netdev - How to deal with a PHY configuration related to the board?

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20120214092606.GE4723@ldesroches-Latitude-E6320>
Date:	Tue, 14 Feb 2012 10:26:06 +0100
From:	Ludovic Desroches <ludovic.desroches@...el.com>
To:	linux-arm-kernel@...ts.infradead.org, netdev@...r.kernel.org
Cc:	"Ferre, Nicolas" <nicolas.ferre@...el.com>
Subject: How to deal with a PHY configuration related to the board?

Hello,

I am using a Micrel KSZ9021RN PHY and I would like to configure some registers
as 'RGMII Clock and Control Pad Skew' and 'RGMII RX Data Pad Skew'.
So the values of these registers are board dependant and I wondering what is
the proper way to set them.
It seems there is no platform data usable for this case. Having a quick look
to other PHYs, the situation seems the same.

Can you give me some clues about how to do this? Did I miss anything which
allow to do this?

Thanks

Regards

Ludovic
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html