| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 23 Jun 2010 10:00:08 -0700
From: Brandon Philips <brandon@...p.org>
To: Mike McCormack <mikem@...g3k.org>
Cc: Stephen Hemminger <shemminger@...ux-foundation.org>,
netdev@...r.kernel.org, davem@...emloft.net
Subject: Re: [PATCH] sky2: enable rx/tx in sky2_phy_reinit()
On 23:57 Tue 22 Jun 2010, Mike McCormack wrote:
> Tested, and verified that it fixes the bug reported.
Thanks for testing Mike.
While testing this I found a new unrelated bug. If I turn off speed
autoneg the interface stops sending packets until I turn off pause
autoneg also.
To illustrate start pinging some machine and run this:
$ ethtool --change eth0 speed 100 duplex full autoneg off
# At this point the ping stops
$ ethtool -A eth0 autoneg off
# Ping starts up again
When I tried capturing packets nothing was coming from the device.
0ea065e52eb6a0f029b5fa5ed2f142be1b66a153 implemeneted the behaviour of
having seperate pause and speed ethtool controls for sky2. Reverting
this (see quick ugly revert below) obviously fixes the issue.
Any ideas on how to fix this in a proper way though?
Cheers,
Brandon
>From 8de50faa1911933dc545f663a24f32d0caeea3b4 Mon Sep 17 00:00:00 2001
From: Brandon Philips <brandon@...p.org>
Date: Wed, 23 Jun 2010 09:56:20 -0700
Subject: [PATCH] sky2: revert "fix pause negotiation"
Revert 0ea065e52eb6a0f029b5fa5ed2f142be1b66a153
---
drivers/net/sky2.c | 31 ++++++++++++-------------------
drivers/net/sky2.h | 2 ++
2 files changed, 14 insertions(+), 19 deletions(-)
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 7985165..a638171 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -333,7 +333,7 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
struct sky2_port *sky2 = netdev_priv(hw->dev[port]);
u16 ctrl, ct1000, adv, pg, ledctrl, ledover, reg;
- if ( (sky2->flags & SKY2_FLAG_AUTO_SPEED) &&
+ if (sky2->autoneg == AUTONEG_ENABLE &&
!(hw->flags & SKY2_HW_NEWER_PHY)) {
u16 ectrl = gm_phy_read(hw, port, PHY_MARV_EXT_CTRL);
@@ -375,7 +375,7 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
ctrl |= PHY_M_PC_MDI_XMODE(PHY_M_PC_ENA_AUTO);
/* downshift on PHY 88E1112 and 88E1149 is changed */
- if ( (sky2->flags & SKY2_FLAG_AUTO_SPEED) &&
+ if (sky2->autoneg == AUTONEG_ENABLE &&
(hw->flags & SKY2_HW_NEWER_PHY)) {
/* set downshift counter to 3x and enable downshift */
ctrl &= ~PHY_M_PC_DSC_MSK;
@@ -420,7 +420,7 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
adv = PHY_AN_CSMA;
reg = 0;
- if (sky2->flags & SKY2_FLAG_AUTO_SPEED) {
+ if (sky2->autoneg == AUTONEG_ENABLE) {
if (sky2_is_copper(hw)) {
if (sky2->advertising & ADVERTISED_1000baseT_Full)
ct1000 |= PHY_M_1000C_AFD;
@@ -435,11 +435,14 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
if (sky2->advertising & ADVERTISED_10baseT_Half)
adv |= PHY_M_AN_10_HD;
+ adv |= copper_fc_adv[sky2->flow_mode];
} else { /* special defines for FIBER (88E1040S only) */
if (sky2->advertising & ADVERTISED_1000baseT_Full)
adv |= PHY_M_AN_1000X_AFD;
if (sky2->advertising & ADVERTISED_1000baseT_Half)
adv |= PHY_M_AN_1000X_AHD;
+
+ adv |= fiber_fc_adv[sky2->flow_mode];
}
/* Restart Auto-negotiation */
@@ -448,8 +451,8 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
/* forced speed/duplex settings */
ct1000 = PHY_M_1000C_MSE;
- /* Disable auto update for duplex flow control and duplex */
- reg |= GM_GPCR_AU_DUP_DIS | GM_GPCR_AU_SPD_DIS;
+ /* Disable auto update for duplex flow control and speed */
+ reg |= GM_GPCR_AU_ALL_DIS;
switch (sky2->speed) {
case SPEED_1000:
@@ -467,15 +470,8 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
ctrl |= PHY_CT_DUP_MD;
} else if (sky2->speed < SPEED_1000)
sky2->flow_mode = FC_NONE;
- }
- if (sky2->flags & SKY2_FLAG_AUTO_PAUSE) {
- if (sky2_is_copper(hw))
- adv |= copper_fc_adv[sky2->flow_mode];
- else
- adv |= fiber_fc_adv[sky2->flow_mode];
- } else {
- reg |= GM_GPCR_AU_FCT_DIS;
+
reg |= gm_fc_disable[sky2->flow_mode];
/* Forward pause packets to GMAC? */
@@ -620,8 +616,7 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
/* no effect on Yukon-XL */
gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl);
- if (!(sky2->flags & SKY2_FLAG_AUTO_SPEED) ||
- sky2->speed == SPEED_100) {
+ if (sky2->autoneg == AUTONEG_DISABLE || sky2->speed == SPEED_100) {
/* turn on 100 Mbps LED (LED_LINK100) */
ledover |= PHY_M_LED_MO_100(MO_LED_ON);
}
@@ -632,7 +627,7 @@ static void sky2_phy_init(struct sky2_hw *hw, unsigned port)
}
/* Enable phy interrupt on auto-negotiation complete (or link up) */
- if (sky2->flags & SKY2_FLAG_AUTO_SPEED)
+ if (sky2->autoneg == AUTONEG_ENABLE)
gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_IS_AN_COMPL);
else
gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK);
@@ -688,9 +683,7 @@ static void sky2_phy_power_down(struct sky2_hw *hw, unsigned port)
/* setup General Purpose Control Register */
gma_write16(hw, port, GM_GP_CTRL,
- GM_GPCR_FL_PASS | GM_GPCR_SPEED_100 |
- GM_GPCR_AU_DUP_DIS | GM_GPCR_AU_FCT_DIS |
- GM_GPCR_AU_SPD_DIS);
+ GM_GPCR_FL_PASS | GM_GPCR_SPEED_100 | GM_GPCR_AU_ALL_DIS);
if (hw->chip_id != CHIP_ID_YUKON_EC) {
if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h
index 084eff2..db0b2ad 100644
--- a/drivers/net/sky2.h
+++ b/drivers/net/sky2.h
@@ -1755,6 +1755,7 @@ enum {
};
#define GM_GPCR_SPEED_1000 (GM_GPCR_GIGS_ENA | GM_GPCR_SPEED_100)
+#define GM_GPCR_AU_ALL_DIS (GM_GPCR_AU_DUP_DIS | GM_GPCR_AU_FCT_DIS|GM_GPCR_AU_SPD_DIS)
/* GM_TX_CTRL 16 bit r/w Transmit Control Register */
enum {
@@ -2247,6 +2248,7 @@ struct sky2_port {
u16 speed; /* SPEED_1000, SPEED_100, ... */
u8 wol; /* WAKE_ bits */
u8 duplex; /* DUPLEX_HALF, DUPLEX_FULL */
+ u8 autoneg; /* AUTONEG_ENABLE, AUTONEG_DISABLE */
u16 flags;
#define SKY2_FLAG_RX_CHECKSUM 0x0001
#define SKY2_FLAG_AUTO_SPEED 0x0002
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists