[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <061C8A8601E8EE4CA8D8FD6990CEA891274EEFD7@ORSMSX102.amr.corp.intel.com>
Date: Wed, 11 Jul 2012 07:37:35 +0000
From: "Dave, Tushar N" <tushar.n.dave@...el.com>
To: Joe Jin <joe.jin@...cle.com>
CC: "e1000-devel@...ts.sf.net" <e1000-devel@...ts.sf.net>,
"netdev@...r.kernel.org" <netdev@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"Dave, Tushar N" <tushar.n.dave@...el.com>
Subject: RE: 82571EB: Detected Hardware Unit Hang
>-----Original Message-----
>From: Joe Jin [mailto:joe.jin@...cle.com]
>Sent: Wednesday, July 11, 2012 12:18 AM
>To: Dave, Tushar N
>Cc: e1000-devel@...ts.sf.net; netdev@...r.kernel.org; linux-
>kernel@...r.kernel.org
>Subject: Re: 82571EB: Detected Hardware Unit Hang
>
>On 07/11/12 15:11, Dave, Tushar N wrote:
>>> -----Original Message-----
>>> From: Joe Jin [mailto:joe.jin@...cle.com]
>>> Sent: Tuesday, July 10, 2012 10:03 PM
>>> To: Dave, Tushar N
>>> Cc: e1000-devel@...ts.sf.net; netdev@...r.kernel.org; linux-
>>> kernel@...r.kernel.org
>>> Subject: Re: 82571EB: Detected Hardware Unit Hang
>>>
>>> On 07/11/12 12:05, Dave, Tushar N wrote:
>>>> When you said you had this issue with RHEL5 and RHEL6 drivers, have
>>>> you
>>> install RHEl5/6 kernel and reproduced it? If so I think I should
>>> install
>>> RHEL6 and try reproduce it locally!
>>>>
>>> Yes I reproduced this on both RHEL5 and RHEL6.
>>>
>>> So far I tried to scp big file (~1GB) will hit it at once.
>>>
>>> Thanks,
>>> Joe
>>
>> Joe,
>> Can you please send lspci -vvv output for failing port before issue
>occurs.
>> Thanks.
>>
># lspci -s 05:00.0 -vvv
>05:00.0 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet
>Controller (Copper) (rev 06)
> Subsystem: Oracle Corporation x4 PCI-Express Quad Gigabit Ethernet
>UTP Low Profile Adapter
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
>Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
><TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0, Cache Line Size: 256 bytes
> Interrupt: pin B routed to IRQ 80
> Region 0: Memory at fbde0000 (32-bit, non-prefetchable) [size=128K]
> Region 1: Memory at fbdc0000 (32-bit, non-prefetchable) [size=128K]
> Region 2: I/O ports at dc00 [size=32]
> Expansion ROM at fbda0000 [disabled] [size=128K]
> Capabilities: [c8] Power Management version 2
> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-
>,D3hot+,D3cold+)
> Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
> Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
> Address: 00000000fee21000 Data: 40cb
> Capabilities: [e0] Express (v1) Endpoint, MSI 00
> DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s
><512ns, L1 <64us
> ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
> DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
>Unsupported-
> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> MaxPayload 128 bytes, MaxReadReq 512 bytes
> DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+
>TransPend-
> LnkCap: Port #2, Speed 2.5GT/s, Width x4, ASPM L0s,
>Latency L0 <4us, L1 <64us
> ClockPM- Surprise- LLActRep- BwNot-
> LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain-
>CommClk-
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+
>DLActive- BWMgmt- ABWMgmt-
> Capabilities: [100 v1] Advanced Error Reporting
> UESta: DLP- SDES- TLP- FCP- CmpltTO+ CmpltAbrt- UnxCmplt-
>RxOF- MalfTLP+ ECRC- UnsupReq+ ACSViol-
> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
>RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
> UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt-
>UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
> CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
> AERCap: First Error Pointer: 12, GenCap- CGenEn- ChkCap-
>ChkEn-
> Capabilities: [140 v1] Device Serial Number 00-15-17-ff-ff-b9-77-9c
> Kernel driver in use: e1000e
> Kernel modules: e1000e
>
>
>Thanks,
>Joe
was this lspci output taken on freshly booted system?
-Tushar
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@...r.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Powered by blists - more mailing lists