[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <1f8bdbed8f110b214daaff8350ae9bde68c9cc12.1308076047.git.joe@perches.com>
Date: Tue, 14 Jun 2011 11:57:47 -0700
From: Joe Perches <joe@...ches.com>
To: linux-kernel@...r.kernel.org
Cc: Sebastian Pöhn <sebastian.belden@...glemail.com>,
netdev@...r.kernel.org
Subject: [PATCH] gianfar: Use pr_<level>, netdev_<level> and netif_<level>
Use the current logging styles.
Add #define DEBUG to get same output for <foo>_dbg messages.
Convert a few bare printks to pr_err.
Fix a likely copy/paste defect where a test was done with RX values:
if (num_rx_qs > MAX_RX_QS) {
but TX limits were emitted:
printk(KERN_ERR "num_rx_qs(=%d) greater than MAX_RX_QS(=%d)\n",
num_tx_qs, MAX_TX_QS);
Signed-off-by: Joe Perches <joe@...ches.com>
---
Sebastian Poehn <sebastian.belden@...glemail.com>
recently submitted a largish patch to gianfar as well.
This may conflict with it.
drivers/net/gianfar.c | 113 +++++++++++++++++-----------------------
drivers/net/gianfar_ethtool.c | 21 ++++----
2 files changed, 58 insertions(+), 76 deletions(-)
diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index 3564551..69cd3d3 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -62,6 +62,9 @@
* The driver then cleans up the buffer.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+#define DEBUG
+
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/errno.h>
@@ -213,8 +216,7 @@ static int gfar_init_bds(struct net_device *ndev)
} else {
skb = gfar_new_skb(ndev);
if (!skb) {
- pr_err("%s: Can't allocate RX buffers\n",
- ndev->name);
+ netdev_err(ndev, "Can't allocate RX buffers\n");
goto err_rxalloc_fail;
}
rx_queue->rx_skbuff[j] = skb;
@@ -258,9 +260,8 @@ static int gfar_alloc_skb_resources(struct net_device *ndev)
sizeof(struct rxbd8) * priv->total_rx_ring_size,
&addr, GFP_KERNEL);
if (!vaddr) {
- if (netif_msg_ifup(priv))
- pr_err("%s: Could not allocate buffer descriptors!\n",
- ndev->name);
+ netif_err(priv, ifup, ndev,
+ "Could not allocate buffer descriptors!\n");
return -ENOMEM;
}
@@ -290,9 +291,8 @@ static int gfar_alloc_skb_resources(struct net_device *ndev)
tx_queue->tx_skbuff = kmalloc(sizeof(*tx_queue->tx_skbuff) *
tx_queue->tx_ring_size, GFP_KERNEL);
if (!tx_queue->tx_skbuff) {
- if (netif_msg_ifup(priv))
- pr_err("%s: Could not allocate tx_skbuff\n",
- ndev->name);
+ netif_err(priv, ifup, ndev,
+ "Could not allocate tx_skbuff\n");
goto cleanup;
}
@@ -306,9 +306,8 @@ static int gfar_alloc_skb_resources(struct net_device *ndev)
rx_queue->rx_ring_size, GFP_KERNEL);
if (!rx_queue->rx_skbuff) {
- if (netif_msg_ifup(priv))
- pr_err("%s: Could not allocate rx_skbuff\n",
- ndev->name);
+ netif_err(priv, ifup, ndev,
+ "Could not allocate rx_skbuff\n");
goto cleanup;
}
@@ -628,9 +627,9 @@ static int gfar_of_init(struct platform_device *ofdev, struct net_device **pdev)
num_tx_qs = tx_queues ? *tx_queues : 1;
if (num_tx_qs > MAX_TX_QS) {
- printk(KERN_ERR "num_tx_qs(=%d) greater than MAX_TX_QS(=%d)\n",
- num_tx_qs, MAX_TX_QS);
- printk(KERN_ERR "Cannot do alloc_etherdev, aborting\n");
+ pr_err("num_tx_qs(=%d) greater than MAX_TX_QS(=%d)\n",
+ num_tx_qs, MAX_TX_QS);
+ pr_err("Cannot do alloc_etherdev, aborting\n");
return -EINVAL;
}
@@ -638,9 +637,9 @@ static int gfar_of_init(struct platform_device *ofdev, struct net_device **pdev)
num_rx_qs = rx_queues ? *rx_queues : 1;
if (num_rx_qs > MAX_RX_QS) {
- printk(KERN_ERR "num_rx_qs(=%d) greater than MAX_RX_QS(=%d)\n",
- num_tx_qs, MAX_TX_QS);
- printk(KERN_ERR "Cannot do alloc_etherdev, aborting\n");
+ pr_err("num_rx_qs(=%d) greater than MAX_RX_QS(=%d)\n",
+ num_rx_qs, MAX_RX_QS);
+ pr_err("Cannot do alloc_etherdev, aborting\n");
return -EINVAL;
}
@@ -1163,8 +1162,7 @@ static int gfar_probe(struct platform_device *ofdev)
err = register_netdev(dev);
if (err) {
- printk(KERN_ERR "%s: Cannot register net device, aborting.\n",
- dev->name);
+ pr_err("%s: Cannot register net device, aborting\n", dev->name);
goto register_fail;
}
@@ -1215,17 +1213,17 @@ static int gfar_probe(struct platform_device *ofdev)
gfar_init_sysfs(dev);
/* Print out the device info */
- printk(KERN_INFO DEVICE_NAME "%pM\n", dev->name, dev->dev_addr);
+ netdev_info(dev, "mac: %pM\n", dev->dev_addr);
/* Even more device info helps when determining which kernel */
/* provided which set of benchmarks. */
- printk(KERN_INFO "%s: Running with NAPI enabled\n", dev->name);
+ netdev_info(dev, "Running with NAPI enabled\n");
for (i = 0; i < priv->num_rx_queues; i++)
- printk(KERN_INFO "%s: RX BD ring size for Q[%d]: %d\n",
- dev->name, i, priv->rx_queue[i]->rx_ring_size);
+ netdev_info(dev, "RX BD ring size for Q[%d]: %d\n",
+ i, priv->rx_queue[i]->rx_ring_size);
for(i = 0; i < priv->num_tx_queues; i++)
- printk(KERN_INFO "%s: TX BD ring size for Q[%d]: %d\n",
- dev->name, i, priv->tx_queue[i]->tx_ring_size);
+ netdev_info(dev, "TX BD ring size for Q[%d]: %d\n",
+ i, priv->tx_queue[i]->tx_ring_size);
return 0;
@@ -1858,34 +1856,30 @@ static int register_grp_irqs(struct gfar_priv_grp *grp)
* Transmit, and Receive */
if ((err = request_irq(grp->interruptError, gfar_error, 0,
grp->int_name_er,grp)) < 0) {
- if (netif_msg_intr(priv))
- printk(KERN_ERR "%s: Can't get IRQ %d\n",
- dev->name, grp->interruptError);
+ netif_err(priv, intr, dev, "Can't get IRQ %d\n",
+ grp->interruptError);
goto err_irq_fail;
}
if ((err = request_irq(grp->interruptTransmit, gfar_transmit,
0, grp->int_name_tx, grp)) < 0) {
- if (netif_msg_intr(priv))
- printk(KERN_ERR "%s: Can't get IRQ %d\n",
- dev->name, grp->interruptTransmit);
+ netif_err(priv, intr, dev, "Can't get IRQ %d\n",
+ grp->interruptTransmit);
goto tx_irq_fail;
}
if ((err = request_irq(grp->interruptReceive, gfar_receive, 0,
grp->int_name_rx, grp)) < 0) {
- if (netif_msg_intr(priv))
- printk(KERN_ERR "%s: Can't get IRQ %d\n",
- dev->name, grp->interruptReceive);
+ netif_err(priv, intr, dev, "Can't get IRQ %d\n",
+ grp->interruptReceive);
goto rx_irq_fail;
}
} else {
if ((err = request_irq(grp->interruptTransmit, gfar_interrupt, 0,
grp->int_name_tx, grp)) < 0) {
- if (netif_msg_intr(priv))
- printk(KERN_ERR "%s: Can't get IRQ %d\n",
- dev->name, grp->interruptTransmit);
+ netif_err(priv, intr, dev, "Can't get IRQ %d\n",
+ grp->interruptTransmit);
goto err_irq_fail;
}
}
@@ -2354,9 +2348,7 @@ static int gfar_change_mtu(struct net_device *dev, int new_mtu)
frame_size += VLAN_HLEN;
if ((frame_size < 64) || (frame_size > JUMBO_FRAME_SIZE)) {
- if (netif_msg_drv(priv))
- printk(KERN_ERR "%s: Invalid MTU setting\n",
- dev->name);
+ netif_err(priv, drv, dev, "Invalid MTU setting\n");
return -EINVAL;
}
@@ -2776,9 +2768,7 @@ int gfar_clean_rx_ring(struct gfar_priv_rx_q *rx_queue, int rx_work_limit)
gfar_process_frame(dev, skb, amount_pull);
} else {
- if (netif_msg_rx_err(priv))
- printk(KERN_WARNING
- "%s: Missing skb!\n", dev->name);
+ netif_warn(priv, rx_err, dev, "Missing skb!\n");
rx_queue->stats.rx_dropped++;
priv->extra_stats.rx_skbmissing++;
}
@@ -2981,10 +2971,9 @@ static void adjust_link(struct net_device *dev)
ecntrl &= ~(ECNTRL_R100);
break;
default:
- if (netif_msg_link(priv))
- printk(KERN_WARNING
- "%s: Ack! Speed (%d) is not 10/100/1000!\n",
- dev->name, phydev->speed);
+ netif_warn(priv, link, dev,
+ "Ack! Speed (%d) is not 10/100/1000!\n",
+ phydev->speed);
break;
}
@@ -3189,8 +3178,8 @@ static irqreturn_t gfar_error(int irq, void *grp_id)
/* Hmm... */
if (netif_msg_rx_err(priv) || netif_msg_tx_err(priv))
- printk(KERN_DEBUG "%s: error interrupt (ievent=0x%08x imask=0x%08x)\n",
- dev->name, events, gfar_read(®s->imask));
+ netdev_dbg(dev, "error interrupt (ievent=0x%08x imask=0x%08x)\n",
+ events, gfar_read(®s->imask));
/* Update the error counters */
if (events & IEVENT_TXE) {
@@ -3203,9 +3192,8 @@ static irqreturn_t gfar_error(int irq, void *grp_id)
if (events & IEVENT_XFUN) {
unsigned long flags;
- if (netif_msg_tx_err(priv))
- printk(KERN_DEBUG "%s: TX FIFO underrun, "
- "packet dropped.\n", dev->name);
+ netif_dbg(priv, tx_err, dev,
+ "TX FIFO underrun, packet dropped\n");
dev->stats.tx_dropped++;
priv->extra_stats.tx_underrun++;
@@ -3218,8 +3206,7 @@ static irqreturn_t gfar_error(int irq, void *grp_id)
unlock_tx_qs(priv);
local_irq_restore(flags);
}
- if (netif_msg_tx_err(priv))
- printk(KERN_DEBUG "%s: Transmit Error\n", dev->name);
+ netif_dbg(priv, tx_err, dev, "Transmit Error\n");
}
if (events & IEVENT_BSY) {
dev->stats.rx_errors++;
@@ -3227,29 +3214,25 @@ static irqreturn_t gfar_error(int irq, void *grp_id)
gfar_receive(irq, grp_id);
- if (netif_msg_rx_err(priv))
- printk(KERN_DEBUG "%s: busy error (rstat: %x)\n",
- dev->name, gfar_read(®s->rstat));
+ netif_dbg(priv, rx_err, dev, "busy error (rstat: %x)\n",
+ gfar_read(®s->rstat));
}
if (events & IEVENT_BABR) {
dev->stats.rx_errors++;
priv->extra_stats.rx_babr++;
- if (netif_msg_rx_err(priv))
- printk(KERN_DEBUG "%s: babbling RX error\n", dev->name);
+ netif_dbg(priv, rx_err, dev, "babbling RX error\n");
}
if (events & IEVENT_EBERR) {
priv->extra_stats.eberr++;
- if (netif_msg_rx_err(priv))
- printk(KERN_DEBUG "%s: bus error\n", dev->name);
+ netif_dbg(priv, rx_err, dev, "bus error\n");
}
- if ((events & IEVENT_RXC) && netif_msg_rx_status(priv))
- printk(KERN_DEBUG "%s: control frame\n", dev->name);
+ if (events & IEVENT_RXC)
+ netif_dbg(priv, rx_status, dev, "control frame\n");
if (events & IEVENT_BABT) {
priv->extra_stats.tx_babt++;
- if (netif_msg_tx_err(priv))
- printk(KERN_DEBUG "%s: babbling TX error\n", dev->name);
+ netif_dbg(priv, tx_err, dev, "babbling TX error\n");
}
return IRQ_HANDLED;
}
diff --git a/drivers/net/gianfar_ethtool.c b/drivers/net/gianfar_ethtool.c
index 493d743..92d7ac0 100644
--- a/drivers/net/gianfar_ethtool.c
+++ b/drivers/net/gianfar_ethtool.c
@@ -16,6 +16,8 @@
* by reference.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/errno.h>
@@ -375,13 +377,13 @@ static int gfar_scoalesce(struct net_device *dev, struct ethtool_coalesce *cvals
/* Check the bounds of the values */
if (cvals->rx_coalesce_usecs > GFAR_MAX_COAL_USECS) {
pr_info("Coalescing is limited to %d microseconds\n",
- GFAR_MAX_COAL_USECS);
+ GFAR_MAX_COAL_USECS);
return -EINVAL;
}
if (cvals->rx_max_coalesced_frames > GFAR_MAX_COAL_FRAMES) {
pr_info("Coalescing is limited to %d frames\n",
- GFAR_MAX_COAL_FRAMES);
+ GFAR_MAX_COAL_FRAMES);
return -EINVAL;
}
@@ -404,13 +406,13 @@ static int gfar_scoalesce(struct net_device *dev, struct ethtool_coalesce *cvals
/* Check the bounds of the values */
if (cvals->tx_coalesce_usecs > GFAR_MAX_COAL_USECS) {
pr_info("Coalescing is limited to %d microseconds\n",
- GFAR_MAX_COAL_USECS);
+ GFAR_MAX_COAL_USECS);
return -EINVAL;
}
if (cvals->tx_max_coalesced_frames > GFAR_MAX_COAL_FRAMES) {
pr_info("Coalescing is limited to %d frames\n",
- GFAR_MAX_COAL_FRAMES);
+ GFAR_MAX_COAL_FRAMES);
return -EINVAL;
}
@@ -464,8 +466,7 @@ static int gfar_sringparam(struct net_device *dev, struct ethtool_ringparam *rva
return -EINVAL;
if (!is_power_of_2(rvals->rx_pending)) {
- printk("%s: Ring sizes must be a power of 2\n",
- dev->name);
+ netdev_err(dev, "Ring sizes must be a power of 2\n");
return -EINVAL;
}
@@ -473,8 +474,7 @@ static int gfar_sringparam(struct net_device *dev, struct ethtool_ringparam *rva
return -EINVAL;
if (!is_power_of_2(rvals->tx_pending)) {
- printk("%s: Ring sizes must be a power of 2\n",
- dev->name);
+ netdev_err(dev, "Ring sizes must be a power of 2\n");
return -EINVAL;
}
@@ -700,7 +700,7 @@ static int gfar_ethflow_to_filer_table(struct gfar_private *priv, u64 ethflow, u
cmp_rqfpr = RQFPR_IPV6 |RQFPR_UDP;
break;
default:
- printk(KERN_ERR "Right now this class is not supported\n");
+ pr_err("Right now this class is not supported\n");
return 0;
}
@@ -715,8 +715,7 @@ static int gfar_ethflow_to_filer_table(struct gfar_private *priv, u64 ethflow, u
}
if (i == MAX_FILER_IDX + 1) {
- printk(KERN_ERR "No parse rule found, ");
- printk(KERN_ERR "can't create hash rules\n");
+ pr_err("No parse rule found, can't create hash rules\n");
return 0;
}
--
1.7.6.rc0
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists