber@...sh.net>,
Anders Darander <ad@...arespons.se>,
Grant Likely <grant.likely@...retlab.ca>,
netdev@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH][V2] MACB: Set PHY address in kernel parameters
Anders Darander wrote:
> From: Anders Darander <ad@...arespons.se>
>
> Add the possibility to set the phy address. This is needed if an integrated
> switch is connected to the MAC, as it is often the case that the highest port
> is the one connected to the MAC of the MCU.
>
> E.g. in the case of the Micrel KSZ8873, port 3 is the one to connect to the
> MCU, thus, the MAC needs to connect to phy address 0x03, instead of the first
> phy found.
We're using phy_mask in one of our projects, it's still using 2.6.29,
though. I think it's worth testing if it's still working.
static struct at91_eth_data __initdata p298_macb_data = {
.is_rmii = 0,
.phy_mask = ~(1 << 8),
};
at91_add_device_eth(&p298_macb_data);
cheers, Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Industrial Linux Solutions | Phone: +49-231-2826-924 |
Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
Download attachment "signature.asc" of type "application/pgp-signature" (261 bytes)
Powered by blists - more mailing lists