| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Tue, 21 Dec 2010 10:34:56 +0300
From: Dan Carpenter <error27@...il.com>
To: Giuseppe Cavallaro <peppe.cavallaro@...com>
Cc: netdev@...r.kernel.org, kernel-janitors@...r.kernel.org
Subject: [patch -next] stmmac: unwind properly in stmmac_dvr_probe()
The original code had a several problems:
*) It had potential null dereferences of "priv" and "res".
*) It released the memory region before it was aquired.
*) It didn't free "ndev" after it was allocated.
*) It didn't call unregister_netdev() after calling stmmac_probe().
Signed-off-by: Dan Carpenter <error27@...il.com>
diff --git a/drivers/net/stmmac/stmmac_main.c b/drivers/net/stmmac/stmmac_main.c
index 20f803d..34a0af3 100644
--- a/drivers/net/stmmac/stmmac_main.c
+++ b/drivers/net/stmmac/stmmac_main.c
@@ -1647,10 +1647,8 @@ static int stmmac_dvr_probe(struct platform_device *pdev)
pr_info("STMMAC driver:\n\tplatform registration... ");
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- ret = -ENODEV;
- goto out;
- }
+ if (!res)
+ return -ENODEV;
pr_info("\tdone!\n");
if (!request_mem_region(res->start, resource_size(res),
@@ -1658,22 +1656,21 @@ static int stmmac_dvr_probe(struct platform_device *pdev)
pr_err("%s: ERROR: memory allocation failed"
"cannot get the I/O addr 0x%x\n",
__func__, (unsigned int)res->start);
- ret = -EBUSY;
- goto out;
+ return -EBUSY;
}
addr = ioremap(res->start, resource_size(res));
if (!addr) {
pr_err("%s: ERROR: memory mapping failed\n", __func__);
ret = -ENOMEM;
- goto out;
+ goto out_release_region;
}
ndev = alloc_etherdev(sizeof(struct stmmac_priv));
if (!ndev) {
pr_err("%s: ERROR: allocating the device\n", __func__);
ret = -ENOMEM;
- goto out;
+ goto out_unmap;
}
SET_NETDEV_DEV(ndev, &pdev->dev);
@@ -1683,8 +1680,8 @@ static int stmmac_dvr_probe(struct platform_device *pdev)
if (ndev->irq == -ENXIO) {
pr_err("%s: ERROR: MAC IRQ configuration "
"information not found\n", __func__);
- ret = -ENODEV;
- goto out;
+ ret = -ENXIO;
+ goto out_free_ndev;
}
priv = netdev_priv(ndev);
@@ -1711,18 +1708,18 @@ static int stmmac_dvr_probe(struct platform_device *pdev)
if (priv->plat->init) {
ret = priv->plat->init(pdev);
if (unlikely(ret))
- goto out;
+ goto out_free_ndev;
}
/* MAC HW revice detection */
ret = stmmac_mac_device_setup(ndev);
if (ret < 0)
- goto out;
+ goto out_plat_exit;
/* Network Device Registration */
ret = stmmac_probe(ndev);
if (ret < 0)
- goto out;
+ goto out_plat_exit;
/* associate a PHY - it is provided by another platform bus */
if (!driver_for_each_device
@@ -1730,7 +1727,7 @@ static int stmmac_dvr_probe(struct platform_device *pdev)
stmmac_associate_phy)) {
pr_err("No PHY device is associated with this MAC!\n");
ret = -ENODEV;
- goto out;
+ goto out_unregister;
}
pr_info("\t%s - (dev. name: %s - id: %d, IRQ #%d\n"
@@ -1741,19 +1738,22 @@ static int stmmac_dvr_probe(struct platform_device *pdev)
pr_debug("\tMDIO bus (id: %d)...", priv->plat->bus_id);
ret = stmmac_mdio_register(ndev);
if (ret < 0)
- goto out;
+ goto out_unregister;
pr_debug("registered!\n");
+ return 0;
-out:
- if (ret < 0) {
- if (priv->plat->exit)
- priv->plat->exit(pdev);
-
- platform_set_drvdata(pdev, NULL);
- release_mem_region(res->start, resource_size(res));
- if (addr != NULL)
- iounmap(addr);
- }
+out_unregister:
+ unregister_netdev(ndev);
+out_plat_exit:
+ if (priv->plat->exit)
+ priv->plat->exit(pdev);
+out_free_ndev:
+ free_netdev(ndev);
+ platform_set_drvdata(pdev, NULL);
+out_unmap:
+ iounmap(addr);
+out_release_region:
+ release_mem_region(res->start, resource_size(res));
return ret;
}
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists