[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20120214094339.GA4338@sapphire.tkos.co.il>
Date: Tue, 14 Feb 2012 11:43:39 +0200
From: Baruch Siach <baruch@...s.co.il>
To: Ludovic Desroches <ludovic.desroches@...el.com>
Cc: linux-arm-kernel@...ts.infradead.org, netdev@...r.kernel.org,
"Ferre, Nicolas" <nicolas.ferre@...el.com>
Subject: Re: How to deal with a PHY configuration related to the board?
Hi Ludovic,
On Tue, Feb 14, 2012 at 10:26:06AM +0100, Ludovic Desroches wrote:
> I am using a Micrel KSZ9021RN PHY and I would like to configure some
> registers
> as 'RGMII Clock and Control Pad Skew' and 'RGMII RX Data Pad Skew'.
> So the values of these registers are board dependant and I wondering what is
> the proper way to set them.
> It seems there is no platform data usable for this case. Having a quick look
> to other PHYs, the situation seems the same.
>
> Can you give me some clues about how to do this? Did I miss anything which
> allow to do this?
See ksz9021rn_phy_fixup() in arch/arm/mach-imx/mach-imx6q.c.
baruch
--
http://baruch.siach.name/blog/ ~. .~ Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
- baruch@...s.co.il - tel: +972.2.679.5364, http://www.tkos.co.il -
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists