[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <1283360686.2556.381.camel@edumazet-laptop>
Date: Wed, 01 Sep 2010 19:04:46 +0200
From: Eric Dumazet <eric.dumazet@...il.com>
To: David Miller <davem@...emloft.net>
Cc: netdev <netdev@...r.kernel.org>
Subject: [RFC PATCH net-next-2.6] gro: drivers should feed GRO only with
TCP packets
Many network devices can tell if an incoming frame is a TCP one for a
small cost.
Instead of feeding GRO with all packets, we could filter packets on this
information ?
This should help machines handling a mixed UDP/TCP workload, keeping gro
overhead as small as possible.
patch against tg3 as an example...
Alternative would be to set a bit "is_tcp" on napi_struct to let this
choice being done in network stack, not by each driver.
Signed-off-by: Eric Dumazet <eric.dumazet@...il.com>
---
drivers/net/tg3.c | 22 +++++++++++++++++-----
1 files changed, 17 insertions(+), 5 deletions(-)
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index bc3af78..d530a0a 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -4748,13 +4748,25 @@ static int tg3_rx(struct tg3_napi *tnapi, int budget)
}
}
+ /*
+ * give to GRO stack only TCP frames, with good checksums.
+ */
+ if ((desc->type_flags & RXD_FLAG_IS_TCP) &&
+ skb->ip_summed == CHECKSUM_UNNECESSARY) {
#if TG3_VLAN_TAG_USED
- if (hw_vlan)
- vlan_gro_receive(&tnapi->napi, tp->vlgrp, vtag, skb);
- else
+ if (hw_vlan)
+ vlan_gro_receive(&tnapi->napi, tp->vlgrp, vtag, skb);
+ else
#endif
- napi_gro_receive(&tnapi->napi, skb);
-
+ napi_gro_receive(&tnapi->napi, skb);
+ } else {
+#if TG3_VLAN_TAG_USED
+ if (hw_vlan)
+ vlan_hwaccel_receive_skb(skb, tp->vlgrp, vtag);
+ else
+#endif
+ netif_receive_skb(skb);
+ }
received++;
budget--;
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists