Message-ID: <20110629091300.GC14627@redhat.com>
Date:	Wed, 29 Jun 2011 12:13:00 +0300
From:	"Michael S. Tsirkin" <mst@...hat.com>
To:	Shirley Ma <mashirle@...ibm.com>
Cc:	David Miller <davem@...emloft.net>,
	Eric Dumazet <eric.dumazet@...il.com>,
	Avi Kivity <avi@...hat.com>, Arnd Bergmann <arnd@...db.de>,
	netdev@...r.kernel.org, kvm@...r.kernel.org,
	linux-kernel@...r.kernel.org
Subject: Re: [PATCH V7 4/4 net-next] vhost: vhost TX zero-copy support

On Sat, May 28, 2011 at 12:34:27PM -0700, Shirley Ma wrote:
> Hello Michael,
> 
> In order to use wait for completion in shutting down, seems to me
> another work thread is needed to call vhost_zerocopy_add_used,

Hmm I don't see vhost_zerocopy_add_used here.

> it seems
> too much work to address a minor issue here. Do we really need it?

Assuming you mean vhost_zerocopy_signal_used, here's how I would do it:
add a kref and a completion, signal completion in kref_put
callback, when backend is set - kref_get, on cleanup,
kref_put and then wait_for_completion_interruptible.
Where's the need for another thread coming from?

If you like, post a patch with busywait + a FIXME comment,
and I can write up a patch on top.

(BTW, ideally the function that does the signalling should be
in core networking bits so that it's still around
even if the vhost module gets removed).

> Right now, the approach I am using is to ignore outstanding userspace
> buffers during shutting down if any, the device might DMAed some wrong
> data to the wire, do we really care?
> 
> Thanks
> Shirley

I think so, yes, guest is told that memory can be reused so
it might put the credit card number or whatever there :)

> ------------
> 
> This patch maintains the outstanding userspace buffers in the 
> sequence it is delivered to vhost. The outstanding userspace buffers 
> will be marked as done once the lower device buffers DMA has finished. 
> This is monitored through last reference of kfree_skb callback. Two
> buffer index are used for this purpose.
> 
> The vhost passes the userspace buffers info to lower device skb 
> through message control. Since there will be some done DMAs when
> entering vhost handle_tx. The worse case is all buffers in the vq are
> in pending/done status, so we need to notify guest to release DMA done 
> buffers first before get any new buffers from the vq.
> 
> Signed-off-by: Shirley <xma@...ibm.com>
> ---
> 
>  drivers/vhost/net.c   |   46 +++++++++++++++++++++++++++++++++++++++++++++-
>  drivers/vhost/vhost.c |   47 +++++++++++++++++++++++++++++++++++++++++++++++
>  drivers/vhost/vhost.h |   15 +++++++++++++++
>  3 files changed, 107 insertions(+), 1 deletions(-)
> 
> diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c
> index 2f7c76a..e2eaba6 100644
> --- a/drivers/vhost/net.c
> +++ b/drivers/vhost/net.c
> @@ -32,6 +32,11 @@
>   * Using this limit prevents one virtqueue from starving others. */
>  #define VHOST_NET_WEIGHT 0x80000
>  
> +/* MAX number of TX used buffers for outstanding zerocopy */
> +#define VHOST_MAX_PEND 128
> +/* change it to 256 when small message size performance issue is addressed */
> +#define VHOST_GOODCOPY_LEN 2048
> +
>  enum {
>  	VHOST_NET_VQ_RX = 0,
>  	VHOST_NET_VQ_TX = 1,
> @@ -151,6 +156,10 @@ static void handle_tx(struct vhost_net *net)
>  	hdr_size = vq->vhost_hlen;
>  
>  	for (;;) {
> +		/* Release DMAs done buffers first */
> +		if (atomic_read(&vq->refcnt) > VHOST_MAX_PEND)
> +			vhost_zerocopy_signal_used(vq, false);
> +
>  		head = vhost_get_vq_desc(&net->dev, vq, vq->iov,
>  					 ARRAY_SIZE(vq->iov),
>  					 &out, &in,
> @@ -166,6 +175,12 @@ static void handle_tx(struct vhost_net *net)
>  				set_bit(SOCK_ASYNC_NOSPACE, &sock->flags);
>  				break;
>  			}
> +			/* If more outstanding DMAs, queue the work */
> +			if (atomic_read(&vq->refcnt) > VHOST_MAX_PEND) {
> +				tx_poll_start(net, sock);
> +				set_bit(SOCK_ASYNC_NOSPACE, &sock->flags);
> +				break;
> +			}
>  			if (unlikely(vhost_enable_notify(vq))) {
>  				vhost_disable_notify(vq);
>  				continue;
> @@ -188,6 +203,26 @@ static void handle_tx(struct vhost_net *net)
>  			       iov_length(vq->hdr, s), hdr_size);
>  			break;
>  		}
> +		/* use msg_control to pass vhost zerocopy ubuf info to skb */
> +		if (sock_flag(sock->sk, SOCK_ZEROCOPY)) {
> +			vq->heads[vq->upend_idx].id = head;
> +			if (len < VHOST_GOODCOPY_LEN)
> +				/* copy don't need to wait for DMA done */
> +				vq->heads[vq->upend_idx].len =
> +							VHOST_DMA_DONE_LEN;
> +			else {
> +				struct ubuf_info *ubuf = &vq->ubuf_info[head];
> +
> +				vq->heads[vq->upend_idx].len = len;
> +				ubuf->callback = vhost_zerocopy_callback;
> +				ubuf->arg = vq;
> +				ubuf->desc = vq->upend_idx;
> +				msg.msg_control = ubuf;
> +				msg.msg_controllen = sizeof(ubuf);
> +			}
> +			atomic_inc(&vq->refcnt);
> +			vq->upend_idx = (vq->upend_idx + 1) % UIO_MAXIOV;
> +		}
>  		/* TODO: Check specific error and bomb out unless ENOBUFS? */
>  		err = sock->ops->sendmsg(NULL, sock, &msg, len);
>  		if (unlikely(err < 0)) {
> @@ -198,12 +233,21 @@ static void handle_tx(struct vhost_net *net)
>  		if (err != len)
>  			pr_debug("Truncated TX packet: "
>  				 " len %d != %zd\n", err, len);
> -		vhost_add_used_and_signal(&net->dev, vq, head, 0);
> +		if (!sock_flag(sock->sk, SOCK_ZEROCOPY))
> +			vhost_add_used_and_signal(&net->dev, vq, head, 0);
>  		total_len += len;
>  		if (unlikely(total_len >= VHOST_NET_WEIGHT)) {
>  			vhost_poll_queue(&vq->poll);
>  			break;
>  		}
> +		/* if upend_idx is full, then wait for free more */
> +/*
> +		if (unlikely(vq->upend_idx == vq->done_idx)) {
> +			tx_poll_start(net, sock);
> +			set_bit(SOCK_ASYNC_NOSPACE, &sock->flags);
> +				break;
> +		}
> +*/

What's this BTW?


>  	}
>  
>  	mutex_unlock(&vq->mutex);
> diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c
> index 7aa4eea..b76e42a 100644
> --- a/drivers/vhost/vhost.c
> +++ b/drivers/vhost/vhost.c
> @@ -174,6 +174,9 @@ static void vhost_vq_reset(struct vhost_dev *dev,
>  	vq->call_ctx = NULL;
>  	vq->call = NULL;
>  	vq->log_ctx = NULL;
> +	vq->upend_idx = 0;
> +	vq->done_idx = 0;
> +	atomic_set(&vq->refcnt, 0);
>  }
>  
>  static int vhost_worker(void *data)
> @@ -232,6 +235,8 @@ static long vhost_dev_alloc_iovecs(struct vhost_dev *dev)
>  					  GFP_KERNEL);
>  		dev->vqs[i].heads = kmalloc(sizeof *dev->vqs[i].heads *
>  					    UIO_MAXIOV, GFP_KERNEL);
> +		dev->vqs[i].ubuf_info = kmalloc(sizeof *dev->vqs[i].ubuf_info *
> +					    UIO_MAXIOV, GFP_KERNEL);
>  
>  		if (!dev->vqs[i].indirect || !dev->vqs[i].log ||
>  			!dev->vqs[i].heads)
> @@ -244,6 +249,7 @@ err_nomem:
>  		kfree(dev->vqs[i].indirect);
>  		kfree(dev->vqs[i].log);
>  		kfree(dev->vqs[i].heads);
> +		kfree(dev->vqs[i].ubuf_info);
>  	}
>  	return -ENOMEM;
>  }
> @@ -385,6 +391,30 @@ long vhost_dev_reset_owner(struct vhost_dev *dev)
>  	return 0;
>  }
>  
> +/* In case of DMA done not in order in lower device driver for some reason.
> + * upend_idx is used to track end of used idx, done_idx is used to track head
> + * of used idx. Once lower device DMA done contiguously, we will signal KVM
> + * guest used idx.
> + */
> +void vhost_zerocopy_signal_used(struct vhost_virtqueue *vq, bool shutdown)
> +{
> +	int i, j = 0;
> +
> +	for (i = vq->done_idx; i != vq->upend_idx; i = ++i % UIO_MAXIOV) {
> +		if ((vq->heads[i].len == VHOST_DMA_DONE_LEN) || shutdown) {
> +			vq->heads[i].len = VHOST_DMA_CLEAR_LEN;
> +			vhost_add_used_and_signal(vq->dev, vq,
> +						  vq->heads[i].id, 0);
> +			++j;
> +		} else
> +			break;
> +	}
> +	if (j) {
> +		vq->done_idx = i;
> +		atomic_sub(j, &vq->refcnt);
> +	}
> +}
> +
>  /* Caller should have device mutex */
>  void vhost_dev_cleanup(struct vhost_dev *dev)
>  {
> @@ -395,6 +425,9 @@ void vhost_dev_cleanup(struct vhost_dev *dev)
>  			vhost_poll_stop(&dev->vqs[i].poll);
>  			vhost_poll_flush(&dev->vqs[i].poll);
>  		}
> +		/* Wait for all lower device DMAs done */
> +		if (atomic_read(&dev->vqs[i].refcnt))
> +			vhost_zerocopy_signal_used(&dev->vqs[i], true);
>  		if (dev->vqs[i].error_ctx)
>  			eventfd_ctx_put(dev->vqs[i].error_ctx);
>  		if (dev->vqs[i].error)
> @@ -603,6 +636,10 @@ static long vhost_set_vring(struct vhost_dev *d, int ioctl, void __user *argp)
>  
>  	mutex_lock(&vq->mutex);
>  
> +	/* clean up lower device outstanding DMAs, before setting ring */
> +	if (atomic_read(&vq->refcnt))
> +		vhost_zerocopy_signal_used(vq, true);
> +
>  	switch (ioctl) {
>  	case VHOST_SET_VRING_NUM:
>  		/* Resizing ring with an active backend?
> @@ -1416,3 +1453,13 @@ void vhost_disable_notify(struct vhost_virtqueue *vq)
>  		vq_err(vq, "Failed to enable notification at %p: %d\n",
>  		       &vq->used->flags, r);
>  }
> +
> +void vhost_zerocopy_callback(void *arg)
> +{
> +	struct ubuf_info *ubuf = (struct ubuf_info *)arg;
> +	struct vhost_virtqueue *vq;
> +
> +	vq = (struct vhost_virtqueue *)ubuf->arg;
> +	/* set len = 1 to mark this desc buffers done DMA */
> +	vq->heads[ubuf->desc].len = VHOST_DMA_DONE_LEN;
> +}
> diff --git a/drivers/vhost/vhost.h b/drivers/vhost/vhost.h
> index b3363ae..0b11734 100644
> --- a/drivers/vhost/vhost.h
> +++ b/drivers/vhost/vhost.h
> @@ -13,6 +13,11 @@
>  #include <linux/virtio_ring.h>
>  #include <asm/atomic.h>
>  
> +/* This is for zerocopy, used buffer len is set to 1 when lower device DMA
> + * done */
> +#define VHOST_DMA_DONE_LEN	1
> +#define VHOST_DMA_CLEAR_LEN	0
> +
>  struct vhost_device;
>  
>  struct vhost_work;
> @@ -108,6 +113,14 @@ struct vhost_virtqueue {
>  	/* Log write descriptors */
>  	void __user *log_base;
>  	struct vhost_log *log;
> +	/* vhost zerocopy support */
> +	atomic_t refcnt; /* num of outstanding zerocopy DMAs */
> +	/* last used idx for outstanding DMA zerocopy buffers */
> +	int upend_idx;
> +	/* first used idx for DMA done zerocopy buffers */
> +	int done_idx;
> +	/* an array of userspace buffers info */
> +	struct ubuf_info *ubuf_info;
>  };
>  
>  struct vhost_dev {
> @@ -154,6 +167,8 @@ bool vhost_enable_notify(struct vhost_virtqueue *);
>  
>  int vhost_log_write(struct vhost_virtqueue *vq, struct vhost_log *log,
>  		    unsigned int log_num, u64 len);
> +void vhost_zerocopy_callback(void *arg);
> +void vhost_zerocopy_signal_used(struct vhost_virtqueue *vq, bool shutdown);
>  
>  #define vq_err(vq, fmt, ...) do {                                  \
>  		pr_debug(pr_fmt(fmt), ##__VA_ARGS__);       \
> 
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Powered by blists - more mailing lists