netdev - [PATCH net v4 3/4] forcedeth: Improve stats counters

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <89fdc051c9f2289c56fe4f3e901ebc171ed2778d.1320463771.git.david.decotigny@google.com>
Date:	Fri,  4 Nov 2011 21:04:41 -0700
From:	David Decotigny <david.decotigny@...gle.com>
To:	netdev@...r.kernel.org, linux-kernel@...r.kernel.org
Cc:	"David S. Miller" <davem@...emloft.net>,
	Ian Campbell <ian.campbell@...rix.com>,
	Eric Dumazet <eric.dumazet@...il.com>,
	Jeff Kirsher <jeffrey.t.kirsher@...el.com>,
	Jiri Pirko <jpirko@...hat.com>, Joe Perches <joe@...ches.com>,
	Szymon Janc <szymon@...c.net.pl>,
	Mandeep Baines <msb@...gle.com>,
	David Decotigny <david.decotigny@...gle.com>
Subject: [PATCH net v4 3/4] forcedeth: Improve stats counters

From: Mandeep Baines <msb@...gle.com>

Rx byte count was off; instead use the hardware's count.  Tx packet
count was counting pre-TSO packets; instead count on-the-wire packets.
Report hardware dropped frame count as rx_fifo_errors.

- The count of transmitted packets reported by the forcedeth driver
  reports pre-TSO (TCP Segmentation Offload) packet counts and not the
  count of the number of packets sent on the wire. This change fixes
  the forcedeth driver to report the correct count. Fixed the code by
  copying the count stored in the NIC H/W to the value reported by the
  driver.

- Count rx_drop_frame errors as rx_fifo_errors:
  We see a lot of rx_drop_frame errors if we disable the rx bottom-halves
  for too long.  Normally, rx_fifo_errors would be counted in this case.
  The rx_drop_frame error count is private to forcedeth and is not
  reported by ifconfig or sysfs.  The rx_fifo_errors count is currently
  unused in the forcedeth driver.  It is reported by ifconfig as overruns.
  This change reports rx_drop_frame errors as rx_fifo_errors.



Signed-off-by: David Decotigny <david.decotigny@...gle.com>
---
 drivers/net/ethernet/nvidia/forcedeth.c |    4 ++++
 1 files changed, 4 insertions(+), 0 deletions(-)

diff --git a/drivers/net/ethernet/nvidia/forcedeth.c b/drivers/net/ethernet/nvidia/forcedeth.c
index 0bcb18e..fe2ba70 100644
--- a/drivers/net/ethernet/nvidia/forcedeth.c
+++ b/drivers/net/ethernet/nvidia/forcedeth.c
@@ -1682,6 +1682,7 @@ static void nv_get_hw_stats(struct net_device *dev)
 		np->estats.tx_pause += readl(base + NvRegTxPause);
 		np->estats.rx_pause += readl(base + NvRegRxPause);
 		np->estats.rx_drop_frame += readl(base + NvRegRxDropFrame);
+		np->estats.rx_errors_total += np->estats.rx_drop_frame;
 	}
 
 	if (np->driver_data & DEV_HAS_STATISTICS_V3) {
@@ -1706,11 +1707,14 @@ static struct net_device_stats *nv_get_stats(struct net_device *dev)
 		nv_get_hw_stats(dev);
 
 		/* copy to net_device stats */
+		dev->stats.tx_packets = np->estats.tx_packets;
+		dev->stats.rx_bytes = np->estats.rx_bytes;
 		dev->stats.tx_bytes = np->estats.tx_bytes;
 		dev->stats.tx_fifo_errors = np->estats.tx_fifo_errors;
 		dev->stats.tx_carrier_errors = np->estats.tx_carrier_errors;
 		dev->stats.rx_crc_errors = np->estats.rx_crc_errors;
 		dev->stats.rx_over_errors = np->estats.rx_over_errors;
+		dev->stats.rx_fifo_errors = np->estats.rx_drop_frame;
 		dev->stats.rx_errors = np->estats.rx_errors_total;
 		dev->stats.tx_errors = np->estats.tx_errors_total;
 	}
-- 
1.7.3.1

--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html