netdev - Re: forcedeth driver hangs under heavy load

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1271188907.16881.563.camel@edumazet-laptop>
Date:	Tue, 13 Apr 2010 22:01:47 +0200
From:	Eric Dumazet <eric.dumazet@...il.com>
To:	stephen mulcahy <smulcahy@...il.com>
Cc:	Ben Hutchings <bhutchings@...arflare.com>,
	netdev <netdev@...r.kernel.org>,
	Ben Hutchings <ben@...adent.org.uk>,
	Ayaz Abdulla <aabdulla@...dia.com>, 572201@...s.debian.org
Subject: Re: forcedeth driver hangs under heavy load

Le mardi 13 avril 2010 à 16:25 +0100, stephen mulcahy a écrit :
> Eric Dumazet wrote:
> > OK, thanks for clarification.
> > 
> > Last question, did you tried a vanilla kernel, aka 2.6.33.2 for
> > example ?
> 
> I built a Debian package from the vanilla 2.6.33.2 and installed that on 
> all nodes and tried my reproducer with the same results - nodes becoming 
> unresponsive.
> 
> I didn't try changing the tso and tx settings with the 2.6.33.2 kernel 
> though. Let me know if that would be useful (and/or if there is another 
> kernel that you would like me to test with) and I'll try to fit it in.
> 

I tried 2.6.34-rc4 (64bits) on an old machine I had lying at home.



00:0a.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev a3)
	Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
	Latency: 0 (250ns min, 5000ns max)
	Interrupt: pin A routed to IRQ 21
	Region 0: Memory at d4000000 (32-bit, non-prefetchable) [size=4K]
	Region 1: I/O ports at b000 [size=8]
	Capabilities: [44] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable+ DSel=0 DScale=0 PME-
	Kernel driver in use: forcedeth
	Kernel modules: forcedeth

I could not reproduce the problem you have.

processor	: 0
vendor_id	: AuthenticAMD
cpu family	: 15
model		: 31
model name	: AMD Athlon(tm) 64 Processor 3200+
stepping	: 0
cpu MHz		: 1000.000
cache size	: 512 KB
fpu		: yes
fpu_exception	: yes
cpuid level	: 1
wp		: yes
flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt lm 3dnowext 3dnow rep_good lahf_lm
bogomips	: 2010.09
TLB size	: 1024 4K pages
clflush size	: 64
cache_alignment	: 64
address sizes	: 40 bits physical, 48 bits virtual
power management: ts fid vid ttp


RAM : 3 Gbytes 

Only strange thing I noticed is ethtool -S results with an insane tx_broadcast

# ethtool -S eth1
NIC statistics:
     tx_bytes: 90388
     tx_zero_rexmt: 348
     tx_one_rexmt: 0
     tx_many_rexmt: 0
     tx_late_collision: 0
     tx_fifo_errors: 0
     tx_carrier_errors: 0
     tx_excess_deferral: 0
     tx_retry_error: 0
     rx_frame_error: 0
     rx_extra_byte: 0
     rx_late_collision: 0
     rx_runt: 0
     rx_frame_too_long: 0
     rx_over_errors: 0
     rx_crc_errors: 0
     rx_frame_align_error: 0
     rx_length_error: 0
     rx_unicast: 413
     rx_multicast: 22
     rx_broadcast: 2
     rx_packets: 437
     rx_errors_total: 0
     tx_errors_total: 0
     tx_deferral: 718
     tx_packets: 718
     rx_bytes: 718
     tx_pause: 718
     rx_pause: 718
     rx_drop_frame: 718
     tx_unicast: 15748
     tx_multicast: 5552
     tx_broadcast: 115174309658

[root@...alhost ~]# ifconfig eth1
eth1      Link encap:Ethernet  HWaddr 00:11:D8:9A:6D:06  
          inet adr:192.168.99.99  Bcast:192.168.99.255  Masque:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:466 errors:0 dropped:0 overruns:0 frame:0
          TX packets:354 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:1000 
          RX bytes:50751 (49.5 KiB)  TX bytes:92974 (90.7 KiB)
          Interruption:21 Adresse de base:0x2000 

[root@...alhost ~]# grep eth1 /proc/interrupts 
 21:        954   IO-APIC-fasteoi   eth1


--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html