| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <4EDED071.40900@linux.vnet.ibm.com>
Date: Wed, 07 Dec 2011 10:33:21 +0800
From: Michael Wang <wangyun@...ux.vnet.ibm.com>
To: "e1000-devel@...ts.sourceforge.net"
<e1000-devel@...ts.sourceforge.net>
CC: "netdev@...r.kernel.org" <netdev@...r.kernel.org>,
Michael Wang <wangyun@...ux.vnet.ibm.com>,
Jeff Kirsher <jeffrey.t.kirsher@...el.com>,
"wangyunlinux@...il.com" <wangyunlinux@...il.com>,
Jesse Brandeburg <jesse.brandeburg@...el.com>
Subject: [PATCH v2] e1000e: Assign true and false to bool type variable instead
of 1 and 0
From: Michael Wang <wangyun@...ux.vnet.ibm.com>
Use true and false instead of 1 and 0 when assign value to a bool type
variable.
This patch is try to keep the style of driver, and according to David's
suggestion on patch "e1000e: Avoid wrong check on TX hang":
http://marc.info/?l=linux-netdev&m=132296931201839&w=2
v2: add more description
Signed-off-by: Michael Wang <wangyun@...ux.vnet.ibm.com>
---
drivers/net/ethernet/intel/e1000e/netdev.c | 34
++++++++++++++--------------
1 files changed, 17 insertions(+), 17 deletions(-)
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c
b/drivers/net/ethernet/intel/e1000e/netdev.c
index a855db1..2e5e423 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -875,7 +875,7 @@ static bool e1000_clean_rx_irq(struct e1000_adapter
*adapter,
u32 length, staterr;
unsigned int i;
int cleaned_count = 0;
- bool cleaned = 0;
+ bool cleaned = false;
unsigned int total_rx_bytes = 0, total_rx_packets = 0;
i = rx_ring->next_to_clean;
@@ -904,7 +904,7 @@ static bool e1000_clean_rx_irq(struct e1000_adapter
*adapter,
next_buffer = &rx_ring->buffer_info[i];
- cleaned = 1;
+ cleaned = true;
cleaned_count++;
dma_unmap_single(&pdev->dev,
buffer_info->dma,
@@ -1150,7 +1150,7 @@ static bool e1000_clean_tx_irq(struct
e1000_adapter *adapter)
* Detect a transmit hang in hardware, this serializes the
* check with the clearing of time_stamp and movement of i
*/
- adapter->detect_tx_hung = 0;
+ adapter->detect_tx_hung = false;
if (tx_ring->buffer_info[i].time_stamp &&
time_after(jiffies, tx_ring->buffer_info[i].time_stamp
+ (adapter->tx_timeout_factor * HZ)) &&
@@ -1185,7 +1185,7 @@ static bool e1000_clean_rx_irq_ps(struct
e1000_adapter *adapter,
unsigned int i, j;
u32 length, staterr;
int cleaned_count = 0;
- bool cleaned = 0;
+ bool cleaned = false;
unsigned int total_rx_bytes = 0, total_rx_packets = 0;
i = rx_ring->next_to_clean;
@@ -1211,7 +1211,7 @@ static bool e1000_clean_rx_irq_ps(struct
e1000_adapter *adapter,
next_buffer = &rx_ring->buffer_info[i];
- cleaned = 1;
+ cleaned = true;
cleaned_count++;
dma_unmap_single(&pdev->dev, buffer_info->dma,
adapter->rx_ps_bsize0, DMA_FROM_DEVICE);
@@ -1628,7 +1628,7 @@ static irqreturn_t e1000_intr_msi(int irq, void *data)
*/
if (icr & E1000_ICR_LSC) {
- hw->mac.get_link_status = 1;
+ hw->mac.get_link_status = true;
/*
* ICH8 workaround-- Call gig speed drop workaround on cable
* disconnect (LSC) before accessing any PHY registers
@@ -1694,7 +1694,7 @@ static irqreturn_t e1000_intr(int irq, void *data)
*/
if (icr & E1000_ICR_LSC) {
- hw->mac.get_link_status = 1;
+ hw->mac.get_link_status = true;
/*
* ICH8 workaround-- Call gig speed drop workaround on cable
* disconnect (LSC) before accessing any PHY registers
@@ -1751,7 +1751,7 @@ static irqreturn_t e1000_msix_other(int irq, void
*data)
if (icr & E1000_ICR_OTHER) {
if (!(icr & E1000_ICR_LSC))
goto no_link_interrupt;
- hw->mac.get_link_status = 1;
+ hw->mac.get_link_status = true;
/* guard against interrupt when we're going down */
if (!test_bit(__E1000_DOWN, &adapter->state))
mod_timer(&adapter->watchdog_timer, jiffies + 1);
@@ -3327,7 +3327,7 @@ void e1000e_reset(struct e1000_adapter *adapter)
fc->pause_time = 0xFFFF;
else
fc->pause_time = E1000_FC_PAUSE_TIME;
- fc->send_xon = 1;
+ fc->send_xon = true;
fc->current_mode = fc->requested_mode;
switch (hw->mac.type) {
@@ -4183,7 +4183,7 @@ static void e1000_print_link_info(struct
e1000_adapter *adapter)
static bool e1000e_has_link(struct e1000_adapter *adapter)
{
struct e1000_hw *hw = &adapter->hw;
- bool link_active = 0;
+ bool link_active = false;
s32 ret_val = 0;
/*
@@ -4198,7 +4198,7 @@ static bool e1000e_has_link(struct e1000_adapter
*adapter)
ret_val = hw->mac.ops.check_for_link(hw);
link_active = !hw->mac.get_link_status;
} else {
- link_active = 1;
+ link_active = true;
}
break;
case e1000_media_type_fiber:
@@ -4297,7 +4297,7 @@ static void e1000_watchdog_task(struct work_struct
*work)
if (link) {
if (!netif_carrier_ok(netdev)) {
- bool txb2b = 1;
+ bool txb2b = true;
/* Cancel scheduled suspend requests. */
pm_runtime_resume(netdev->dev.parent);
@@ -4333,11 +4333,11 @@ static void e1000_watchdog_task(struct
work_struct *work)
adapter->tx_timeout_factor = 1;
switch (adapter->link_speed) {
case SPEED_10:
- txb2b = 0;
+ txb2b = false;
adapter->tx_timeout_factor = 16;
break;
case SPEED_100:
- txb2b = 0;
+ txb2b = false;
adapter->tx_timeout_factor = 10;
break;
}
@@ -4473,7 +4473,7 @@ link_up:
e1000e_flush_descriptors(adapter);
/* Force detection of hung controller every watchdog period */
- adapter->detect_tx_hung = 1;
+ adapter->detect_tx_hung = true;
/*
* With 82571 controllers, LAA may be overwritten due to controller
@@ -6134,8 +6134,8 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
INIT_WORK(&adapter->print_hang_task, e1000_print_hw_hang);
/* Initialize link parameters. User can change them with ethtool */
- adapter->hw.mac.autoneg = 1;
- adapter->fc_autoneg = 1;
+ adapter->hw.mac.autoneg = true;
+ adapter->fc_autoneg = true;
adapter->hw.fc.requested_mode = e1000_fc_default;
adapter->hw.fc.current_mode = e1000_fc_default;
adapter->hw.phy.autoneg_advertised = 0x2f;
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists