netdev - Re: [PATCH 1/2] of/phylib: Use device tree properties to initialize Marvell PHYs.

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <20101119003929.GA18558@angua.secretlab.ca>
Date:	Thu, 18 Nov 2010 17:39:29 -0700
From:	Grant Likely <grant.likely@...retlab.ca>
To:	David Daney <ddaney@...iumnetworks.com>
Cc:	devicetree-discuss@...ts.ozlabs.org, linux-kernel@...r.kernel.org,
	netdev@...r.kernel.org, Cyril Chemparathy <cyril@...com>,
	Arnaud Patard <arnaud.patard@...-net.org>,
	Benjamin Herrenschmidt <benh@...nel.crashing.org>
Subject: Re: [PATCH 1/2] of/phylib: Use device tree properties to
 initialize Marvell PHYs.

On Thu, Nov 18, 2010 at 03:48:38PM -0800, David Daney wrote:
> On 11/18/2010 12:40 PM, Grant Likely wrote:
> >On Wed, Nov 17, 2010 at 03:54:30PM -0800, David Daney wrote:
> >>Some aspects of PHY initialization are board dependent, things like
> >>indicator LED connections and some clocking modes cannot be determined
> >>by probing.  The dev_flags element of struct phy_device can be used to
> >>control these things if an appropriate value can be passed from the
> >>Ethernet driver.  We run into problems however if the PHY connections
> >>are specified by the device tree.  There is no way for the Ethernet
> >>driver to know what flags it should pass.
> >>
> >>If we are using the device tree, the struct phy_device will be
> >>populated with the device tree node corresponding to the PHY, and we
> >>can extract extra configuration information from there.
> >>
> >>The next question is what should the format of that information be?
> >>It is highly device specific, and the device tree representation
> >>should not be tied to any arbitrary kernel defined constants.  A
> >>straight forward representation is just to specify the exact bits that
> >>should be set using the "marvell,reg-init" property:
> >>
> >>       phy5: ethernet-phy@5 {
> >>	reg =<5>;
> >>	device_type = "ethernet-phy";
> >
> >Some notes:
> >- device_type is only relevant for real openfirmware platforms.  It
> >   should not appear in dts files.
> 
> Documentation/powerpc/dts-bindings/phy.txt says device_type should
> be here.  I can remove it from my patch comment, but should it also
> be removed from the phy.txt file?

Heh, I didn't realize it was there.  Yes, it should be removed from
the phy.txt file.  It is clearly wrong.

> 
> >- This example phy node needs a compatible property
> 
> Ok, what would you suggest?  Something like:
> 
>      compatible = "marvell,88e1145";

Yes.

> 
> I can certainly do that, but I would note that the kernel probes
> these things and would completely ignore the compatible property.

That's okay.

> 
> >- This new binding needs to be documented.  You can use devicetree.org.
> >
> 
> Agreed, I was planning to do that once the patch was approved.
> 
> Where would that go?  Vendor:Marvell, or
> Type:PHY/compatible=marvell,* ... or somewhere else?

The page name should be compatible=marvell,88e1145, and it should be
have the vendor and type tags added so it appears in the category
pages.

g.
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html