| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1305753000-14933-2-git-send-email-decot@google.com>
Date: Wed, 18 May 2011 14:10:00 -0700
From: David Decotigny <decot@...gle.com>
To: "David S. Miller" <davem@...emloft.net>,
Joe Perches <joe@...ches.com>,
Szymon Janc <szymon@...c.net.pl>, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org
Cc: kernel-net-upstream@...gle.com, Sameer Nanda <snanda@...gle.com>,
David Decotigny <decot@...gle.com>
Subject: [PATCH 2/2] forcedeth: allow to silence tx_timeout debug messages
From: Sameer Nanda <snanda@...gle.com>
This change allows to silence most debug messages in case of TX
timeout. These messages don't provide a signare/noise ratio high
enough for production systems and, with ~30kB logged each time, they
tend to add to a cascade effect if the system is already under stress
(memory pressure, disk, etc.).
By default, the debug messages are not displayed but this can be
overriden by setting the debug_tx_timeout module parameter.
Signed-off-by: David Decotigny <decot@...gle.com>
---
drivers/net/forcedeth.c | 93 ++++++++++++++++++++++++++---------------------
1 files changed, 52 insertions(+), 41 deletions(-)
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index 9566567..2c176ff 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -896,6 +896,11 @@ enum {
static int dma_64bit = NV_DMA_64BIT_ENABLED;
/*
+ * Debug output control for tx_timeout
+ */
+static bool debug_tx_timeout = false;
+
+/*
* Crossover Detection
* Realtek 8201 phy + some OEM boards do not work properly.
*/
@@ -2473,56 +2478,59 @@ static void nv_tx_timeout(struct net_device *dev)
u32 status;
union ring_type put_tx;
int saved_tx_limit;
- int i;
if (np->msi_flags & NV_MSI_X_ENABLED)
status = readl(base + NvRegMSIXIrqStatus) & NVREG_IRQSTAT_MASK;
else
status = readl(base + NvRegIrqStatus) & NVREG_IRQSTAT_MASK;
- netdev_info(dev, "Got tx_timeout. irq: %08x\n", status);
+ if (unlikely(debug_tx_timeout)) {
+ int i;
- netdev_info(dev, "Ring at %lx\n", (unsigned long)np->ring_addr);
- netdev_info(dev, "Dumping tx registers\n");
- for (i = 0; i <= np->register_size; i += 32) {
- netdev_info(dev,
- "%3x: %08x %08x %08x %08x %08x %08x %08x %08x\n",
- i,
- readl(base + i + 0), readl(base + i + 4),
- readl(base + i + 8), readl(base + i + 12),
- readl(base + i + 16), readl(base + i + 20),
- readl(base + i + 24), readl(base + i + 28));
- }
- netdev_info(dev, "Dumping tx ring\n");
- for (i = 0; i < np->tx_ring_size; i += 4) {
- if (!nv_optimized(np)) {
- netdev_info(dev,
- "%03x: %08x %08x // %08x %08x // %08x %08x // %08x %08x\n",
- i,
- le32_to_cpu(np->tx_ring.orig[i].buf),
- le32_to_cpu(np->tx_ring.orig[i].flaglen),
- le32_to_cpu(np->tx_ring.orig[i+1].buf),
- le32_to_cpu(np->tx_ring.orig[i+1].flaglen),
- le32_to_cpu(np->tx_ring.orig[i+2].buf),
- le32_to_cpu(np->tx_ring.orig[i+2].flaglen),
- le32_to_cpu(np->tx_ring.orig[i+3].buf),
- le32_to_cpu(np->tx_ring.orig[i+3].flaglen));
- } else {
+ netdev_warn(dev, "Got tx_timeout. irq: %08x\n", status);
+
+ netdev_info(dev, "Ring at %lx\n", (unsigned long)np->ring_addr);
+ netdev_info(dev, "Dumping tx registers\n");
+ for (i = 0; i <= np->register_size; i += 32) {
netdev_info(dev,
- "%03x: %08x %08x %08x // %08x %08x %08x // %08x %08x %08x // %08x %08x %08x\n",
+ "%3x: %08x %08x %08x %08x %08x %08x %08x %08x\n",
i,
- le32_to_cpu(np->tx_ring.ex[i].bufhigh),
- le32_to_cpu(np->tx_ring.ex[i].buflow),
- le32_to_cpu(np->tx_ring.ex[i].flaglen),
- le32_to_cpu(np->tx_ring.ex[i+1].bufhigh),
- le32_to_cpu(np->tx_ring.ex[i+1].buflow),
- le32_to_cpu(np->tx_ring.ex[i+1].flaglen),
- le32_to_cpu(np->tx_ring.ex[i+2].bufhigh),
- le32_to_cpu(np->tx_ring.ex[i+2].buflow),
- le32_to_cpu(np->tx_ring.ex[i+2].flaglen),
- le32_to_cpu(np->tx_ring.ex[i+3].bufhigh),
- le32_to_cpu(np->tx_ring.ex[i+3].buflow),
- le32_to_cpu(np->tx_ring.ex[i+3].flaglen));
+ readl(base + i + 0), readl(base + i + 4),
+ readl(base + i + 8), readl(base + i + 12),
+ readl(base + i + 16), readl(base + i + 20),
+ readl(base + i + 24), readl(base + i + 28));
+ }
+ netdev_info(dev, "Dumping tx ring\n");
+ for (i = 0; i < np->tx_ring_size; i += 4) {
+ if (!nv_optimized(np)) {
+ netdev_info(dev,
+ "%03x: %08x %08x // %08x %08x // %08x %08x // %08x %08x\n",
+ i,
+ le32_to_cpu(np->tx_ring.orig[i].buf),
+ le32_to_cpu(np->tx_ring.orig[i].flaglen),
+ le32_to_cpu(np->tx_ring.orig[i+1].buf),
+ le32_to_cpu(np->tx_ring.orig[i+1].flaglen),
+ le32_to_cpu(np->tx_ring.orig[i+2].buf),
+ le32_to_cpu(np->tx_ring.orig[i+2].flaglen),
+ le32_to_cpu(np->tx_ring.orig[i+3].buf),
+ le32_to_cpu(np->tx_ring.orig[i+3].flaglen));
+ } else {
+ netdev_info(dev,
+ "%03x: %08x %08x %08x // %08x %08x %08x // %08x %08x %08x // %08x %08x %08x\n",
+ i,
+ le32_to_cpu(np->tx_ring.ex[i].bufhigh),
+ le32_to_cpu(np->tx_ring.ex[i].buflow),
+ le32_to_cpu(np->tx_ring.ex[i].flaglen),
+ le32_to_cpu(np->tx_ring.ex[i+1].bufhigh),
+ le32_to_cpu(np->tx_ring.ex[i+1].buflow),
+ le32_to_cpu(np->tx_ring.ex[i+1].flaglen),
+ le32_to_cpu(np->tx_ring.ex[i+2].bufhigh),
+ le32_to_cpu(np->tx_ring.ex[i+2].buflow),
+ le32_to_cpu(np->tx_ring.ex[i+2].flaglen),
+ le32_to_cpu(np->tx_ring.ex[i+3].bufhigh),
+ le32_to_cpu(np->tx_ring.ex[i+3].buflow),
+ le32_to_cpu(np->tx_ring.ex[i+3].flaglen));
+ }
}
}
@@ -6006,6 +6014,9 @@ module_param(phy_cross, int, S_IRUGO);
MODULE_PARM_DESC(phy_cross, "Phy crossover detection for Realtek 8201 phy is enabled by setting to 1 and disabled by setting to 0.");
module_param(phy_power_down, int, S_IRUGO);
MODULE_PARM_DESC(phy_power_down, "Power down phy and disable link when interface is down (1), or leave phy powered up (0).");
+module_param(debug_tx_timeout, bool, S_IRUGO);
+MODULE_PARM_DESC(debug_tx_timeout,
+ "Dump tx related registers and ring when tx_timeout happens");
MODULE_AUTHOR("Manfred Spraul <manfred@...orfullife.com>");
MODULE_DESCRIPTION("Reverse Engineered nForce ethernet driver");
--
1.7.3.1
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists