[<prev] [next>] [day] [month] [year] [list]
Message-ID: <1304550311.28342.19.camel@dream>
Date: Wed, 04 May 2011 20:05:11 -0300
From: Kleber Sacilotto de Souza <klebers@...ux.vnet.ibm.com>
To: Breno Leitao <leitao@...ux.vnet.ibm.com>
Cc: "netdev@...r.kernel.org" <netdev@...r.kernel.org>
Subject: [PATCH] ehea: fix wrongly reported speed and port
Currently EHEA reports to ethtool as supporting 10M, 100M, 1G and
10G and connected to FIBRE independent of the hardware configuration.
However, when connected to FIBRE the only supported speed is 10G
full-duplex, and the other speeds and modes are only supported
when connected to twisted pair.
Signed-off-by: Kleber Sacilotto de Souza <klebers@...ux.vnet.ibm.com>
---
drivers/net/ehea/ehea_ethtool.c | 21 +++++++++++++--------
1 files changed, 13 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ehea/ehea_ethtool.c b/drivers/net/ehea/ehea_ethtool.c
index 3e2e734..f3bbdce 100644
--- a/drivers/net/ehea/ehea_ethtool.c
+++ b/drivers/net/ehea/ehea_ethtool.c
@@ -55,15 +55,20 @@ static int ehea_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
cmd->duplex = -1;
}
- cmd->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_1000baseT_Full
- | SUPPORTED_100baseT_Full | SUPPORTED_100baseT_Half
- | SUPPORTED_10baseT_Full | SUPPORTED_10baseT_Half
- | SUPPORTED_Autoneg | SUPPORTED_FIBRE);
-
- cmd->advertising = (ADVERTISED_10000baseT_Full | ADVERTISED_Autoneg
- | ADVERTISED_FIBRE);
+ if (cmd->speed == SPEED_10000) {
+ cmd->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE);
+ cmd->advertising = (ADVERTISED_10000baseT_Full | ADVERTISED_FIBRE);
+ cmd->port = PORT_FIBRE;
+ } else {
+ cmd->supported = (SUPPORTED_1000baseT_Full | SUPPORTED_100baseT_Full
+ | SUPPORTED_100baseT_Half | SUPPORTED_10baseT_Full
+ | SUPPORTED_10baseT_Half | SUPPORTED_Autoneg
+ | SUPPORTED_TP);
+ cmd->advertising = (ADVERTISED_1000baseT_Full | ADVERTISED_Autoneg
+ | ADVERTISED_TP);
+ cmd->port = PORT_TP;
+ }
- cmd->port = PORT_FIBRE;
cmd->autoneg = port->autoneg == 1 ? AUTONEG_ENABLE : AUTONEG_DISABLE;
return 0;
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists