[<prev] [next>] [day] [month] [year] [list]
Message-Id: <1340207924-19474-1-git-send-email-mkl@pengutronix.de>
Date: Wed, 20 Jun 2012 17:58:44 +0200
From: Marc Kleine-Budde <mkl@...gutronix.de>
To: davem@...emloft.net
Cc: netdev@...r.kernel.org, linux-can@...r.kernel.org,
Marc Kleine-Budde <mkl@...gutronix.de>,
Federico Vaga <federico.vaga@...il.com>
Subject: [PATCH] can: c_can_pci: fix compilation on non HAVE_CLK archs
In commit:
5b92da0 c_can_pci: generic module for C_CAN/D_CAN on PCI
the c_can_pci driver has been added. It uses clk_*() functions
resulting in a link error on archs without clock support. This
patch removed these clk_() functions as these parts of the driver
are not tested.
Cc: Federico Vaga <federico.vaga@...il.com>
Signed-off-by: Marc Kleine-Budde <mkl@...gutronix.de>
---
drivers/net/can/c_can/c_can_pci.c | 29 +++++++----------------------
1 file changed, 7 insertions(+), 22 deletions(-)
diff --git a/drivers/net/can/c_can/c_can_pci.c b/drivers/net/can/c_can/c_can_pci.c
index 914aecf..1011146 100644
--- a/drivers/net/can/c_can/c_can_pci.c
+++ b/drivers/net/can/c_can/c_can_pci.c
@@ -13,7 +13,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/netdevice.h>
-#include <linux/clk.h>
#include <linux/pci.h>
#include <linux/can/dev.h>
@@ -30,7 +29,7 @@ struct c_can_pci_data {
enum c_can_dev_id type;
/* Set the register alignment in the memory */
enum c_can_pci_reg_align reg_align;
- /* Set the frequency if clk is not usable */
+ /* Set the frequency */
unsigned int freq;
};
@@ -71,7 +70,6 @@ static int __devinit c_can_pci_probe(struct pci_dev *pdev,
struct c_can_priv *priv;
struct net_device *dev;
void __iomem *addr;
- struct clk *clk;
int ret;
ret = pci_enable_device(pdev);
@@ -113,18 +111,11 @@ static int __devinit c_can_pci_probe(struct pci_dev *pdev,
priv->base = addr;
if (!c_can_pci_data->freq) {
- /* get the appropriate clk */
- clk = clk_get(&pdev->dev, NULL);
- if (IS_ERR(clk)) {
- dev_err(&pdev->dev, "no clock defined\n");
- ret = -ENODEV;
- goto out_free_c_can;
- }
- priv->can.clock.freq = clk_get_rate(clk);
- priv->priv = clk;
+ dev_err(&pdev->dev, "no clock frequency defined\n");
+ ret = -ENODEV;
+ goto out_free_c_can;
} else {
priv->can.clock.freq = c_can_pci_data->freq;
- priv->priv = NULL;
}
/* Configure CAN type */
@@ -138,7 +129,7 @@ static int __devinit c_can_pci_probe(struct pci_dev *pdev,
break;
default:
ret = -EINVAL;
- goto out_free_clock;
+ goto out_free_c_can;
}
/* Configure access to registers */
@@ -153,14 +144,14 @@ static int __devinit c_can_pci_probe(struct pci_dev *pdev,
break;
default:
ret = -EINVAL;
- goto out_free_clock;
+ goto out_free_c_can;
}
ret = register_c_can_dev(dev);
if (ret) {
dev_err(&pdev->dev, "registering %s failed (err=%d)\n",
KBUILD_MODNAME, ret);
- goto out_free_clock;
+ goto out_free_c_can;
}
dev_dbg(&pdev->dev, "%s device registered (regs=%p, irq=%d)\n",
@@ -168,9 +159,6 @@ static int __devinit c_can_pci_probe(struct pci_dev *pdev,
return 0;
-out_free_clock:
- if (priv->priv)
- clk_put(priv->priv);
out_free_c_can:
pci_set_drvdata(pdev, NULL);
free_c_can_dev(dev);
@@ -193,9 +181,6 @@ static void __devexit c_can_pci_remove(struct pci_dev *pdev)
unregister_c_can_dev(dev);
- if (priv->priv)
- clk_put(priv->priv);
-
pci_set_drvdata(pdev, NULL);
free_c_can_dev(dev);
--
1.7.10
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists