| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1321870127-15541-1-git-send-email-AriesLee@jmicron.com>
Date: Mon, 21 Nov 2011 18:08:47 +0800
From: AriesLee <AriesLee@...cron.com>
To: Aries Lee <ariesleeILan@...il.com>,
Guo-Fu Tseng <cooldavid@...ldavid.org>, netdev@...r.kernel.org
Cc: AriesLee <AriesLee@...cron.com>
Subject: [PATCH 1/1] PHY configuration for compatible issue
To perform PHY calibration and set a different EA value by chip ID,
Whenever the NIC chip power on, ie booting or resuming, we need to
force HW to calibrate PHY parameter again, and also set a proper EA
value which gather from experiment.
Those procedures help to reduce compatible issues(NIC is unable to link
up in some special case) in giga speed.
Signed-off-by: AriesLee <AriesLee@...cron.com>
---
drivers/net/ethernet/jme.c | 113 ++++++++++++++++++++++++++++++++++++++++++-
drivers/net/ethernet/jme.h | 19 +++++++
2 files changed, 129 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/jme.c b/drivers/net/ethernet/jme.c
index df3ab83..4d217b8 100644
--- a/drivers/net/ethernet/jme.c
+++ b/drivers/net/ethernet/jme.c
@@ -1744,6 +1744,112 @@ jme_phy_off(struct jme_adapter *jme)
jme_new_phy_off(jme);
}
+static void
+jme_phy_specreg_read(struct jme_adapter *jme, u32 specreg, u32 *phy_data)
+{
+ u32 phy_addr;
+
+ phy_addr = JM_PHY_SPEC_REG_READ | specreg;
+ jme_mdio_write(jme->dev, jme->mii_if.phy_id, JM_PHY_SPEC_ADDR_REG,
+ phy_addr);
+ *phy_data = jme_mdio_read(jme->dev, jme->mii_if.phy_id,
+ JM_PHY_SPEC_DATA_REG);
+}
+
+static void
+jme_phy_specreg_write(struct jme_adapter *jme, u32 ext_reg, u32 phy_data)
+{
+ u32 phy_addr;
+
+ phy_addr = JM_PHY_SPEC_REG_WRITE | ext_reg;
+ jme_mdio_write(jme->dev, jme->mii_if.phy_id, JM_PHY_SPEC_DATA_REG,
+ phy_data);
+ jme_mdio_write(jme->dev, jme->mii_if.phy_id, JM_PHY_SPEC_ADDR_REG,
+ phy_addr);
+}
+
+static int
+jme_phy_calibration(struct jme_adapter *jme)
+{
+ u32 ctrl1000, phy_data;
+
+ jme_phy_off(jme);
+ jme_phy_on(jme);
+ /* Enabel PHY test mode 1 */
+ ctrl1000 = jme_mdio_read(jme->dev, jme->mii_if.phy_id, MII_CTRL1000);
+ ctrl1000 &= ~PHY_GAD_TEST_MODE_MSK;
+ ctrl1000 |= PHY_GAD_TEST_MODE_1;
+ jme_mdio_write(jme->dev, jme->mii_if.phy_id, MII_CTRL1000, ctrl1000);
+
+ jme_phy_specreg_read(jme, JM_PHY_EXT_COMM_2_REG, &phy_data);
+ phy_data &= ~JM_PHY_EXT_COMM_2_CALI_MODE_0;
+ phy_data |= JM_PHY_EXT_COMM_2_CALI_LATCH |
+ JM_PHY_EXT_COMM_2_CALI_ENABLE;
+ jme_phy_specreg_write(jme, JM_PHY_EXT_COMM_2_REG, phy_data);
+ msleep(20);
+ jme_phy_specreg_read(jme, JM_PHY_EXT_COMM_2_REG, &phy_data);
+ phy_data &= ~(JM_PHY_EXT_COMM_2_CALI_ENABLE |
+ JM_PHY_EXT_COMM_2_CALI_MODE_0 |
+ JM_PHY_EXT_COMM_2_CALI_LATCH);
+ jme_phy_specreg_write(jme, JM_PHY_EXT_COMM_2_REG, phy_data);
+
+ /* Disable PHY test mode */
+ ctrl1000 = jme_mdio_read(jme->dev, jme->mii_if.phy_id, MII_CTRL1000);
+ ctrl1000 &= ~PHY_GAD_TEST_MODE_MSK;
+ jme_mdio_write(jme->dev, jme->mii_if.phy_id, MII_CTRL1000, ctrl1000);
+ return 0;
+}
+
+static int
+jme_phy_setEA(struct jme_adapter *jme)
+{
+ u32 phy_comm0 = 0, phy_comm1 = 0;
+ u8 nic_ctrl;
+
+ pci_read_config_byte(jme->pdev, PCI_PRIV_SHARE_NICCTRL, &nic_ctrl);
+ if ((nic_ctrl & 0x3) == JME_FLAG_PHYEA_ENABLE)
+ return 0;
+
+ switch (jme->pdev->device) {
+ case PCI_DEVICE_ID_JMICRON_JMC250:
+ if (((jme->chip_main_rev == 5) &&
+ ((jme->chip_sub_rev == 0) || (jme->chip_sub_rev == 1) ||
+ (jme->chip_sub_rev == 3))) ||
+ (jme->chip_main_rev >= 6)) {
+ phy_comm0 = 0x008A;
+ phy_comm1 = 0x4109;
+ }
+ if ((jme->chip_main_rev == 3) &&
+ ((jme->chip_sub_rev == 1) || (jme->chip_sub_rev == 2)))
+ phy_comm0 = 0xE088;
+ break;
+ case PCI_DEVICE_ID_JMICRON_JMC260:
+ if (((jme->chip_main_rev == 5) &&
+ ((jme->chip_sub_rev == 0) || (jme->chip_sub_rev == 1) ||
+ (jme->chip_sub_rev == 3))) ||
+ (jme->chip_main_rev >= 6)) {
+ phy_comm0 = 0x008A;
+ phy_comm1 = 0x4109;
+ }
+ if ((jme->chip_main_rev == 3) &&
+ ((jme->chip_sub_rev == 1) || (jme->chip_sub_rev == 2)))
+ phy_comm0 = 0xE088;
+ if ((jme->chip_main_rev == 2) && (jme->chip_sub_rev == 0))
+ phy_comm0 = 0x608A;
+ if ((jme->chip_main_rev == 2) && (jme->chip_sub_rev == 2))
+ phy_comm0 = 0x408A;
+ break;
+ default:
+ return -ENODEV;
+ }
+ if (phy_comm0)
+ jme_phy_specreg_write(jme, JM_PHY_EXT_COMM_0_REG, phy_comm0);
+ if (phy_comm1)
+ jme_phy_specreg_write(jme, JM_PHY_EXT_COMM_1_REG, phy_comm1);
+
+ return 0;
+}
+
static int
jme_open(struct net_device *netdev)
{
@@ -1769,7 +1875,8 @@ jme_open(struct net_device *netdev)
jme_set_settings(netdev, &jme->old_ecmd);
else
jme_reset_phy_processor(jme);
-
+ jme_phy_calibration(jme);
+ jme_phy_setEA(jme);
jme_reset_link(jme);
return 0;
@@ -3184,7 +3291,8 @@ jme_resume(struct device *dev)
jme_set_settings(netdev, &jme->old_ecmd);
else
jme_reset_phy_processor(jme);
-
+ jme_phy_calibration(jme);
+ jme_phy_setEA(jme);
jme_start_irq(jme);
netif_device_attach(netdev);
@@ -3239,4 +3347,3 @@ MODULE_DESCRIPTION("JMicron JMC2x0 PCI Express Ethernet driver");
MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_VERSION);
MODULE_DEVICE_TABLE(pci, jme_pci_tbl);
-
diff --git a/drivers/net/ethernet/jme.h b/drivers/net/ethernet/jme.h
index 02ea27c..4304072 100644
--- a/drivers/net/ethernet/jme.h
+++ b/drivers/net/ethernet/jme.h
@@ -760,6 +760,25 @@ enum jme_rxmcs_bits {
RXMCS_CHECKSUM,
};
+/* Extern PHY common register 2 */
+
+#define PHY_GAD_TEST_MODE_1 0x00002000
+#define PHY_GAD_TEST_MODE_MSK 0x0000E000
+#define JM_PHY_SPEC_REG_READ 0x00004000
+#define JM_PHY_SPEC_REG_WRITE 0x00008000
+#define PHY_CALIBRATION_DELAY 20
+#define JM_PHY_SPEC_ADDR_REG 0x1E
+#define JM_PHY_SPEC_DATA_REG 0x1F
+
+#define JM_PHY_EXT_COMM_0_REG 0x30
+#define JM_PHY_EXT_COMM_1_REG 0x31
+#define JM_PHY_EXT_COMM_2_REG 0x32
+#define JM_PHY_EXT_COMM_2_CALI_ENABLE 0x01
+#define JM_PHY_EXT_COMM_2_CALI_MODE_0 0x02
+#define JM_PHY_EXT_COMM_2_CALI_LATCH 0x10
+#define PCI_PRIV_SHARE_NICCTRL 0xF5
+#define JME_FLAG_PHYEA_ENABLE 0x2
+
/*
* Wakeup Frame setup interface registers
*/
--
1.7.4.4
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists