[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1304125404-19376-1-git-send-email-maheshb@google.com>
Date: Fri, 29 Apr 2011 18:03:24 -0700
From: Mahesh Bandewar <maheshb@...gle.com>
To: David Miller <davem@...emloft.net>,
Matt Carlson <mcarlson@...adcom.com>
Cc: netdev <netdev@...r.kernel.org>, Michael Chan <mchan@...adcom.com>,
Ben Hutchings <bhutchings@...arflare.com>,
Michał Mirosław <mirq-linux@...e.qmqm.pl>,
Mahesh Bandewar <maheshb@...gle.com>
Subject: [PATCHv2 2/2] tg3: Add code to allow ethtool to enable/disable loopback.
Signed-off-by: Mahesh Bandewar <maheshb@...gle.com>
---
Changes since v1:
Implemented Matt's suggestions.
(a) Enable this capability on the devices which are capable of MAC-loopback
mode.
(b) check if the device is running before making changes.
(c) check bits before making changes.
drivers/net/tg3.c | 57 +++++++++++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 57 insertions(+), 0 deletions(-)
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index fa57e3d..f6e4c10 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -6319,6 +6319,51 @@ static u32 tg3_fix_features(struct net_device *dev, u32 features)
return features;
}
+static int tg3_set_features(struct net_device *dev, u32 features)
+{
+ struct tg3 *tp = netdev_priv(dev);
+ u32 cur_mode = 0;
+ int err = 0;
+
+ if (!netif_running(dev)) {
+ err = -EAGAIN;
+ goto sfeatures_out;
+ }
+
+ spin_lock_bh(&tp->lock);
+ cur_mode = tr32(MAC_MODE);
+
+ if (features & NETIF_F_LOOPBACK) {
+ if (cur_mode & MAC_MODE_PORT_INT_LPBACK)
+ goto sfeatures_unlock;
+
+ /*
+ * Clear MAC_MODE_HALF_DUPLEX or you won't get packets back in
+ * loopback mode if Half-Duplex mode was negotiated earlier.
+ */
+ cur_mode &= ~MAC_MODE_HALF_DUPLEX;
+
+ /* Enable internal MAC loopback mode */
+ tw32(MAC_MODE, cur_mode | MAC_MODE_PORT_INT_LPBACK);
+ netif_carrier_on(tp->dev);
+ netdev_info(dev, "Internal MAC loopback mode enabled.\n");
+ } else {
+ if (!(cur_mode & MAC_MODE_PORT_INT_LPBACK))
+ goto sfeatures_unlock;
+
+ /* Disable internal MAC loopback mode */
+ tw32(MAC_MODE, cur_mode & ~MAC_MODE_PORT_INT_LPBACK);
+ /* Force link status check */
+ tg3_setup_phy(tp, 1);
+ netdev_info(dev, "Internal MAC loopback mode disabled.\n");
+ }
+sfeatures_unlock:
+ spin_unlock_bh(&tp->lock);
+
+sfeatures_out:
+ return err;
+}
+
static inline void tg3_set_mtu(struct net_device *dev, struct tg3 *tp,
int new_mtu)
{
@@ -15028,6 +15073,7 @@ static const struct net_device_ops tg3_netdev_ops = {
.ndo_tx_timeout = tg3_tx_timeout,
.ndo_change_mtu = tg3_change_mtu,
.ndo_fix_features = tg3_fix_features,
+ .ndo_set_features = tg3_set_features,
#ifdef CONFIG_NET_POLL_CONTROLLER
.ndo_poll_controller = tg3_poll_controller,
#endif
@@ -15044,6 +15090,7 @@ static const struct net_device_ops tg3_netdev_ops_dma_bug = {
.ndo_do_ioctl = tg3_ioctl,
.ndo_tx_timeout = tg3_tx_timeout,
.ndo_change_mtu = tg3_change_mtu,
+ .ndo_set_features = tg3_set_features,
#ifdef CONFIG_NET_POLL_CONTROLLER
.ndo_poll_controller = tg3_poll_controller,
#endif
@@ -15241,6 +15288,16 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
dev->features |= hw_features;
dev->vlan_features |= hw_features;
+ /*
+ * Add loopback capability only for a subset of devices that support
+ * MAC-LOOPBACK. Eventually this need to be enhanced to allow INT-PHY
+ * loopback for the remaining devices.
+ */
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5780 ||
+ !tg3_flag(tp, CPMU_PRESENT))
+ /* Add the loopback capability */
+ dev->hw_features |= NETIF_F_LOOPBACK;
+
if (tp->pci_chip_rev_id == CHIPREV_ID_5705_A1 &&
!tg3_flag(tp, TSO_CAPABLE) &&
!(tr32(TG3PCI_PCISTATE) & PCISTATE_BUS_SPEED_HIGH)) {
--
1.7.3.1
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists