lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:	Wed, 11 Jul 2012 15:17:42 +0800
From:	Joe Jin <joe.jin@...cle.com>
To:	"Dave, Tushar N" <tushar.n.dave@...el.com>
CC:	"e1000-devel@...ts.sf.net" <e1000-devel@...ts.sf.net>,
	"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
	"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: 82571EB: Detected Hardware Unit Hang

On 07/11/12 15:11, Dave, Tushar N wrote:
>> -----Original Message-----
>> From: Joe Jin [mailto:joe.jin@...cle.com]
>> Sent: Tuesday, July 10, 2012 10:03 PM
>> To: Dave, Tushar N
>> Cc: e1000-devel@...ts.sf.net; netdev@...r.kernel.org; linux-
>> kernel@...r.kernel.org
>> Subject: Re: 82571EB: Detected Hardware Unit Hang
>>
>> On 07/11/12 12:05, Dave, Tushar N wrote:
>>> When you said you had this issue with RHEL5 and RHEL6 drivers, have you
>> install RHEl5/6 kernel and reproduced it? If so I think I should install
>> RHEL6 and try reproduce it locally!
>>>
>> Yes I reproduced this on both RHEL5 and RHEL6.
>>
>> So far I tried to scp big file (~1GB) will hit it at once.
>>
>> Thanks,
>> Joe
> 
> Joe,
> Can you please send lspci -vvv output for failing port before issue occurs.
> Thanks.
> 
# lspci -s 05:00.0 -vvv
05:00.0 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet Controller (Copper) (rev 06)
	Subsystem: Oracle Corporation x4 PCI-Express Quad Gigabit Ethernet UTP Low Profile Adapter
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 256 bytes
	Interrupt: pin B routed to IRQ 80
	Region 0: Memory at fbde0000 (32-bit, non-prefetchable) [size=128K]
	Region 1: Memory at fbdc0000 (32-bit, non-prefetchable) [size=128K]
	Region 2: I/O ports at dc00 [size=32]
	Expansion ROM at fbda0000 [disabled] [size=128K]
	Capabilities: [c8] Power Management version 2
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
	Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
		Address: 00000000fee21000  Data: 40cb
	Capabilities: [e0] Express (v1) Endpoint, MSI 00
		DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
			ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 512 bytes
		DevSta:	CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend-
		LnkCap:	Port #2, Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0 <4us, L1 <64us
			ClockPM- Surprise- LLActRep- BwNot-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
	Capabilities: [100 v1] Advanced Error Reporting
		UESta:	DLP- SDES- TLP- FCP- CmpltTO+ CmpltAbrt- UnxCmplt- RxOF- MalfTLP+ ECRC- UnsupReq+ ACSViol-
		UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
		UESvrt:	DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
		CEMsk:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
		AERCap:	First Error Pointer: 12, GenCap- CGenEn- ChkCap- ChkEn-
	Capabilities: [140 v1] Device Serial Number 00-15-17-ff-ff-b9-77-9c
	Kernel driver in use: e1000e
	Kernel modules: e1000e


Thanks,
Joe
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ